Home  About us  Contact
 

Transfer Calculations (transfer + calculation)

Distribution by Scientific Domains
Earth and Environmental Science44%
Engineering33%

Kinds of Transfer Calculations

  • radiative transfer calculation
    		•

    Selected Abstracts

    Effective thermal actions and thermal properties of timber members in natural fires

    FIRE AND MATERIALS, Issue 1 2006
    Jürgen KönigArticle first published online: 28 JUL 200
    Abstract For the thermal analysis of structural or non-structural timber members, using conventional simplified heat transfer models, thermal conductivity values of timber are normally calibrated to test results such that they implicitly take into account influences such as mass transport that are not included in the model. Various researchers and designers have used such effective thermal conductivity values, originally determined for standard fire exposure, to evaluate other fire scenarios such as natural fires. This paper discusses in qualitative terms some parameters that govern the burning of wood and their influence on effective conductivity values. Reviewing fire tests of timber slabs under natural fire conditions, the study explains why effective conductivity values, giving correct results for the ISO 834 standard fire scenario, should not be used in other fire scenarios. For this reason, the thermal properties of timber given in EN 1995-1-2 are limited to standard fire exposure. As shown by heat transfer calculations, the effective thermal conductivity of the char layer is strongly dependent on the charring rate and therefore varies during a natural fire scenario. It has also been shown that char oxidation during the decay phase in a natural fire has a significant influence on the temperature development in the timber member, since char surface temperatures exceed the gas temperature in the compartment or furnace. Using increased effective gas temperature as thermal action during the decay phase, and varying conductivity values for the char layer, fairly good agreement could be obtained regarding the temperature development in the timber member and the char depth. Copyright © 2005 John Wiley & Sons, Ltd. [source]

    A parallel Galerkin boundary element method for surface radiation and mixed heat transfer calculations in complex 3-D geometries

    INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, Issue 12 2004
    X. Cui
    Abstract This paper presents a parallel Galerkin boundary element method for the solution of surface radiation exchange problems and its coupling with the finite element method for mixed mode heat transfer computations in general 3-D geometries. The computational algorithm for surface radiation calculations is enhanced with the implementation of ideas used for 3-D computer graphics applications and with data structure management involving creating and updating various element lists optimized for numerical performance. The algorithm for detecting the internal third party blockages of thermal rays is presented, which involves a four-step procedure, i.e. the primary clip, secondary clip and adaptive integration with checking. Case studies of surface radiation and mixed heat transfer in both simple and complex 3-D geometric configurations are presented. It is found that a majority of computational time is spent on the detection of foreign element blockages and parallel computing is ideally suited for surface radiation calculations. Results show that the decrease of the CPU time approaches asymptotically to an inverse rule for parallel computing of surface radiation exchanges. For large-scale computations involving complex 3-D geometries, an iterative procedure is a preferred approach for the coupling of the Galerkin boundary and finite elements for mixed mode heat transfer calculations. Copyright © 2004 John Wiley & Sons, Ltd. [source]

    A feasibility study of daytime fog and low stratus detection with TERRA/AQUA-MODIS over land

    METEOROLOGICAL APPLICATIONS, Issue 2 2006
    Jörg Bendix
    Abstract A scheme for the detection of fog and low stratus over land during daytime based on data of the MODIS (Moderate Resolution Imaging Spectroradiometer) instrument is presented. The method is based on an initial threshold test procedure in the MODIS solar bands 1,7 (0.62,2.155µm). Fog and low stratus detection generally relies on the definition of minimum and maximum fog and low stratus properties, which are converted to spectral thresholds by means of radiative transfer calculations (RTC). Extended sensitivity studies reveal that thresholds mainly depend on the solar zenith angle and, hence, illumination-dependent threshold functions are developed. Areas covered by snow, ice and mid-/high-level clouds as well as bright/hazy land surfaces are omitted from the initial classification result by means of a subsequent cloud-top height test based on MODIS IR band 31 (at 12 µm) and a NIR/VIS ratio test. The validation of the final fog and low stratus mask generally shows a satisfactory performance of the scheme. Validation problems occur due to the late overpass time of the TERRA platform and the time lag between SYNOP and satellite observations. Apparent misclassifications are mainly found at the edge of the fog layers, probably due to over- or underestimation of fog and low stratus cover in the transition zone from fog to haze. Copyright © 2006 Royal Meteorological Society. [source]

    A self-consistent scattering model for cirrus.

    THE QUARTERLY JOURNAL OF THE ROYAL METEOROLOGICAL SOCIETY, Issue 629 2007
    I: The solar region
    Abstract In this paper a self-consistent scattering model for cirrus is presented. The model consists of an ensemble of ice crystals where the smallest ice crystal is represented by a single hexagonal ice column. As the overall ice crystal size increases, the ice crystals become progressively more complex by arbitrarily attaching other hexagonal elements until a chain-like ice crystal is formed, this representing the largest ice crystal in the ensemble. The ensemble consists of six ice crystal members whose aspect ratios (ratios of the major-to-minor axes of the circumscribed ellipse) are allowed to vary between unity and 1.84 for the smallest and largest ice crystal, respectively. The ensemble model's prediction of parameters fundamental to solar radiative transfer through cirrus such as ice water content and the volume extinction coefficient is tested using in situ based data obtained from the midlatitudes and Tropics. It is found that the ensemble model is able to generally predict the ice water content and extinction measurements within a factor of two. Moreover, the ensemble model's prediction of cirrus spherical albedo and polarized reflection are tested against a space-based instrument using one day of global measurements. The space-based instrument is able to sample the scattering phase function between the scattering angles of approximately 60° and 180° , and a total of 37 581 satellite pixels were used in the present analysis covering latitude bands between 43.75°S and 76.58°N. It is found that the ensemble model phase function is well able to minimize significantly differences between satellite-based measurements of spherical albedo and the ensemble model's prediction of spherical albedo. The satellite-based measurements of polarized reflection are found to be reasonably described by more simple members of the ensemble. The ensemble model presented in this paper should find wide applicability to the remote sensing of cirrus as well as more fundamental solar radiative transfer calculations through cirrus, and improved solar optical properties for climate and Numerical Weather Prediction models. Copyright © 2007 Royal Meteorological Society [source]

