Home About us Contact
|
Home About us Contact | ||
|
|
||
Turnover Numbers (turnover + number)
Kinds of Turnover Numbers Selected AbstractsChemInform Abstract: Asymmetric Dihydroxylation of trans-Cinnamates under High-Pressure Conditions: Substantial Increase of Turnover Number.CHEMINFORM, Issue 46 2001Choong Eui Song Abstract ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 100 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a "Full Text" option. The original article is trackable via the "References" option. [source] Improved Turnover Numbers in Palladium-Catalyzed Bisdiene Cyclization-Trapping using N-Heterocyclic Carbene LigandsADVANCED SYNTHESIS & CATALYSIS (PREVIOUSLY: JOURNAL FUER PRAKTISCHE CHEMIE), Issue 15 2005James Abstract An optimized palladium-N-heterocyclic carbene catalyst system effects the palladium-catalyzed bisdiene cyclization-trapping with phenol at the 0.01% catalyst loading level with a TON of 7.6×103 and TOF of 280,h,1, values much higher than typically found for this and related carbocyclizations. The reaction scales well and the trans -substituted six-membered ring product is obtained in excellent yield on a 10-mmole scale without further optimization of the catalyst system or reaction conditions. [source] Palladium-Catalyzed Cross-Coupling Reactions with Zinc, Boron, and Indium Exhibiting High Turnover Numbers (TONs): Use of Bidentate Phosphines and Other Critical Factors in Achieving High TONs.CHEMINFORM, Issue 26 2005Zhihong Huang Abstract For Abstract see ChemInform Abstract in Full Text. [source] Individual molecules of thermostable alkaline phosphatase support different catalytic rates at room temperatureLUMINESCENCE: THE JOURNAL OF BIOLOGICAL AND CHEMICAL LUMINESCENCE, Issue 1 2002Ashley C. Dyck Abstract Thermus thermophilus cells were grown at 70°C, lysed and the lysate subjected to single molecule alkaline phosphatase assays, using a capillary electrophoresis laser-induced fluorescence detection-based method. The enzyme was found to be heterogeneous with respect to catalytic rate when assayed at room temperature. Turnover numbers ranged 12-fold, with an average of 400,±,200 reactions/min for the 80 molecules assayed. Copyright © 2002 John Wiley & Sons, Ltd. [source] Studies of Pyridinyl-Containing 14-Membered Macrocyclic Copper(II) ComplexesEUROPEAN JOURNAL OF INORGANIC CHEMISTRY, Issue 7 2003Sabrina Autzen Abstract Six copper(II) complexes of tetracoordinating, pyridinyl-containing 14-membered macrocycles with varying ratios of nitrogen and oxygen donor atoms were prepared and characterized by IR, UV/Vis, and EPR spectroscopy and cyclic voltammetry. A distorted tetragonal coordination of the copper center in the solid-state was established by X-ray crystallography for the tetraazamacrocyclic complex Cu-3 carrying a methoxybenzyl pendent arm and the trioxaaza complex Cu-6. The superoxide dismutase-like activity of the CuII complexes was investigated by inhibition of NADH oxidation. Although the UV/Vis and EPR spectra of the complexes were strongly affected when the coordinating nitrogen atoms were successively replaced by oxygen atoms, no significant change in their reactivity towards superoxide was observed. In all cases a 1:1 or 1:2 stoichiometry for the reaction with superoxide was found, with the exception of the methoxybenzyl-substituted tetraaza complex, which showed a low catalytic activity with a turnover number of about 10. (© Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2003) [source] The influence of temperature and osmolyte on the catalytic cycle of cytochrome c oxidaseFEBS JOURNAL, Issue 2 2003Jack A. Kornblatt The influence of temperature on cytochrome c oxidase (CCO) catalytic activity was studied in the temperature range 240,308 K. Temperatures below 273 K required the inclusion of the osmolyte ethylene glycol. For steady-state activity between 278 and 308 K the activation energy was 12 kcal·mol,1; the molecular activity or turnover number was 12 s,1 at 280 K in the absence of ethylene glycol. CCO activity was studied between 240 and 277 K in the presence of ethylene glycol. The activation energy was 30 kcal·mol,1; the molecular activity was 1 s,1 at 280 K. Ethylene glycol inhibits CCO by lowering the activity of water. The rate limitation in electron transfer (ET) was not associated with ET into the CCO as cytochrome a was predominantly reduced in the aerobic steady state. The activity of CCO in flash-induced oxidation experiments was studied in the low temperature range in the presence of ethylene glycol. Flash photolysis of the reduced CO complex in the presence of oxygen resulted in three discernable processes. At 273 K the rate constants were 1500 s,1, 150 s,1 and 30 s,1 and these dropped to 220 s,1, 27 s,1 and 3 s,1 at 240 K. The activation energies were 5 kcal·mol,1, 7 kcal·mol,1, and 