Home About us Contact
|
Home About us Contact | ||
|
|
||
Seismic Reflection (seismic + reflection)
Terms modified by Seismic Reflection Selected AbstractsPermo-Triassic development from Ireland to Norway: basin architecture and regional controlsGEOLOGICAL JOURNAL, Issue 6 2009tolfová Abstract Extensive occurrences of Permo-Triassic strata are preserved along the Northwest European Atlantic margin. Seismic reflection and well data are used to describe large-scale Permo-Triassic basin geometries along a swath of the continental shelf more than 2000,km long extending from the Irish to the mid-Norwegian sectors. Successions in the Celtic Sea, the flanks of the Irish Rockall Basin, basins west and north of Scotland, and the Trøndelag and Horda platforms west of Norway are described. The large-scale Permo-Triassic depositional geometries commonly represent erosional remnants of larger basins modified by later rifting episodes, uplift, inversion and continental breakup. However, the interpreted geometries reveal spatial and temporal differences in rifting style. The basins developed above a complex mosaic of petrologically heterogeneous crustal terranes with inherited crustal fabrics, which had a significant impact on the depositional basin geometries. Small Permian basins with growth faulting developed in the southern Celtic Sea region. Extensive, uniformly thick Triassic strata are characteristic of the wide rift basins in the southeastern Rockall Basin and northwest of the Solan Bank High. Thick, fault-controlled basins developed in the Horda and Trøndelag platform regions. The main controls on Permo-Triassic basin architecture are (a) crustal thickness and composition, which determined the development of narrow or wide rift basin geometries, (b) inherited Variscan, Caledonian and Precambrian basement structures and (c) pre-rift palaeotopography. Copyright © 2009 John Wiley & Sons, Ltd. [source] Evolution of an accretionary complex along the north arm of the Island of Sulawesi, IndonesiaISLAND ARC, Issue 1 2004Yusuf Surachman Djajadihardja Abstract Seismic reflections across the accretionary prism of the North Sulawesi provide excellent images of the various structural domains landward of the frontal thrust. The structural domain in the accretionary prism area of the North Sulawesi Trench can be divided into four zones: (i) trench area; (ii) Zone A; (iii) Zone B; and (iv) Zone C. Zone A is an active imbrication zone where a decollement is well imaged. Zone B is dominated by out-of-sequence thrusts and small slope basins. Zone C is structurally high in the forearc basin, overlain by a thick sedimentary sequence. The subducted and accreted sedimentary packages are separated by the decollement. Topography of the oceanic basement is rough, both in the basin and beneath the wedge. The accretionary prism along the North Sulawesi Trench grew because of the collision between eastern Sulawesi and the Bangai,Sula microcontinent along the Sorong Fault in the middle Miocene. This collision produced a large rotation of the north arm of Sulawesi Island. Rotation and northward movement of the north arm of Sulawesi may have resulted in southward subduction and development of the accretionary wedge along North Sulawesi. Lateral variations are wider in the western areas relative to the eastern areas. This is due to greater convergence rates in the western area: 5 km/My for the west and 1.5 km/My for the east. An accretionary prism model indicates that the initiation of growth of the accretionary prism in the North Sulawesi Trench occurred approximately 5 Ma. A comparison between the North Sulawesi accretionary prism and the Nankai accretionary prism of Japan reveals similar internal structures, suggesting similar mechanical processes and structural evolution. [source] BARGEN continuous GPS data across the eastern Basin and Range province, and implications for fault system dynamicsGEOPHYSICAL JOURNAL INTERNATIONAL, Issue 3 2004Nathan A. Niemi SUMMARY We collected data from a transect of continuous Global Positioning System (GPS) sites across the eastern Basin and Range province at latitude 39°N from 1997,2000. Intersite velocities define a region ,350 km wide of broadly distributed strain accumulation at ,10 nstr yr,1. On the western margin of the region, site EGAN, ,10 km north of Ely, Nevada, moved at a rate of 3.9 ± 0.2 mm yr,1 to the west relative to site CAST, which is on the Colorado Plateau. Velocities of most sites to the west of Ely moved at an average rate of ,3 mm yr,1 relative to CAST, defining an area across central Nevada that does not appear to be extending significantly. The late Quaternary geological velocity field, derived using seismic reflection and neotectonic data, indicates a maximum velocity of EGAN with respect to the Colorado Plateau of ,4 mm yr,1, also distributed relatively evenly across the region. The geodetic and late Quaternary geological velocity fields, therefore, are consistent, but strain release on the Sevier Desert detachment and the Wasatch fault appears to have been anomalously high in the Holocene. Previous models suggesting horizontal displacement rates in the eastern Basin and Range near 3 mm yr,1, which focused mainly along the Wasatch zone and Intermountain seismic belt, may overestimate the Holocene Wasatch rate by at least 50 per cent and the Quaternary rate by nearly an order of magnitude, while ignoring potentially major seismogenic faults further to the west. [source] Improving Kirchhoff migration with repeated local plane-wave imaging?GEOPHYSICAL PROSPECTING, Issue 6 2005A SAR-inspired signal-processing approach in prestack depth imaging ABSTRACT A local plane-wave approach of generalized diffraction tomography in heterogeneous backgrounds, equivalent to Kirchhoff summation