    Reproducing cloud microphysical and irradiance measurements using three 3D cloud generators

    THE QUARTERLY JOURNAL OF THE ROYAL METEOROLOGICAL SOCIETY, Issue 624 2007
    K. Sebastian Schmidt
    Abstract Using three cloud generators, three-dimensional (3D) cloud fields are reproduced from microphysical cloud data measured in situ by aircraft. The generated cloud fields are used as input to a 3D radiative transfer model to calculate the corresponding fields of downward and upward irradiance, which are then compared with airborne and ground-based radiation measurements. One overcast stratocumulus scene and one broken cumulus scene were selected from the European INSPECTRO field experiment, which was held in Norwich, UK, in September 2002. With these data, the characteristics of the three different cloud reproduction techniques are assessed. Besides vertical profiles and histograms of measured and modelled liquid water content and irradiance, the horizontal structure of these quantities is examined in terms of power spectra and autocorrelation lengths. 3D radiative transfer calculations are compared with the independent pixel approximation, and their differences with respect to domain-averaged quantities and 3D fields are interpreted. Copyright © 2007 Royal Meteorological Society [source]

    On the observation of traveling acoustic waves in the solar atmosphere using a magneto-optical filter

    ASTRONOMISCHE NACHRICHTEN, Issue 3-4 2007
    M. Haberreiter
    Abstract In contrast to low-frequency waves that are trapped in the cavity of the Sun, high-frequency waves can travel freely in the solar atmosphere. By modelling the observed intensity signal in the red and blue wings of K I 7699 Å and Na I 5890 Å, we aim to better understand the measurements carried out with the Magneto-Optical Filter at Two Heights (MOTH) experiment. We model the observed intensity signal with radiative transfer calculations carried out with the COde for Solar Irradiance (COSI). Furthermore, we derive the formation height of the lines in order to analyze to what extent the contribution functions are modulated by the acoustic waves. We find a phase lag between the red and blue filter for acoustic waves with a frequency above ,7 mHz and conclude that a frequency dependent data analysis is required for higher frequencies. (© 2007 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [source]

    A new IR technique for monitoring low cloud properties using geostationary satellite data

    ATMOSPHERIC SCIENCE LETTERS, Issue 2 2009
    Qingyuan Han
    Abstract A new technique of using satellite infrared radiance data for retrieving cloud properties is developed and applied to SEVIRI data, which is based on direct radiative transfer calculations, not on the emissivity approximation as used by other satellite IR only techniques. Instantaneous atmospheric profiles are used in the new technique for improving the accuracy of retrievals. Comparison of the retrieved results with coincident observations of CloudSat and CALIPSO shows excellent agreement for low clouds. This study shows that, using only IR radiances, the single layer assumption would significantly underestimate cloud optical depth when multilayered cloud system is presented. Copyright © 2009 Royal Meteorological Society [source]

    Binding of bioactive phytochemical piperine with human serum albumin: A spectrofluorometric study

    BIOPOLYMERS, Issue 4 2007
    Dodda Venkatanna Suresh
    Abstract Piperine, the bioactive alkaloid compound of the spice black pepper (Piper nigrum) exhibits a wide range of beneficial physiological and pharmacological activities. Being essentially water-insoluble, piperine is presumed to be assisted by serum albumin for its transport in blood. In this study, the binding of piperine to serum albumin was examined by employing steady state and time resolved fluorescence techniques. Binding constant for the interaction of piperine with human serum albumin, which was invariant with temperature in the range of 17,47°C, was found to be 0.5 × 105M,1, having stoichiometry of 1:1. At 27°C, the van't Hoff enthalpy ,H° was zero; ,S° and ,G° were found to be 21.4 cal mol,1 K,1 and ,6.42 kcal mol,1. The binding constant increased with the increase of ionic strength from 0.1 to 1.0M of sodium chloride. The decrease of Stern,Volmer constant with increase of temperature suggested that the fluorescence quenching is static. Piperine fluorescence showed a blue shift upon binding to serum albumin, which reverted with the addition of ligands ,triiodobenzoic acid and hemin. The distance between piperine and tryptophan after binding was found to be 2.79 nm by Förster type resonance energy transfer calculations. The steady state and time resolved fluorescence measurements suggest the binding of piperine to the subdomain IB of serum albumin. These observations are significant in understanding the transport of piperine in blood under physiological conditions. © 2007 Wiley Periodicals, Inc. Biopolymers 86: 265,275, 2007. This article was originally published online as an accepted preprint. The "Published Online" date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com [source]