8 kcal·mol,1, respectively. The fastest rate we ascribe to the oxidation of cytochrome a3, the intermediate rate to cytochrome a oxidation and the slowest rate to the re-reduction of cytochrome a followed by its oxidation. There are two comparisons that are important: (a) with vs. without ethylene glycol and (b) steady state vs. flash-induced oxidation. When one makes these two comparisons it is clear that the CCO only senses the presence of osmolyte during the reductive portion of the catalytic cycle. In the present work that would mean after a flash-induced oxidation and the start of the next reduction/oxidation cycle. [source] The cytochrome cbb3 from Pseudomonas stutzeri displays nitric oxide reductase activityFEBS JOURNAL, Issue 24 2001Elena Forte The cytochrome cbb3 is an isoenzyme in the family of cytochrome c oxidases. This protein purified from Pseudomonas stutzeri displays a cyanide-sensitive nitric oxide reductase activity (Vmax=100±9 mol NO·mol ·min,1 and Km=12±2.5 µm), which is lost upon denaturation. This enzyme is only partially reduced by ascorbate, and readily re-oxidized by NO under anaerobic conditions at a rate consistent with the turnover number for NO consumption. As shown by transient spectroscopy experiments and singular value decomposition (SVD) analysis, these results suggest that the cbb3 -type cytochromes, sharing structural features with bacterial nitric oxide reductases, are the enzymes retaining the highest NO reductase activity within the heme-copper oxidase superfamily. [source] Characterization of carbonic anhydrase from Neisseria gonorrhoeaeFEBS JOURNAL, Issue 6 2001Björn Elleby We have investigated the steady state and equilibrium kinetic properties of carbonic anhydrase from Neisseria gonorrhoeae (NGCA). Qualitatively, the enzyme shows the same kinetic behaviour as the well studied human carbonic anhydrase II (HCA II). This is reflected in the similar pH dependencies of the kinetic parameters for CO2 hydration and the similar behaviour of the kinetics of 18O exchange between CO2 and water at chemical equilibrium. The pH profile of the turnover number, kcat, can be described as a titration curve with an exceptionally high maximal value of 1.7 × 106 s,1 at alkaline pH and a pKa of 7.2. At pH 9, kcat is buffer dependent in a saturable manner, suggesting a ping-pong mechanism with buffer as the second substrate. The ratio kcat/Km is dependent on two ionizations with pKa values of 6.4 and 8.2. However, an 18O-exchange assay identified only one ionizable group in the pH profile of kcat/Km with an apparent pKa of 6.5. The results of a kinetic analysis of a His66,Ala variant of the bacterial enzyme suggest that His66 in NGCA has the same function as a proton shuttle as His64 in HCA II. The kinetic defect in the mutant can partially be overcome by certain buffers, such as imidazole and 1,2-dimethylimidazole. The bacterial enzyme shows similar Ki values for the inhibitors NCO,, SCN, and N3, as HCA II, while CN, and the sulfonamide ethoxzolamide are considerably weaker inhibitors of the bacterial enzyme than of HCA II. The absorption spectra of the adducts of Co(II)-substituted NGCA with acetazolamide, NCO,, SCN,, CN, and N3, resemble the corresponding spectra obtained with human Co(II)-isozymes I and II. Measurements of guanidine hydrochloride (GdnHCl)-induced denaturation reveal a sensitivity of the CO2 hydration activity to the reducing agent tris(2-carboxyethyl)phosphine (TCEP). However, the A292/A260 ratio was not affected by the presence of TCEP, and a structural transition at 2.8,2.9 m GdnHCl was observed. [source] Studies on the oxygen atom transfer reactions of peroxomonosulfate: Catalytic effect of hemiacetalINTERNATIONAL JOURNAL OF CHEMICAL KINETICS, Issue 10 2009S. Shailaja The reaction of peroxomonosulfate (PMS) with glycolic acid (GLYCA), an alpha hydroxy acid, in the presence of Ni(II) ions and formaldehyde was studied in the pH range 4.05,5.89 and at 31°C and 38°C. When formaldehyde and Ni(II) ions concentrations are ,5.0 × 10,4 M to 10.0 × 10,4 M, the reaction is second order in PMS concentration. The rate is catalyzed by formaldehyde, and the observed rate equation is (,d[PMS])/dt = (k,2[HCHO][Ni(II)][PMS]2)/{[H+](1+K2[GLYCA])}. The number of PMS decomposed for each mole of formaldehyde (turnover number) is 5,10, and the major reaction product is oxygen gas. The first step of the reaction mechanism is the formation of hemiacetal by the interaction of HCHO with the hydroxyl group of nickel glycolate. The peroxomonosulfate intermediate of the Ni-hemiacetal reacts with another molecule of PMS in the rate-limiting step to give the product. This reaction is similar to the thermal decomposition of PMS catalyzed by Ni(II) ions. © 2009 Wiley Periodicals, Inc. Int J Chem Kinet 41: 642,649, 2009 [source] Stabilized and