Home  About us  Contact
 

Water Plume (water + plume)

Distribution by Scientific Domains
Engineering100%

Kinds of Water Plume

  • ground water plume
    		•

    Selected Abstracts

    Natural Attenuation Reactions at a Uranium Mill Tailings Site, Western U.S.A.

    GROUND WATER, Issue 1 2002
    Chen Zhu
    This paper presents a modeling analysis of the geochemical evolution of a contaminated sandy aquifer at a uranium mill tailings site in the western United States. The tailings pond contains fluids having a pH of 1.5 to 3.5 and high levels of As, Be, Cd, Cr, Pb, Mo, Ni, Se, 226Ra, 228Ra, 230Th, 238U, and 234U. Seepage of tailings fluids into the aquifer has formed a low-pH ground water plume. The reclamation plan is to install a low-permeability cover on the tailings pond to stop the seepage and allow the plume to be attenuated by reactions with the aquifer matrix and flushed by uncontaminated upgradient ground water. To evaluate this reclamation scenario, ground water and sediment core samples were analyzed along one flowpath. Speciation-solubility and mass-transfer modeling revealed two sets of chemical reactions for acid seepage and flushing, respectively. The current concentrations and distribution of ground water constituents can be interpreted as being controlled by stepwise pH-buffer reactions with calcite, amorphous aluminum hydroxide, and amorphous iron hydroxides. These buffer reactions divide the aquifer into zones of near-constant pH, separated by interface zones. For the flushing stage, it is predicted that reactions with surface-bound species will dominate the reaction paths, and more pore volumes are required to neutralize the plume than predicted by models that do not consider surface reactions. Direct mineralogical and surface analysis is needed to substantiate this assertion. [source]

    Monitored Natural Attenuation of Manufactured Gas Plant Tar Mono- and Polycyclic Aromatic Hydrocarbons in Ground Water: A 14-Year Field Study

    GROUND WATER MONITORING & REMEDIATION, Issue 3 2009
    Edward F. Neuhauser
    Site 24 was the subject of a 14-year (5110-day) study of a ground water plume created by the disposal of manufactured gas plant (MGP) tar into a shallow sandy aquifer approximately 25 years prior to the study. The ground water plume in 1988 extended from a well-defined source area to a distance of approximately 400 m down gradient. A system of monitoring wells was installed along six transects that ran perpendicular to the longitudinal axis of the plume centerline. The MGP tar source was removed from the site in 1991 and a 14-year ground water monitored natural attenuation (MNA) study commenced. The program measured the dissolved mono- and polycyclic aromatic hydrocarbons (MAHs and PAHs) periodically over time, which decreased significantly over the 14-year period. Naphthalene decreased to less than 99% of the original dissolved mass, with mass degradation rates of 0.30 per year (half-life 2.3 years). Bulk attenuation rate constants for plume centerline concentrations over time ranged from 0.33 ± 0.09 per year (half-life 2.3 ± 0.8 years) for toluene and 0.45 ± 0.06 per year (half-life 1.6 ± 0.2 years) for naphthalene. The hydrogeologic setting at Site 24, having a sandy aquifer, shallow water table, clay confining layer, and aerobic conditions, was ideal for demonstrating MNA. However, these results demonstrate that MNA is a viable remedial strategy for ground water at sites impacted by MAHs and PAHs after the original source is removed, stabilized, or contained. [source]

    INTEGRATED MANAGEMENT OF IN-FIELD, EDGE-OF-FIELD, AND AFTER-FIELD BUFFERS,

    JOURNAL OF THE AMERICAN WATER RESOURCES ASSOCIATION, Issue 1 2006
    Seth M. Dabney
    ABSTRACT: This review summarizes how conservation benefits are maximized when in-field and edge-of-field buffers are integrated with each other and with other conservation practices such as residue management and grade control structures. Buffers improve both surface and subsurface water quality. Soils under permanent buffer vegetation generally have higher organic carbon concentrations, higher infiltration capacities, and more active microbial populations than similar soils under annual cropping. Sediment can be trapped with rather narrow buffers, but extensive buffers are better at transforming dissolved pollutants. Buffers improve surface runoff water quality most efficiently when flows through them are slow, shallow, and diffuse. Vegetative barriers - narrow strips of dense, erect grass - can slow and spread concentrated runoff. Subsurface processing is best on shallow soils that provide increased hydrologic contact between the ground water plume and buffer vegetation. Vegetated ditches and constructed wetlands can act as "after-field" conservation buffers, processing pollutants that escape from fields. For these buffers to function efficiently, it is critical that in-field and edge-of-field practices limit peak runoff rate and sediment yield in order to maximize contact time with buffer vegetation and minimize the need for cleanout excavation that destroys vegetation and its processing capacity. [source]

    Irreversible Phosphorus Sorption in Septic System Plumes?

    GROUND WATER, Issue 1 2008
    W. D. Robertson
    The mobility of phosphorus (P) in septic system plumes remains a topic of debate because of the considerable reactivity of this constituent. In this study, a septic system plume in Ontario was monitored over a 16-year period with detail that clearly shows the advancing frontal portion of the P plume. This monitoring record provides insight into the extent of secondary P attenuation in the ground water zone beyond that available from previous studies. A P plume 16 m in length developed over the monitoring period with PO4 -P concentrations (3 to 6 mg/L) that approached the concentrations present under the tile bed. Simulations using an analytical model showed that when first-order solute decay was considered to account for the possibility of secondary P attenuation in the ground water zone, field values could only be matched when decay was absent or occurred at an exceedingly slow rate (half-life greater than 30 years). Thus, hypothesized secondary P attenuation mechanisms such as slow recystallization of sorbed P into insoluble metal phosphate minerals, diffusion into microsites, or kinetically slow direct precipitation of P minerals such as hydroxyapatite were inactive in the ground water zone at this site or occurred at rates that were too slow to be observed in the context of the current 16-year study. Desorption tests on sediment samples from below the tile bed indicated a PO4 distribution coefficient (Kd) of 4.8, which implies a P retardation factor of 25, similar to the field apparent value of 37 determined from model calibrations. This example of inactive secondary P attenuation in the ground water zone shows that phosphorus in some ground water plumes can remain mobile and conservative for decades. This has important implications for septic systems located in lakeshore environments when long-term usage scenarios are considered. [source]