techniques when applied in seismic reflection, is re-programmed to act as repeated synthetic aperture radar (SAR) imaging for seismic prestack depth migration. Spotlight-mode SAR imaging quickly provides good images of the electromagnetic reflectivity of the ground via fast Fourier transform (FFT)-based signal processing. By calculating only the Green's functions connecting the aircraft to the centre of the illuminated patch, scattering structures around that centre are also recovered. SAR technology requires us to examine seismic imaging from the local point of view, where the quantity and quality of the available information at each image point are what are important, regardless of the survey geometry. When adapted to seismics, a local image of arbitrary size and sampling is obtained by FFT of seismic energy maps in the scattering wavenumber domain around each node of a pre-calculated grid of Green's functions. These local images can be used to generate a classic prestack depth-migrated section by collecting only their centres. However, the local images also provide valuable information around the centre, as in SAR. They can therefore help to pre-analyse prestack depth migration efficiently, and to perform velocity analysis at a very low cost. The FFT-based signal-processing approach allows local, efficient and automatic control of anti-aliasing, noise and resolution, including optimized Jacobian weights. Repeated local imaging could also be used to speed up migration, with interpolation between local images associated with a coarse grid of Green's functions, as an alternative to interpolation of Green's functions. The local images may, however, show distortions due to the local plane-wave approximation, and the velocity variations across their frame. Such effects, which are not necessarily a problem in SAR, should be controlled and corrected to further enhance seismic imaging. Applications to realistic models and to real data show that, despite the distortion effects, the local images can yield similar information to prestack depth migration, including common-image-point gathers for velocity analyses and AVO/AVA effects, at a much lower cost when a small target is considered. [source] Fault configuration produced by initial arc rifting in the Parece Vela Basin as deduced from seismic reflection dataISLAND ARC, Issue 3 2007Mikiya Yamashita Abstract The Parece Vela Basin (PVB), which is a currently inactive back-arc basin of the Philippine Sea Plate, was formed by separation between the Izu-Ogasawara Arc (IOA) and the Kyushu-Palau Ridge (KPR). Elucidating the marks of the past back-arc opening and rifting is important for investigation of its crustal structure. To image its fault configurations and crustal deformation, pre-stack depth migration to multichannel seismic reflection was applied and data obtained by the Japan Agency for Marine-Earth Science and Technology and Metal Mining Agency of Japan and Japan National Oil Corporation (Japan Oil, Gas and Metals National Corporation). Salient results for the pre-stack depth-migrated sections are: (i) deep reflectors exist around the eastern margin of KPR and at the western margin of IOA down to 8 km depth; and (ii) normal fault zones distributed at the eastern margin of the KPR (Fault zone A) and the western margin of the IOA (Fault zone B) have a total displacement of greater than 500 m associated with synrift sediments. Additional normal faults (Fault zone C) exist 20 km east of the Fault zone B. They are covered with sediment, which indicates deposition of recent volcanic products in the IOA. According to those results: (i) the fault displacement of more than 500 m with respect to initial rifting was approximately asymmetric at 25 Ma based on PSDM profiles; and (ii) the faults had reactivated after 23 Ma, based on the age of deformed sediments obtained from past ocean drillings. The age of the base sediments corresponds to those of spreading and rotation after rifting in the PVB. Fault zone C is covered with thick and not deformed volcanogenic sediments from the IOA, which suggests that the fault is inactive. [source] FAULT-RELATED SOLUTION CLEAVAGE IN EXPOSED CARBONATE RESERVOIR ROCKS IN THE SOUTHERN APENNINES, ITALYJOURNAL OF PETROLEUM GEOLOGY, Issue 2 2001A. Billi The deformation associated with a number of kilometre-scale strike-slip fault zones which cut through outcropping carbonate rocks in the Southern Apennines was investigated at regional and outcrop scales. These faults trend roughly east-west and were studied at the Gargano Promontory on the Adriatic Coast (in the Apulian foreland) and in the Matese Mountains, about 120 km to the west (within the Apenninic fold-and-thrust belt). The fault zones are 200,300 m wide and typically comprise a core surrounded by a damage zone. Within fault cores, fault rocks (gouges and cataclasites) typically occur along master slip planes; in damage zones, secondary slip planes and solution cleavage are the most important planar discontinuities. The protolith carbonates surrounding the fault zone at Gargano show little deformation, but they are fractured in the Matese Mountains as a result of an earlier thrust phase. Cleavage surfaces in the damage zone of the studied faults are interpreted to be fault-propagation structures. Our field data indicate that cleavage-fault intersection lines are parallel to the normals of fault slip-vectors. The angle between a fault plane and the associated cleavage was found to be fairly constant (c. 40") at different scales of observation. Finally, the spacing of the solution cleavage surfaces appeared in general to be regular (with a mean of about 22 mm), although it was found to decrease slightly near a fault plane. These results are intended to provide a basis for predicting the