Immobilized Bacillus subtilis Arginase for the Biobased Production of Nitrogen-Containing ChemicalsADVANCED SYNTHESIS & CATALYSIS (PREVIOUSLY: JOURNAL FUER PRAKTISCHE CHEMIE), Issue 9 2010Abstract L -Ornithine could serve as an intermediate in the biobased production of 1,4-diaminobutane from L -arginine. Using the concept of biorefinery, L -arginine could become widely available from biomass waste streams via the nitrogen storage polypeptide cyanophycin. Selective hydrolysis of L -arginine to L -ornithine is difficult to perform chemically, therefore the stabilization and immobilization of Bacillus subtilis arginase (EC,3.5.3.1) was studied in a continuously stirred membrane reactor system. Initial pH of the substrate solution, addition of L -aspartic acid and reducing agents all appeared to have an effect on the operational stability of B. subtilis arginase. A remarkably good operational stability (total turnover number, TTN=1.13,108) at the pH of arginine free base (pH,11.0) was observed, which was further improved with the addition of sodium dithionite to the substrate solution (TTN>1,109). B. subtilis arginase was successfully immobilized on three commercially available epoxy-activated supports. Immobilization on Sepabeads EC-EP was most promising, resulting in a recovered activity of 75% and enhanced thermostability. In conclusion, the stabilization and immobilization of B. subtilis arginase has opened up possibilities for its application in the biobased production of nitrogen-containing chemicals as an alternative to the petrochemical production. [source] Highly Enantioselective Hydrogenation of Quinoline and Pyridine Derivatives with Iridium-(P-Phos) CatalystADVANCED SYNTHESIS & CATALYSIS (PREVIOUSLY: JOURNAL FUER PRAKTISCHE CHEMIE), Issue 6 2010Wei-Jun Tang Abstract The use of a chiral iridium catalyst generated in situ from the (cyclooctadiene)iridium chloride dimer, [Ir(COD)Cl]2, the P-Phos ligand [4,4,-bis(diphenylphosphino)-2,2,,6,6,-tetramethoxy-3,3,-bipyridine] and iodine (I2) for the asymmetric hydrogenation of 2,6-substituted quinolines and trisubstituted pyridines [2-substituted 7,8-dihydroquinolin-5(6H)-one derivatives] is reported. The catalyst worked efficiently to hydrogenate a series of quinoline derivatives to provide chiral 1,2,3,4-tetrahydroquinolines in high yields and up to 96% ee. The hydrogenation was carried out at high S/C (substrate to catalyst) ratios of 2000,50000, reaching up to 4000,h,1 TOF (turnover frequency) and up to 43000 TON (turnover number). The catalytic activity is found to be additive-controlled. At low catalyst loadings, decreasing the amount of additive I2 was necessary to maintain the good conversion. The same catalyst system could also enantioselectively hydrogenate trisubstituted pyridines, affording the chiral hexahydroquinolinone derivatives in nearly quantitative yields and up to 99% ee. Interestingly, increasing the amount of I2 favored high reactivity and enantioselectivity in this case. The high efficacy and enantioselectivity enable the present catalyst system of high practical potential. [source] Continuous Hydrogen Generation from Formic Acid: Highly Active and Stable Ruthenium CatalystsADVANCED SYNTHESIS & CATALYSIS (PREVIOUSLY: JOURNAL FUER PRAKTISCHE CHEMIE), Issue 14-15 2009Albert Boddien Abstract The ruthenium-catalyzed decomposition of formic acid was investigated with respect to continuous hydrogen generation and long-term stability of the catalytic systems. A highly active and stable system is presented, which was studied in batch and continuous modes for up to two months. The optimized catalyst system containing N,N -dimethyl- n -hexylamine with an in situ generated catalyst from (benzene)ruthenium dichloride dimer [RuCl2(benzene)]2 and 6 equivalents of 1,2-bis(diphenylphosphino)ethane (dppe) reached at room temperature a total turnover number (TON) of approximatly 260,000 with average turnover frequency (TOF) of about 900,h,1. Only hydrogen and carbon dioxide were detected in the produced gas mixture which makes this system applicable for direct use in fuel cells. [source] TEMPO and Carboxylic Acid Functionalized Imidazolium Salts/Sodium Nitrite: An Efficient, Reusable, Transition Metal-Free Catalytic System for Aerobic Oxidation of AlcoholsADVANCED SYNTHESIS & CATALYSIS (PREVIOUSLY: JOURNAL FUER PRAKTISCHE CHEMIE), Issue 13 2009Cheng-Xia Miao Abstract An effective catalytic system comprising a 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) functionalized imidazolium salt ([Imim-TEMPO]+,X,), a carboxylic acid substituted imidazolium salt ([Imim-COOH]+,X,), and sodium nitrite (NaNO2) was developed for the aerobic oxidation of aliphatic, allylic, heterocyclic and benzylic alcohols to the respective carbonyl compounds with excellent selectivity up to >99%, even at ambient