Home About us Contact
|
Home About us Contact | ||
|
|
||
Basic Functional Groups (basic + functional_groups)
Selected AbstractsElectrophoretic behaviors of human hepatoma HepG2 cellsELECTROPHORESIS, Issue 9 2009Jyh-Ping Hsu Abstract The electrophoretic mobility of HepG2 cells was measured and a charge-regulated model was proposed to simulate the results obtained. Here, a cell was simulated by a rigid core and an ion-penetrable membrane layer containing both acidic and basic functional groups. The influences of the key parameters, including the pH, the ionic strength, the thickness of the membrane layer of a cell, the density and the dissociation constant of the dissociable functional groups in the membrane layer, and the binding constant of divalent cations on the electrophoretic mobility of a cell were investigated. In particular, the role of the buffer used in the experiment was discussed; this effect was neglected in almost all the relevant theoretical analyses in the literature. We showed that the binding ability of divalent cations to the dissociated functional groups in the membrane layer of a cell ranks as Ca2+>Mg2+>hexamethonium. [source] Electrophoresis of a charge-regulated toroid normal to a large diskELECTROPHORESIS, Issue 2 2008Jyh-Ping Hsu Abstract The electrophoresis of a charge-regulated toroid (doughnut-shaped entity) normal to a large disk is investigated under the conditions of low surface potential and weak applied electric field. The system considered is capable of modeling the electrophoretic behavior of various types of biocolloids such as bacterial DNA, plasmid DNA, and anabaenopsis near a perfectly conducting planar wall. The influences of the size of the toroid, the separation distance between the toroid and the disk, the charged conditions on the surfaces of the toroid and the disk, and the thickness of electric double layer on the electrophoretic mobility of the toroid are discussed. The results of numerical simulation reveal that under typical conditions the electrophoretic behavior of the toroid can be different from that of an integrated entity. For instance, if the surface of the toroid carries both acidic and basic functional groups, its mobility may have a local maximum as the thickness of double layer varies. We show that the electrophoretic behavior of the toroid is different, both qualitatively and quantitatively, from that of the corresponding integrated particle (particle without hole). [source] Tuning the Thermal Relaxation of a Photochromic Dye in Functionalized Mesoporous SilicaADVANCED FUNCTIONAL MATERIALS, Issue 13 2009Lea A. Mühlstein Abstract In this study, it is shown that the kinetics of the back-switching reaction of a photochromic spirooxazine dye encapsulated in mesoporous silica materials can be significantly influenced both by the space available to the dye molecules and by the functionalization of the silica wall. Steric hindrance of the ring-closing process due to high dye content or small pore size leads to a slow fading speed of the irradiated dye species. Further, the density of surface silanol-groups present at the silica walls has an effect on the switching behavior of the dye because of their ability to stabilize the zwitterionic merocyanine isomers, thereby slowing the fading process from the open to the closed form. This stabilization effect is further enhanced in the presence of acidic functional groups, while, in contrast, basic functional groups reduce the stabilization of the open-from dye isomers, and thus a faster decay of the irradiated species is observed. Control over the fading speed of photochromic dyes is interesting for applications requiring a particularly fast or slow fading speed. [source] Efficient Heterogeneous Dual Catalyst Systems for Alkane MetathesisADVANCED SYNTHESIS & CATALYSIS (PREVIOUSLY: JOURNAL FUER PRAKTISCHE CHEMIE), Issue 1 2010Zheng Huang Abstract A fully heterogeneous and highly efficient dual catalyst system for alkane metathesis (AM) has been developed. The system is comprised of an alumina-supported iridium pincer catalyst for alkane dehydrogenation/olefin hydrogenation and a second heterogeneous olefin metathesis catalyst. The iridium catalysts bear basic functional groups on the aromatic backbone of the pincer ligand and are strongly adsorbed on Lewis acid sites on alumina. The heterogeneous systems exhibit higher lifetimes and productivities relative to the corresponding homogeneous systems as catalyst/catalyst interactions and bimolecular decomposition reactions are inhibited. Additionally, using a "two-pot" device, the supported Ir catalysts and metathesis catalysts can be physically separated and run at different temperatures. This system with isolated catalysts shows very high turnover numbers and is selective for the formation of high molecular weight alkanes. [source] Highly Active and Recyclable Heterogeneous Iridium Pincer Catalysts for Transfer Dehydrogenation of AlkanesADVANCED SYNTHESIS & CATALYSIS (PREVIOUSLY: JOURNAL FUER PRAKTISCHE CHEMIE), Issue 1-2 2009Zheng Huang Abstract Pincer-ligated