Home About us Contact
|
Home About us Contact | ||
|
|
||
Titania Nanoparticles (titania + nanoparticle)
Selected AbstractsCompact Inverse-Opal Electrode Using Non-Aggregated TiO2 Nanoparticles for Dye-Sensitized Solar CellsADVANCED FUNCTIONAL MATERIALS, Issue 7 2009Eun Sik Kwak Abstract Compact inverse-opal structures are constructed using non-aggregated TiO2 nanoparticles in a three-dimensional colloidal array template as the photoelectrode of a dye-sensitized solar cell. Organic-layer-coated titania nanoparticles show an enhanced infiltration and a compact packing within the 3D array. Subsequent thermal decomposition to remove the organic template followed by impregnation with N-719 dye results in excellent inverse-opal photoelectrodes with a photo-conversion efficiency as high as 3.47% under air mass 1.5 illumination. This colloidal-template approach using non-aggregated nanoparticles provides a simple and versatile way to produce efficient inverse-opal structures with the ability to control parameters such as cavity diameter and film thickness. [source] Nanoparticle Coating for Advanced Optical, Mechanical and Rheological Properties,ADVANCED FUNCTIONAL MATERIALS, Issue 16 2007F. Hakim Abstract Primary titania nanoparticles were coated with ultrathin alumina films using Atomic Layer Deposition (ALD). The deposited films were highly uniform and conformal with an average growth rate of 0.2,nm per coating cycle. The alumina films eliminated the surface photocatalytic activity of titania nanoparticles, while maintained their original extinction efficiency of ultraviolet light. Deposited films provided a physical barrier that effectively prevented the titania surface from oxidizing organic material whereas conserving its bulk optical properties. Parts fabricated from coated powders by pressureless sintering had a 13,% increase in surface hardness over parts similarly fabricated from uncoated particles. Owing to its homogeneous distribution, the secondary alumina phase suppressed excessive grain growth. Alumina films completely reacted during sintering to form aluminum titanate composites, as verified by XRD. Coated particles showed a pseudoplastic behavior at low shear rates due to modified colloidal forces. This behavior became similar to the Newtonian flow of uncoated nanoparticle slurries as the shear rate increased. Suspensions of coated particles also showed a decreased viscosity relative to the viscosity of uncoated particle suspensions. [source] Nanocoating hybrid polymer films on large quantities of cohesive nanoparticles by molecular layer depositionAICHE JOURNAL, Issue 4 2009Xinhua Liang Abstract The conformal coating of ultra-thin aluminum alkoxide (alucone) polymer films on primary silica and titania nanoparticles using molecular layer deposition (MLD) in a fluidized bed reactor from 100 to 160 °C is described. In situ mass spectrometry revealed that the growth of alucone MLD films was self-limiting as a function of the individual trimethylaluminum and ethylene glycol exposures. The composition and highly conformal alucone films throughout the surface of both silica and titania nanoparticles were confirmed. The highest growth rate was observed at the lowest sample temperature. Primary nanoparticles were coated individually despite their strong tendency to aggregate during fluidization. Based on the results of chemical and thermogravimetric analysis, the value of x in the formula of Al(OCH2CH2O)x was estimated to be 1.9. The calculated film density slightly increased from 2.0 ± 0.1 to 2.2 ± 0.1 g/cm3 with the increasing of temperature from 100 to 160 °C. © 2009 American Institute of Chemical Engineers AIChE J, 2009 [source] Effect of an anionic monomer on the pickering emulsion polymerization stabilized by titania hydrosolJOURNAL OF POLYMER SCIENCE (IN TWO SECTIONS), Issue 21 2009Xiaomei Song Abstract Polystyrene (PS) nanocomposite particles with high titania content are prepared by Pickering emulsion polymerization. A self-made titania hydrosol modified by an anionic monomer sodium styrene sulfonate (NaSS) is used as a stabilizer and photocatalyst. The stability of the emulsion system is greatly improved by the electrostatic interaction between negatively charged NaSS and positively charged titania nanoparticles. The nanocomposite spheres with the diameter of around 120 nm are highly charged, indicating titania-rich surfaces of latex particles. It is also proven by the field-emission transmission electron microscope and field-emission scanning electron microscope images. The well-defined core-shell structure of the obtained PS/titania composite particles is confirmed by the formation of fragile hollow titania nanospheres after thermogravimetric analysis tests. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5728,5736, 2009 [source] Dye-Sensitized Solar Cells Based on TiO2 Coatings with Dual Size-Scale PorosityJOURNAL OF THE AMERICAN CERAMIC SOCIETY, Issue 9 2009Lai Qi Dye-sensitized solar cells (DSSC) with efficiencies greater than 4% were produced with templated "inverse opal" titania coatings. A novel one-step method produces uniform and crack-free coatings made using commercially available titania nanoparticles with high reproducibility and uniformity. In this research, a volatile solvent electrolyte was tested; however, it shows proof-of-concept that larger pore volumes can be created for increased penetration of more viscous electrolytes that can be utilized in high-efficiency cells. This dual size-scale porosity film is a promising structure for DSSC applications, especially for those solid-state or quasi-solid-state cells that require polymer electrolytes. [source] Photocatalytic Coatings for Environmental Applications,PHOTOCHEMISTRY & PHOTOBIOLOGY, Issue 2 2005Norman S. Allen ABSTRACT A series of nano- and micronparticle-grade anatase and rutile titanium dioxide pigments have been prepared with various densities of surface treatments, particle size and surface area. Their photocatalytic activities have been determined in a series of paint films by FTIR, chalking, color, gloss change and weight loss after artificial weathering. The pigments have also been examined by rapid assessment methodologies using photodielectric microwave spectroscopy, 2-propanol oxidation and hydroxyl analysis. The microwave response under light and dark cycles provides an extended timescale probe of chargecarrier dynamics in the pigments. Pigment particle size, surface area and properties clearly play an important role in dispersion and any polymer-pigment interactions. Photooxidation studies on several types of paint films show a clear demarcation between nanoparticle- and pigmentary-grade titanium dioxide, with the former being more active because of their greater degree of catalytic surface activity. The photosensitivity of titanium dioxide is considered to arise from localized sites on the crystal surface (i.e. acidic OH), and occupation of these sites by surface treatments inhibits photoreduction of the pigment by ultraviolet radiation; hence, the destructive oxidation of the binder is inhibited. Coatings containing 2,5% by weight alumina or alumina and silica are satisfactory for generalpurpose paints. If greater resistance to weathering is desired, the pigments are coated more heavily to about 7,10% weight. The coating can consist of a combination of several materials, e.g. alumina, silica, zirconia, aluminum phosphates of other metals. For example, the presence of hydrous alumina particles lowers van der Waals forces between pigments particles by several orders of magnitude, decreasing particle-particle attractions. Hydrous aluminum oxide phases appear to improve dispersibility more effectively than most of the other hydroxides and oxides. Coated nanoparticles are shown to exhibit effective light stabilization in various water- and oilbased paint media in comparison with conventional organic stabilizers. Hindered piperidine stabilizers are shown to provide no additional benefits in this regard, often exhibiting strong antagonism. The use of photocatalytic titania nanoparticles in the development of self-cleaning paints and microbiological surfaces is also demonstrated in this study. In the former case, surface erosion is shown to be controlled by varying the ratio of admixture of durable pigmentary-grade rutile (heavily coated) and a catalytic-grade anatase nanoparticle. For environmental applications in the development of coatings for destroying atmospheric pollutants such as nitrogen oxide gases (NOX), stable substrates are developed with photocatalytic nanoparticle-grade anatase. In this study, porosity of the coatings through calcium carbonate doping is shown to be crucial in the control of the effective destruction of atmospheric NOx gases. For the development of microbiological substrates for the destruction of harmful bacteria, effective nanoparticle anatase titania is shown to be important, with hydrated high surface area particles giving the greatest activity. [source] Stabilized dispersions of titania nanoparticles via a sol,gel process and applications in UV-curable hybrid systemsPOLYMER INTERNATIONAL, Issue 4 2006Xiahong Zhang Abstract Organic,inorganic hybrid UV-curable coatings were synthesized through blending UV-curable components and stabilized titania sol prepared via a sol,gel process of tetrabutyl titanate (TBT) with three different stabilizers, acetylacetone (Acac), isopropyl tri(dioctyl)pyrophosphato titanate coupling agent (TTPO) and a polymerizable organic phosphoric acid (MAP). The size and the dispersion of titania particle in the UV-cured organic matrix were dominated by the properties of these stabilizers. A cured hybrid film with titania particle size around 20 nm was obtained when TTPO was utilized as protection agent for the sol. It is interesting that the hardness and flexibility of the photocured hybrid films were improved simultaneously, in contrast to results with neat organic UV-curable formulations. Copyright © 2006 Society of Chemical Industry [source] Preparation and Evaluation of a Novel Cellulose Tris(N-3,5-dimethylphenylcarbamate) Chiral Stationary PhaseCHINESE JOURNAL OF CHEMISTRY, Issue 1 2008Jin GE Abstract A novel cellulose tris(N -3,5-dimethylphenylcarbamate) (CDMPC) chiral stationary phase (CSP) was prepared by coating CDMPC on TiO2/SiO2, which was prepared by coating titania nanoparticles on silica through a self-assemble technique. At first, 2-hydroxyl-phenyl acetonitrile and , -phenylethanol were separated on this new CSP to evaluate the chiral separation ability. Then, two pesticides, matalaxyl and diclofop-methyl were separated. The influence of the mobile phase composition on the enantioselectivity was discussed, and the repeatability and stability of the CSP were studied too. [source] | |||||||||||||