conditions. Notably, the catalyst system could preferentially oxidize a primary alcohol to the aldehyde rather than a secondary alcohol to the ketone. Moreover, the reaction rate is greatly enhanced when a proper amount of water is present. And a high turnover number (TON 5000) is achieved in the present transition metal-free aerobic catalytic system. Additionally, the functionalized imidazolium salts are successfully reused at least four times. This process thus represents a greener pathway for the aerobic oxidation of alcohols into carbonyl compounds by using the present task-specific ionic liquids in place of the toxic and volatile additive, such as hydrogen bromide, bromine, or hydrogen chloride (HBr, Br2 or HCl), which is commonly required for the transition metal-free aerobic oxidation of alcohols. [source] Efficient Aerobic Oxidation of Alcohols using a Hydrotalcite-Supported Gold Nanoparticle CatalystADVANCED SYNTHESIS & CATALYSIS (PREVIOUSLY: JOURNAL FUER PRAKTISCHE CHEMIE), Issue 11-12 2009Takato Mitsudome Abstract Hydrotalcite-supported gold nanoparticles (Au/HT) were found to be a highly efficient heterogeneous catalyst for the aerobic oxidation of alcohols under mild reaction conditions (40,°C, in air). This catalyst system does not require any additives and is applicable to a wide range of alcohols, including less reactive cyclohexanol derivatives. This Au/HT catalyst could also function in the oxidation of 1-phenylethanol under neat conditions; the turnover number (TON) and turnover frequency (TOF) reached 200,000 and 8,300,h,1, respectively. These values are among the highest values compared to those of other reported catalyst systems at high conversion. Moreover, the Au/HT can be recovered by simple filtration and reused without any loss of its activity and selectivity. [source] An Efficient Solvent-Free Route to Silyl Esters and Silyl EthersADVANCED SYNTHESIS & CATALYSIS (PREVIOUSLY: JOURNAL FUER PRAKTISCHE CHEMIE), Issue 9 2009Yuko Ojima Abstract Dinuclear metal complexes, especially (p -cymene)ruthenium dichloride dimer {[RuCl2(p -cymene)]2}, have been found to exhibit high catalytic performance for the dehydrosilylation of various kinds of carboxylic acids and alcohols. The dehydrosilylation with [RuCl2(p -cymene)]2 proceeded efficiently with only one equivalent of silane with respect to substrate (carboxylic acids or alcohols) under solvent-free conditions to give the corresponding silyl esters and ethers in excellent yields with a high turnover number (TON) and frequency (TOF). The 1H,NMR spectrum of a toluene- d8 solution of [RuCl2(p -cymene)]2 and a silane showed a signal assignable to the ruthenium hydride species. In contrast, no new signals were detected in the 1H,NMR spectrum of a toluene- d8 solution of [RuCl2(p -cymene)]2 and a carboxylic acid or an alcohol. Therefore, the ruthenium metal in [RuCl2(p -cymene)]2 activates a silane to afford the hydride intermediate, possibly a silylmetal hydride species. Then, the nucleophilic attack of a substrate (carboxylic acid or alcohol) to the hydride intermediate proceeds to give the corresponding silylated product. The present dehydrosilylation with an optically active silane proceeded exclusively under inversion of stereochemistry at the chiral silicon center, suggesting that the nucleophilic attack of a substrate to the hydride intermediate occurs from the backside of the ruthenium-silicon bond. [source] Bioreactors Based on Monolith-Supported Ionic Liquid Phase for Enzyme Catalysis in Supercritical Carbon DioxideADVANCED SYNTHESIS & CATALYSIS (PREVIOUSLY: JOURNAL FUER PRAKTISCHE CHEMIE), Issue 7 2007Pedro Lozano Abstract Bioreactors with covalently supported ionic liquid phases (SILP) were prepared as polymeric monoliths based on styrene,divinylbenzene or 2-hydroxyethyl methacrylate,ethylene dimethacrylate, and with imidazolium units loadings ranging from 54.7 to 39.8,% wt IL per gram of polymer. The SILPs were able to absorb Candida antarctica lipase B (CALB), leading to highly efficient and robust heterogeneous biocatalysts. The bioreactors were prepared as macroporous monolithic mini-flow systems and tested for the continuous flow synthesis of citronellyl propionate in supercritical carbon dioxide (scCO2) by transesterification. The catalytic activity of these mini-flow-bioreactors remained practically unchanged for seven operational cycles of 5,h each in different supercritical conditions. The best results were obtained when the most hydrophobic monolith, M-SILP- 8 -CALB, was assayed at 80,°C and 10,MPa, reaching a total turnover number (TON) of 35.8×104 mol product/mol enzyme. The results substantially exceeded those obtained for packed-bed reactors with supported silica-CALB-Si-4 catalyst under the same experimental conditions. [source] Oxidative addition of different electrophiles with