Home About us Contact
|
Home About us Contact | ||
|
|
||
Sol Solution (sol + solution)
Selected AbstractsElectrochemically-Induced Deposition of Amine-Functionalized Silica Films on Gold Electrodes and Application to Cu(II) Detection in (Hydro)Alcoholic MediumELECTROANALYSIS, Issue 19 2005Alain Walcarius Abstract Well-adherent amine-functionalized porous silica films have been deposited on gold electrodes by combining the self-assembly technology, the sol,gel process, and the electrochemical modulation of pH at the electrode/solution interface. A partial self-assembled monolayer of mercaptopropyl-trimethoxysilane (MPTMS) was first formed on disposable gold electrodes from recordable CDs (Au-CDtrodes). The so pretreated MPTMS-Au-CDtrodes were immersed in a stable sol solution (pH,3) containing (3-aminopropyl)-triethoxysilane (APTES) and tetraethoxysilane (TEOS). Polycondensation of the APTES and TEOS precursors was then achieved by applying a negative potential for a given period of time to generate a local pH increase at the electrode/solution interface and promote the deposition of the amine functionalized silica film adhering well to the electrode surface owing to the MPTMS monolayer acting somewhat as a "molecular glue". Various parameters affecting the electrodeposition process have been studied and the film permeability to redox probes in solution was characterized by cyclic voltammetry. The amine-functionalized silica film electrodes were then applied to the preconcentration of copper(II) species prior to their electrochemical detection by anodic stripping differential pulse voltammetry. Getting high sensitivity has however required the application of an electrochemical pre-activation step as the majority of the organo-functional groups were in the form of ammonium moieties (because the film was prepared from an acidic sol). This was achieved by applying a sufficiently negative potential to the electrode surface to reduce protons and increase consequently the amine-to-ammonium ratio within the film and, thus, the efficiency of the precocentration process. The resulting device was then optimized for copper(II) determination in hydroalcoholic medium, giving rise to a linear response in the 0.1,10,,M concentration range. [source] Advances in sol-gel based columns for capillary electrochromatography: Sol-gel open-tubular columnsELECTROPHORESIS, Issue 22-23 2002Abdul Malik Abstract The development of sol-gel open-tubular column technology in capillary electrochromatography (CEC) is reviewed. Sol-gel column technology offers a versatile means of creating organic-inorganic hybrid stationary phases. Sol-gel column technology provides a general approach to column fabrication for microseparation techniques including CEC, and is amenable to both open-tubular and monolithic columns. Direct chemical bonding of the stationary phase to the capillary inner walls provides enhanced thermal and solvent stability to sol-gel columns. Sol-gel stationary phases inherently possess higher surface area, and thus provide an effective one-step alternative to conventional open-tubular column technology. Sol-gel column technology is applicable to both silica-based and transition metal oxide-based hybrid stationary phases, and thus, provides a great opportunity to utilize advanced material properties of a wide range of nontraditional stationary phases to achieve enhanced selectivity in analytical microseparations. A wide variety of stationary phase ligands can be chemically immobilized on the capillary inner surface using a single-step sol-gel procedure. Sol-gel chemistry can be applied to design stationary phases with desired chromatographic characteristics, including the possibility of creating columns with either a positive or a negative charge on the stationary phase surface. This provides a new tool to control electroosmotic flow (EOF) in the column. Column efficiencies on the order of half a million theoretical plates per meter have been reported for sol-gel open-tubular CEC columns. The selectivity of sol-gel stationary phases can be easily fine-tuned by adjusting the composition of the coating sol solution. Open-tubular columns have significant advantages over their packed counterparts because of the simplicity in column making and hassle-free fritless operation. Open-tubular CEC columns possess low sample capacity and low detection sensitivity. Full utilization of the analytical potential of sol-gel open-tubular columns will require a concomitant development in the area of high-sensitivity detection technology. [source] Preparation and Characterization of a Large-Scale