Home About us Contact
|
Home About us Contact | ||
|
|
||
Sensor Chip (sensor + chip)
Selected AbstractsA Metal-Chelating Piezoelectric Sensor Chip for Direct Detection and Oriented Immobilization of PolyHis-Tagged ProteinsBIOTECHNOLOGY PROGRESS, Issue 4 2004Hsiu-Mei Chen A metal-chelating piezoelectric (PZ) chip for direct detection and controlled immobilization of polyHis-tagged proteins has been demonstrated. The chip was prepared by covalently binding a hydrogel matrix complex of oxidized dextran and nitrilotriacetic acid (NTA) ligand onto an activated alkanethiol-modified PZ crystal. The resulting chip effectively captured Ni2+ ions onto its NTA surface, as disclosed by the resonant frequency shift of the crystal and an X-ray photoelectron spectroscopy analysis. The real-time frequency analysis revealed that the bare NTA chip was nonfouling, regenerable, and highly reusable during continuous repetitive injections of ion solutions and binding proteins. In addition, the chip displayed good long-term reusability and storage stability. The individual binding studies of a polyHis-tagged glutathione- S -transferase and its native untagged form on various metal-charged chips revealed that Co2+, Cu2+, and Ni2+ ions each had different immobilization ability on the NTA surface, as well as their binding ability and selectivity with the tagged protein. As a result, the tagged protein immobilized on the Ni2+ -charged chip can actively be bound with its antibody and substrate. Further, the quantitative analyses of the tagged protein in crude cell lysate with a single Ni2+ -charged chip and of its substrate with a protein-coated chip were also successfully demonstrated. Therefore, this study initiates the possibilities of oriented, reversible, and universal immobilization of any polyHis-tagged protein and its functional study using a real-time PZ biosensor. [source] Design and use of multi-affinity surfaces in biomolecular interaction analysis,mass spectrometry (BIA/MS): a step toward the design of SPR/MS arraysJOURNAL OF MOLECULAR RECOGNITION, Issue 1 2003Dobrin Nedelkov Abstract The feasibility of multi-affinity ligand surfaces in biomolecular interaction analysis,mass spectrometry (BIA/MS) was explored in this work. Multi-protein affinity surfaces were constructed by utilizing antibodies to beta-2-microglobulin, cystatin C, retinol binding protein, transthyretin, serum amyloid P and C-reactive protein. In the initial experiments, all six antibodies were immobilized on a single site (flow cell) on the sensor chip surface, followed by verification of the surface activity via separate injections of purified proteins. After an injection of diluted human plasma aliquot over the antibodies-derivatized surfaces, and subsequent MALDI-TOF MS analysis, signals representing five out of the six targeted proteins were observed in the mass spectra. Further, to avoid the complexity of the spectra, the six proteins were divided into two groups (according to their molecular weight) and immobilized on two separate surfaces on a single sensor chip, followed by an injection of human plasma aliquot. The resulting mass spectra showed signals from all proteins. Also, the convolution resulting from the multiply charged ion species was eliminated. The ability to create such multi-affinity surfaces indicates that smaller-size ligand areas/spots can be employed in the BIA/MS protein interaction screening experiments, and opens up the possibilities for construction of novel multi-arrayed SPR-MS platforms and methods for high-throughput parallel protein interaction investigations. Copyright © 2003 John Wiley & Sons, Ltd. [source] Aerobic batch cultivation in micro bioreactor with integrated electrochemical sensor arrayBIOTECHNOLOGY PROGRESS, Issue 1 2010Michiel van Leeuwen Abstract Aerobic batch cultivations of Candida utilis were carried out in two micro bioreactors with a working volume of 100 ,L operated in parallel. The dimensions of the micro bioreactors were similar as the wells in a 96-well microtiter plate, to preserve compatibility with the current high-throughput cultivation systems. Each micro bioreactor was equipped with an electrochemical sensor array for the online measurement of temperature, pH, dissolved oxygen, and viable biomass concentration. Furthermore, the CO2 production rate was obtained from the online measurement of cumulative CO2 production during the cultivation. The online data obtained by the sensor array and the CO2 production measurements appeared to be very reproducible for all batch cultivations performed and were highly comparable to measurement results obtained during a similar aerobic batch cultivation carried out in a conventional 4L bench-scale bioreactor. Although the sensor chip certainly needs further improvement on some points, this work clearly shows the applicability of electrochemical sensor arrays for the monitoring of parallel micro-scale fermentations, e.g. using the 96-well microtiterplate format. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010 [source] Measuring enthalpy of fast exothermal reaction with micro-reactor-based capillary calorimeterAICHE JOURNAL, Issue 4 2010K. Wang Abstract This work presents a new micro-reactor-based capillary calorimeter for the enthalpy measurement of fast exothermal reactions. The new calorimeter was operated in the continuous way and the reaction enthalpy can be easily measured with the online temperatures from detached sensor chips. A standard reaction system and an industrial reaction system were selected to test this new calorimeter with homogeneous and heterogeneous reaction processes. The measurement was taken place at nearly adiabatic situations and the reaction enthalpy was calculated from the rising of temperature. High accuracy and good repeatability were obtained from this new calorimeter with relative experimental errors less than 3.5% and 2.4%, respectively. The temperature response was quick in this new calorimeter too, which was benefit to the low cost of reactive component. The fast and accurate measurement was contributed to the nice mixing performance and strict plug flowing in the calorimeter. © 2009 American Institute of Chemical Engineers AIChE J, 2010 [source] Oligohis-tags: mechanisms of binding to Ni2+ -NTA surfacesJOURNAL OF MOLECULAR RECOGNITION, Issue 4 2009Steven Knecht Abstract Since immobilized metal ion affinity chromatography (IMAC) was first reported, several modifications have been developed. Among them, Ni2+ immobilized by chelation with nitrilotriacetic acid (NTA) bound to a solid support has become the most common method for the purification of proteins carrying either a C - or N -terminal histidine (His) tag. Despite its broad application in protein purification, only little is known about the binding properties of the His-tag, and therefore almost no thermodynamic and kinetic data are available. In this study, we investigated the binding mechanism of His-tags to Ni2+ -NTA. Different series of oligohistidines and mixed oligohistidines/oligoalanines were synthesized using automated solid-phase peptide synthesis (SPPS). Binding to Ni2+ -NTA was analyzed both qualitatively and quantitatively with surface plasmon resonance (SPR) using commercially available NTA sensor chips from Biacore. The hexahistidine tag shows an apparent equilibrium dissociation constant (KD) of 14,±,1,nM and thus the highest affinity of the peptides synthesized in this study. Furthermore, we could demonstrate that two His separated by either one or four residues are the preferred binding motifs within hexahis tag. Finally, elongation of these referred motifs decreased affinity, probably due to increased entropy costs upon binding. Copyright © 2009 John Wiley & Sons, Ltd. [source] | ||||||||||