rhodium(I) carbonyl complexes of unsymmetrical phosphine,phosphine monoselenide ligandsAPPLIED ORGANOMETALLIC CHEMISTRY, Issue 8 2006Pratap Chutia Abstract Dimeric chlorobridge complex [Rh(CO)2Cl]2 reacts with two equivalents of a series of unsymmetrical phosphine,phosphine monoselenide ligands, Ph2P(CH2)nP(Se)Ph2 {n = 1(a), 2(b), 3(c), 4(d)}to form chelate complex [Rh(CO)Cl(P,Se)] (1a) {P,Se = ,2 -(P,Se) coordinated} and non-chelate complexes [Rh(CO)2Cl(P,Se)] (1b,d) {P,Se = ,1 -(P) coordinated}. The complexes 1 undergo oxidative addition reactions with different electrophiles such as CH3I, C2H5I, C6H5CH2Cl and I2 to produce Rh(III) complexes of the type [Rh(COR)ClX(P,Se)] {where R = C2H5 (2a), X = I; R = CH2C6H5 (3a), X = Cl}, [Rh(CO)ClI2(P,Se)] (4a), [Rh(CO)(COCH3)ClI(P,Se)] (5b,d), [Rh(CO)(COH5)ClI-(P,Se)] (6b,d), [Rh(CO)(COCH2C6H5)Cl2(P,Se)] (7b,d) and [Rh(CO)ClI2(P,Se)] (8b,d). The kinetic study of the oxidative addition (OA) reactions of the complexes 1 with CH3I and C2H5I reveals a single stage kinetics. The rate of OA of the complexes varies with the length of the ligand backbone and follows the order 1a > 1b > 1c > 1d. The CH3I reacts with the different complexes at a rate 10,100 times faster than the C2H5I. The catalytic activity of complexes 1b,d for carbonylation of methanol is evaluated and a higher turnover number (TON) is obtained compared with that of the well-known commercial species [Rh(CO)2I2],. Copyright © 2006 John Wiley & Sons, Ltd. [source] Phenol recovery from simulated wastewater using a vertical membrane reactorASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING, Issue 3 2010Manoj Jhanwar Abstract Phenol was recovered from the simulated wastewater in the form of a useful product, allyl phenyl ether, using A-172 membrane as phase-transfer catalyst in a batch and a continuous membrane reactor. The effects of temperature, agitation rates and flow rates of aqueous and organic phases, and concentrations of phenol and allyl bromide on the yield of allyl phenyl ether in the organic phase and phenol removal in the aqueous phase after the reaction were studied. Activation energy and turnover number of the reaction were calculated as well. In the batch mode, the phenol concentration in the treated aqueous phase was found to be < 2 ppm, reduced from 5000 ppm, and more than 99% of the phenol was recovered in the form of allyl phenyl ether after reacting for 180 min. In a continuous mode, the phenol concentration can be reduced from 5000 to 100 ppm in the steady state operation of the reactor. Copyright © 2009 Curtin University of Technology and John Wiley & Sons, Ltd. [source] A hidden square-root boundary between growth rate and biomass yieldBIOTECHNOLOGY & BIOENGINEERING, Issue 1 2009Wilson W. Wong Abstract Although the theoretical value of biomass yield can be calculated from metabolic network stoichiometry, the growth rate is difficult to predict. Since the rate and yield can vary independently, no simple relationship has been discovered between these two variables. In this work, we analyzed the well-accepted enzyme kinetics and uncovered a hidden boundary for growth rate, which is determined by the square-root of three physiological parameters: biomass yield, the substrate turnover number, and the maximum synthesis rate of the turnover enzyme. Cells cannot grow faster than the square-root of the product of these parameters. This analysis is supported by experimental data and involves essentially no assumptions except (i) the cell is not undergoing a downshift transition, (ii) substrate uptake enzyme activity is proportional to its copy number. This simple boundary (not correlation) has escaped notice for many decades and suggests that the yield calculation does not predict the growth rate, but gives an upper limit for the growth rate. The relationship also explains how growth rate is affected by the yield and sheds lights on strain design for product formation. Biotechnol. Bioeng. 2009;102: 73,80. © 2008 Wiley Periodicals, Inc. [source] Application of immobilized bovine enterokinase in repetitive fusion protein cleavage for the production of mucin 1BIOTECHNOLOGY JOURNAL, Issue 11 2009Tina Kubitzki Abstract Bovine enterokinase is a serine protease that catalyzes the hydrolysis of peptide bonds and plays a key role in mammalian metabolism. Because of its high specificity towards the amino acid sequence (Asp)4 -Lys, enterokinase is a potential tool for the cleavage of fusion proteins, which are gaining more importance in biopharmaceutical production. A candidate for adaptive cancer immunotherapy is mucin 1, which is produced recombinantly as a fusion protein in CHO cells. Here, we present the first repetitive application of immobilized enterokinase for the cleavage of the mucin fusion protein. The immobilization enables a facile