iridium complexes have proven to be highly effective catalysts for the dehydrogenation and transfer-dehydrogenation of alkanes. Immobilization onto a solid support offers significant potential advantages in the application of such catalysts particularly with respect to catalyst separation and recycling. We describe three approaches toward such immobilization: (i) covalent attachment to a Merrifield resin, (ii) covalent bonding to silica via a pendant alkoxysilane group, and (iii) adsorption on ,-alumina (,-Al2O3), through basic functional groups on the para- position of the pincer ligand. The simplest of these approaches, adsorption on ,-Al2O3, is also found to be the most effective, yielding catalysts that are robust, recyclable, and comparable to or even more active than the corresponding species in solution. Spectroscopic evidence (NMR, IR) and studies of catalytic activity support the hypothesis that binding occurs at the para- substituent and that this has only a relatively subtle and indirect influence on catalytic behavior. [source] Peak shape improvement of basic analytes in capillary liquid chromatographyJOURNAL OF SEPARATION SCIENCE, JSS, Issue 3 2005Anja Prüß Abstract The analysis of bases is of special interest in pharmaceutical research because numerous active substances contain basic functional groups. Capillary and conventional size LC separations of drug substances spiked with potential impurities were compared. In the case of the nonpolar drug levonorgestrel equal separation efficiency was readily attained by both techniques. The peaks of basic substances, however, showed extensive tailing when separated by capillary LC. The peak deformation was attributable to interactions of the basic substances with the polar inner surface of the fused silica capillaries employed in capillary LC and does not appear with the steel tubing generally used in conventional size LC. This drawback of capillary LC was overcome by use of deactivated fused silica capillaries for column hardware and transfer lines. [source] Insulin transport across porous charged membranes: Effect of the electrostatic interactionBIOTECHNOLOGY PROGRESS, Issue 5 2009Shaoling Zhang Abstract Insulin transport phenomena across a series of porous charged membranes were studied at two pH conditions (pH 3.3 and pH 7.4) in this article. The membranes were prepared by pore-surface modification of porous poly(acrylonitrile) (PAN) membranes by grafting with weak acidic and basic functional groups. The insulin partition coefficient K between the membrane and solution was estimated from the equilibrium adsorption amount in the batch adsorption experiment. The insulin effective diffusion coefficient D inside the membrane was determined as a fitting parameter by matching the diffusion model with the experimental data of the diffusion measurement. Both K and D correlated well with the charge properties of the insulin and membrane: when the insulin and membrane carried opposite net charge, the partition coefficient showed relatively larger values, while the effective diffusion coefficient was reduced. The insulin permeability coefficient P obtained from the experimental results agreed with that estimated from the partition coefficient and effective diffusion coefficient. These results suggested that the combined effects of the solubility and diffusivity on the permeability coefficient complicated the relationship between the permeability and the charge properties of the insulin and membrane. Additionally, our calculation supported that insulin permeability was reduced by the boundary layer between the membrane and solution. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009 [source] Insulin adsorption into porous charged membranes: Effect of the electrostatic interactionBIOTECHNOLOGY PROGRESS, Issue 4 2009Shaoling Zhang Abstract Insulin adsorption into a series of porous charged membranes was investigated by batch adsorption experiments, and the experimental results were analyzed by the homogeneous diffusion model. The membranes used in this study were prepared by pore-surface modification of porous poly(acrylonitrile) (PAN) membranes by grafting with weak acidic and basic functional groups. The amount of insulin adsorbed into the membrane was determined from the material balance of insulin. The insulin partition coefficient K between the membrane and solution was estimated from the equilibrium adsorption amount, and the effective diffusion coefficient D was estimated by matching the model with the experimental data as a fitting parameter. The dependence of K and D on the charge properties of the insulin and membrane is observed and discussed. The partition coefficient K increased when the insulin and the membrane carried opposite charges, on the other hand, the effective diffusion coefficient D was reduced. These results indicate that the electrostatic interaction between the insulin and the membranes played an important role in the insulin adsorption. © 2009 American Institute of Chemical Engineers Biotechnol. Prog. 2009 [source] | |||||||||||||