YBa2Cu3O7,x Superconductor Prepared by Plastic Forming without a High-Pressure Molding: Effect of Polyvinyl Alcohol (PVA) Addition on the Superconducting PropertiesJOURNAL OF THE AMERICAN CERAMIC SOCIETY, Issue 3 2009Makoto Takahashi The preparation of large-scale YBa2Cu3O7,x superconductor samples was investigated. This method is based on plastic forming using a slurry consisting of YBa2Cu3O7,x particles and a sol solution made up of multimetallic hydroxide particles (YBa2Cu3(OH)x colloidal particles) and poly(vinyl) alcohol (PVA). The effects of adding PVA on the product, the crystallinity, and the superconducting properties of the sample were investigated. It was found that PVA acted as a protective colloid in the sol solution and stabilized YBa2Cu3(OH)x colloidal particles, and that the role of PVA changed from a thickener to a flocculant during drying so that the formability/workability of the green sheet sample was improved and large samples (about 80 mm × 80 mm × 3 mm) without large cracks were obtained after firing. The samples became superconducting at 91.5±0.5 K (Tcon) and the full transition temperature (Tcoff) was 88.5±1.5 K. The critical current density (Jc) of the sample prepared from the slurry containing 1 wt% PVA was 713±150 A/cm2 at 77 K. This Jc value was improved to 2300 A/cm2 by heat treatment at 773 K under an oxygen atmosphere. [source] Protein crystallization in hydrogel beadsACTA CRYSTALLOGRAPHICA SECTION D, Issue 9 2005Ronnie Willaert The use of hydrogel beads for the crystallization of proteins is explored in this contribution. The dynamic behaviour of the internal precipitant, protein concentration and relative supersaturation in a gel bead upon submerging the bead in a precipitant solution is characterized theoretically using a transient diffusion model. Agarose and calcium alginate beads have been used for the crystallization of a low-molecular-weight (14.4,kDa, hen egg-white lysozyme) and a high-molecular-weight (636.0,kDa, alcohol oxidase) protein. Entrapment of the protein in the agarose-gel matrix was accomplished using two methods. In the first method, a protein solution is mixed with the agarose sol solution. Gel beads are produced by immersing drops of the protein,agarose sol mixture in a cold paraffin solution. In the second method (which was used to produce calcium alginate and agarose beads), empty gel beads are first produced and subsequently filled with protein by diffusion from a bulk solution into the bead. This latter method has the advantage that a supplementary purification step is introduced (for protein aggregates and large impurities) owing to the diffusion process in the gel matrix. Increasing the precipitant, gel concentration and protein loading resulted in a larger number of crystals of smaller size. Consequently, agarose as well as alginate gels act as nucleation promoters. The supersaturation in a gel bead can be dynamically controlled by changing the precipitant and/or the protein concentration in the bulk solution. Manipulation of the supersaturation allowed the nucleation rate to be varied and led to the production of large crystals which were homogeneously distributed in the gel bead. [source] Thermal and rheological properties of poly(vinyl alcohol) and water-soluble chitosan hydrogels prepared by a combination of ,-ray irradiation and freeze thawingJOURNAL OF APPLIED POLYMER SCIENCE, Issue 6 2008Xiaomin Yang Abstract Poly(vinyl alcohol) (PVA)/water-soluble chitosan (ws-chitosan) hydrogels were prepared by a combination of ,-irradiation and freeze thawing. The thermal and rheological properties of these hydrogels were compared with those of hydrogels prepared by pure irradiation and pure freeze thawing. Irradiation reduced the crystallinity of PVA, whereas freeze thawing increased it. Hydrogels made by freeze thawing followed by irradiation had higher degrees of crystallinity and higher melting temperatures than those made by irradiation followed by freeze thawing. ws-Chitosan disrupted the ordered association of PVA molecules and decreased the thermal stability of both physical blends and hydrogels. All the hydrogels showed shear-thinning behavior in the frequency range of 0.2,100 rad/s. Hydrogels made by freeze thawing dissolved into sol solutions at about 80°C, whereas those made by irradiation showed no temperature dependence up to 100°C. The chemical crosslinking density of the hydrogels made by irradiation followed by freeze thawing was much greater than that of hydrogels made by freeze thawing followed by irradiation. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008 [source] | |||||||||||||