biocatalytic process due to simplified separation of the biocatalyst and the target protein. Immobilized enterokinase was applied in a maximum of 18 repetitive reactions. The enzyme utilization (total turnover number) was increased significantly 419-fold compared to unbound enzyme by both immobilization and optimization of process conditions. Slight enzyme inactivation throughout the reaction cycles was observed, but was compensated by adjusting the process time accordingly. Thus, complete fusion protein cleavage was achieved. Furthermore, we obtained isolated mucin 1 with a purity of more than 90% by applying a simple and efficient purification process. The presented results demonstrate enterokinase to be an attractive tool for fusion protein cleavage. [source] Homogeneous Stabilization of Pt Nanoparticles in Dendritic Core,Multishell Architectures: Application in Catalytic Hydrogenation Reactions and RecyclingCHEMCATCHEM, Issue 7 2010Juliane Keilitz Abstract Core,multishell architectures are a new approach to homogeneously stabilize metal nanoparticles for harsh conditions. Herein, we present the synthesis and stabilization of Pt nanoparticles in dendritic core,multishell polymers and their application in hydrogenation reactions. The successful recycling of the catalyst was demonstrated for the hydrogenation of methyl crotonate 1 and was either achieved by ultrafiltration or in a two-phase system for at least 14,cycles. Thereby, the total turnover number (TON) was increased to 22,000. In the recycling experiments, low metal leaching into the product (as low as 0.3,ppm) was detected. Additionally, the selective hydrogenation of isophorone 3 was investigated and selectivities of 99:1 for CC versus CO hydrogenation were achieved. [source] Synthetic Scope and Mechanistic Studies of Ru(OH)x/Al2O3 -Catalyzed Heterogeneous Hydrogen-Transfer ReactionsCHEMISTRY - A EUROPEAN JOURNAL, Issue 22 2005Kazuya Yamaguchi Dr. Abstract Three kinds of hydrogen-transfer reactions, namely racemization of chiral secondary alcohols, reduction of carbonyl compounds to alcohols using 2-propanol as a hydrogen donor, and isomerization of allylic alcohols to saturated ketones, are efficiently promoted by the easily prepared and inexpensive supported ruthenium catalyst Ru(OH)x/Al2O3. A wide variety of substrates, such as aromatic, aliphatic, and heterocyclic alcohols or carbonyl compounds, can be converted into the desired products, under anaerobic conditions, in moderate to excellent yields and without the need for additives such as bases. A larger scale, solvent-free reaction is also demonstrated: the isomerization of 1-octen-3-ol with a substrate/catalyst ratio of 20,000/1 shows a very high turnover frequency (TOF) of 18,400 h,1, with a turnover number (TON) that reaches 17,200. The catalysis for these reactions is intrinsically heterogeneous in nature, and the Ru(OH)x/Al2O3 recovered after the reactions can be reused without appreciable loss of catalytic performance. The reaction mechanism of the present Ru(OH)x/Al2O3 -catalyzed hydrogen-transfer reactions were examined with monodeuterated substrates. After the racemization of (S)-1-deuterio-1-phenylethanol in the presence of acetophenone was complete, the deuterium content at the ,-position of the corresponding racemic alcohol was 91,%, whereas no deuterium was incorporated into the ,-position during the racemization of (S)-1-phenylethanol-OD. These results show that direct carbon-to-carbon hydrogen transfer occurs via a metal monohydride for the racemization of chiral secondary alcohols and reduction of carbonyl compounds to alcohols. For the isomerization, the ,-deuterium of 3-deuterio-1-octen-3-ol was selectively relocated at the ,-position of the corresponding ketones (99,% D at the ,-position), suggesting the involvement of a 1,4-addition of ruthenium monohydride species to the ,,,-unsaturated ketone intermediate. The ruthenium monohydride species and the ,,,-unsaturated ketone would be formed through alcoholate formation/,-elimination. Kinetic studies and kinetic isotope effects show that the RuH bond cleavage (hydride transfer) is included in the rate-determining step. [source] Systematic Evaluation of Substituted Cyclopentadienyl Ruthenium Complexes, [(,5 -C5MenH5,n)RuCl(cod)], for Catalytic Cycloadditions of DiynesCHEMISTRY - AN ASIAN JOURNAL, Issue 4 2010Yoshihiko Yamamoto Prof. Abstract A series of ,5 -cyclopentadienylruthenium complexes, [(,5 -C5MenH5,n)RuCl(cod)] (cod=1,5-cyclooctadiene), are evaluated as catalysts for the cycloaddition of 1,6-diynes with alkynes. As a result, we unexpectedly found that the complex bearing the 1,2,4-Me3Cp ligand is the most efficient catalyst in terms of turnover number (TON) for the cycloaddition of a bulky diiododiyne with acetylene, recording the highest TON of 970 with a catalyst loading of 0.1,mol,%. To obtain insight into this result, we evaluate the electron richness of all complexes by cyclic voltammetric analyses, which indicate that the electron density of the ruthenium center increases with an increase in methyl substitution on the Cp, ligands. The initial rate (up to 10,% conversion) of the cycloaddition was then measured using 1H,NMR spectroscopy. The initial rate is found to decrease as the number of methyl substituents increases. According to these results, we assumed that the optimum catalytic performance exhibited by the 1,2,4-trimethylcyclopentadienyl complex can be attributed to its robustness under the catalytic cycloaddition conditions. The steric and electronic effects of the Cp, ligands are also investigated in terms of the regioselectivity of the cycloaddition of an unsymmetrical diyne and in terms of the chemoselectivity in the cycloaddition of a 1,6-heptadiyne with norbornene. [source] Highly Efficient Biomimetic Oxidation of Sulfide to Sulfone by Hydrogen Peroxide in the Presence of Manganese meso -TetraphenylporphyrinCHINESE JOURNAL OF CHEMISTRY, Issue 6 2008Xian-Tai ZHOU Abstract Low amount of manganese meso -tetraphenyl porphyrin [Mn(TPP)] was used for highly efficient selective oxidation of sulfide to sulfone by hydrogen peroxide at room temperature. Sulfones were produced directly with yields generally around 90% while the catalyst concentration was only 4×10,5 mol·L,1. In a large-scale experiment of thioanisole oxidation, the isolated yield of sulfone (87%) was obtained and the turnover number (TON) reached up to 8×106, which is the highest TON for the oxidation systems of sulfide to sulfone catalyzed by metalloporphyrins. [source] THE EPITHELIAL BRUSH BORDER Na+/H+ EXCHANGER NHE3 ASSOCIATES WITH THE ACTIN CYTOSKELETON BY BINDING TO EZRIN DIRECTLY AND VIA PDZ DOMAIN-CONTAINING Na+/H+ EXCHANGER REGULATORY FACTOR (NHERF) PROTEINSCLINICAL AND EXPERIMENTAL PHARMACOLOGY AND PHYSIOLOGY, Issue 8 2008Boyoung Cha SUMMARY 1The Na+/H+ exchanger NHE3 associates with the actin cytoskeleton by binding ezrin both directly and indirectly. Both types of interaction are necessary for acute regulation of NHE3. Most acute regulation of NHE3 occurs by changes in trafficking via effects on exocytosis and/or endocytosis. However, NHE3 activity can also be regulated without changing the surface expression of NHE3 (change in turnover number). 2A positive amino acid cluster in the a-helical juxtamembrane region in the COOH-terminus of NHE3 (amino acids K516, R520 and R527) is necessary for binding to the protein 4.1, ezrin, radixin, moesin (FERM) domain III of ezrin. Direct binding of NHE3 to ezrin is necessary for many aspects of basal trafficking, including basal exocytosis, delivery from the synthetic pathway and movement of NHE3 in the brush border (BB), which probably contributes to endocytosis over a prolonged period of time. 3In addition, NHE3 binds indirectly to ezrin. The PDZ domain-containing proteins Na+/H+ exchanger regulatory factor (NHERF) 1 and NHERF2, as intermediates in linking NHE3 to ezrin, are necessary for many aspects of NHE3 regulation. The binding of NHERF,ezrin/radixin/moesin to NHE3 occurs in the cytosolic domain of NHE3 between amino acids 475 and 689. This NHERF binding is involved in the formation of the NHE3 complex and restricts NHE3 mobility in the BB. However, it is dynamic; for example, changing in some cases of signalling. Furthermore, NHERF binding is necessary for lysophosphatidic acid stimulation of NHE3 and inhibition of NHE3 by Ca2+, cAMP and cGMP. [source] Synthesis, Crystal Structure, and Catalytic Properties of Novel Dioxidomolybdenum(VI) Complexes with Tridentate Schiff Base Ligands in the Biomimetic and Highly Selective Oxygenation of Alkenes and SulfidesEUROPEAN JOURNAL OF INORGANIC CHEMISTRY, Issue 5 2010Abdolreza Rezaeifard Abstract Four novel dioxidomolybdenum(VI) complexes [MoO2(Lx)(CH3OH)] have been synthesized, using 2[(E)-(2-hydroxy-2-phenylethylimino)methyl]phenol derivatives as tridentate ONO donor Schiff base ligands (H2Lx) and MoO2(acac)2. A monoclinic space group was determined by X-ray crystallography from single-crystal data of a sample of these new complexes. The epoxidation of alkenes by using tert -butyl hydroperoxide and oxidation of sulfides to sulfoxides by urea hydrogen peroxide were efficiently enhanced with excellent selectivity under the catalytic influence these new MoVI complexes. The high efficiency and relative stability of the catalysts have been observed by turnover numbers and UV/Vis investigations. The electron-poor and bulky ligands promoted the effectiveness of the catalysts. [source] Advances towards Highly Active and Stereoselective Simple and Cheap Proline-Based Organocatalysts,EUROPEAN JOURNAL OF ORGANIC CHEMISTRY, Issue 29 2010Francesco Giacalone Abstract Ten 4-acyloxy- L -prolines were screened as catalysts at loadings of 2,0.1 mol-% for the direct asymmetric aldol reaction in water by using variable amounts of water. Among them, a new catalyst, the L -proline carrying a trans -4-(2,2-diphenylacetoxy) group, and a catalyst previously synthesized by us, the L -proline carrying a trans -4-(4-phenylbutanoyloxy) group, were found to be excellent catalysts for the aldol reaction between cyclohexanone or cyclopentanone and substituted benzaldehydes when employed in only 1 and 0.5 mol-%,respectively, at room temperature without additives. For such catalysts, high turnover numbers were obtained, which are among the highest values obtained for enamine organocatalysis. Finally, these catalysts can be synthesized by direct O -acylation from inexpensive molecules and successfully used in scaled-up reactions. [source] Structure,activity relationships of wheat flavone O -methyltransferase , a homodimer of convenienceFEBS JOURNAL, Issue 9 2008Jack A. Kornblatt Wheat flavone O -methyltransferase catalyzes three sequential methylations of the flavone tricetin. Like other flavonoid O -methyltransferases, the protein is a homodimer. We demonstrate, using analytical ultracentrifugation, that perchlorate dissociates the dimer into monomers. The resulting monomers retain all their catalytic capacity, including the ability to catalyze the three successive methylations. We show, using isothermal titration calorimetry, that the binding constant for S -adenosyl- l -methionine does not change significantly as the protein dissociates. The second substrate, tricetin, binds to the dimers but could not be tested with the monomers. CD, UV and fluorescence spectroscopy show that there are substantial changes in the structure of the protein as it dissociates. The fact that there are differences between the monomers and dimers even as the monomers maintain activity may be the result of the very low catalytic capacity of this enzyme. Maximal turnover numbers for the dimers and monomers are only about 6,7 per minute. Even though the binding pockets for S -adenosyl- l -methionine, tricetin, selgin and tricin are intact, selection of a catalytically competent structure may be a very slow step during catalysis. [source] Construction of hybrid peptide synthetases for the production of ,- l -aspartyl- l -phenylalanine, a precursor for the high-intensity sweetener aspartameFEBS JOURNAL, Issue 22 2003Thomas Duerfahrt Microorganisms produce a large number of pharmacologically and biotechnologically important peptides by using nonribosomal peptide synthetases (NRPSs). Due to their modular arrangement and their domain organization NRPSs are particularly suitable for engineering recombinant proteins for the production of novel peptides with interesting properties. In order to compare different strategies of domain assembling and module fusions we focused on the selective construction of a set of peptide synthetases that catalyze the formation of the dipeptide ,- l -aspartyl- l -phenylalanine (Asp-Phe), the precursor of the high-intensity sweetener ,- l -aspartyl- l -phenylalanine methyl ester (aspartame). The de novo design of six different Asp-Phe synthetases was achieved by fusion of Asp and Phe activating modules comprising adenylation, peptidyl carrier protein and condensation domains. Product release was ensured by a C-terminally fused thioesterase domains and quantified by HPLC/MS analysis. Significant differences of enzyme activity caused by the fusion strategies were observed. Two forms of the Asp-Phe dipeptide were detected, the expected ,-Asp-Phe and the by-product ,-Asp-Phe. Dependent on the turnover rates ranging from 0.01,0.7 min,1, the amount of ,-Asp-Phe was between 75 and 100% of overall product, indicating a direct correlation between the turnover numbers and the ratios of ,-Asp-Phe to ,-Asp-Phe. Taken together these results provide useful guidelines for the rational construction of hybrid peptide synthetases. [source] tmRNA from Thermus thermophilusFEBS JOURNAL, Issue 3 2003Interaction with alanyl-tRNA synthetase, elongation factor Tu The interaction of a Thermus thermophilus tmRNA transcript with alanyl-tRNA synthetase and elongation factor Tu has been studied. The synthetic tmRNA was found to be stable up to 70 °C. The thermal optimum of tmRNA alanylation was determined to be around 50 °C. At 50 °C, tmRNA transcript was aminoacylated by alanyl-tRNA synthetase with 5.9 times lower efficiency (kcat/Km) than tRNAAla, primarily because of the difference in turnover numbers (kcat). Studies on EF-Tu protection of Ala,tmRNA against alkaline hydrolysis revealed the existence of at least two different binding sites for EF-Tu on charged tmRNA. The possible nature of these binding sites is discussed. [source] | ||||||||||||||||||||||||||||