architecture of fault zones in buried carbonate reservoirs using seismic reflection and borehole data. [source] Late Quaternary depositional history of the Reuss delta, Switzerland: constraints from high-resolution seismic reflection and georadar surveysJOURNAL OF QUATERNARY SCIENCE, Issue 2 2002Frank O. Nitsche Abstract Glacial erosion has caused overdeepening of many alpine valleys. After retreat of the ice, they were filled with heterogeneous deposits of glacial, lacustrine and fluvial sediments. A typical example of such a valley segment and its infill is the Reuss delta on the southern shore of Lake Lucerne in Switzerland. To obtain a detailed three-dimensional image of this valley segment, the ETH Institute of Geophysics has acquired several two-dimensional, high-resolution seismic and georadar profiles, and conducted a three-dimensional georadar survey. Interpretations of these geophysical data were constrained by a geological core extracted from a borehole 300 m deep near the investigation site. The seismic profiles imaged ca. 600 m of sediment infill above bedrock. Based on their reflection characteristics, five different deposition units were distinguished. These units were interpreted as a succession of clay/silt at the base, followed by different sand units with variable but generally increasing amounts of gravel. This succession represented a prograding delta that filled the southern part of Lake Lucerne. The latest fluvial development of the region is best represented by the georadar data. In particular, the three-dimensional georadar data set provides a detailed view of an ancient braided river channel Copyright © 2002 John Wiley & Sons, Ltd. [source] Combined seismic tomographic and ultrashallow seismic reflection study of an Early Dynastic mastaba, Saqqara, EgyptARCHAEOLOGICAL PROSPECTION, Issue 4 2005Mohamed Metwaly Abstract Mastabas were large rectangular structures built for the funerals and burials of the earliest Pharaohs. One such mastaba was the basic building block that led to the first known stone pyramid, the,>4600-year old Step Pyramid within the Saqqara necropolis of Egypt. We have tested a number of shallow geophysical techniques for investigating in a non-invasive manner the subsurface beneath a large Early Dynastic mastaba located close to the Step Pyramid. After discovering that near-surface sedimentary rocks with unusually high electrical conductivities precluded the use of the ground-penetrating radar method, a very high-resolution seismic data set was collected along a profile that extended the 42.5,m length of the mastaba. A sledgehammer source was used every 0.2,m and the data were recorded using a 48-channel array of single geophones spaced at 0.2,m intervals. Inversions of the direct- and refracted-wave travel times provided P-wave velocity tomograms of the shallow subsurface, whereas relatively standard processing techniques yielded a high-fold (50,80) ultrashallow seismic reflection section. The tomographic and reflection images were jointly interpreted in terms of loose sand and friable limestone layers with low P-wave velocities of 150,650,m,s,1 overlying consolidated limestone and shale with velocities,>,1500,m,s,1. The sharp contact between the low- and high-velocity regimes was approximately horizontal at a depth of ca. 2,m. This contact was the source of a strong seismic reflection. Above this contact, the velocity tomogram revealed moderately high velocities at the surface location of a friable limestone outcrop and two low-velocity blocks that probably outlined sand-filled shafts. Below the contact, three regularly spaced low velocity blocks probably represented tunnels and/or subsurface chambers. Copyright © 2005 John Wiley & Sons, Ltd. [source] 3D seismic imaging of a Tertiary Dyke Swarm in the Southern North Sea, UKBASIN RESEARCH, Issue 2 2010Mostyn Wall ABSTRACT We use three-dimensional (3D) seismic reflection and magnetic data to interpret and describe the 3D geometry of igneous dykes in the southern North Sea. The dykes were emplaced into Paleozoic and Mesozoic sediments and have a common upper termination in Early Tertiary sediments. We interpret the dykes to be part of the British Tertiary volcanic province and estimate the age of the dykes to be 58 Ma. The dykes are characterized by a narrow 0.5,2 km wide vertical disturbance of seismic reflections that have linear plan view geometry. Negative magnetic anomalies directly align with the vertical seismic disturbance zones and indicate the presence of igneous material. Linear coalesced collapse craters are found above the dykes. The collapse craters have been defined and visualized in 3D. Collapse craters have formed above the dyke due to the release of volatiles at the dyke tip and resulting volume loss. Larger craters have potentially formed due to explosive phreatomagmatic interaction between magma and pore water. The collapse craters are a new Earth analogue to Martian pit chain craters. [source] Sedimentary and crustal structure from the Ellesmere Island and Greenland continental shelves onto the Lomonosov Ridge, Arctic OceanGEOPHYSICAL JOURNAL INTERNATIONAL, Issue 1 2010H. Ruth Jackson SUMMARY On the northern passive margin of Ellesmere Island and Greenland, two long wide-angle seismic reflection/refraction (WAR) profiles and a short vertical incident reflection profile were acquired. The WAR seismic source was explosives and the receivers were vertical geophones placed on the sea ice. A 440 km long North-South profile that crossed the shelf, a bathymetric trough and onto the Lomonosov Ridge was completed. In addition, a 110 km long profile along the trough was completed. P -wave velocity models were created by forward and inverse modelling. On the shelf modelling indicates a 12 km deep sedimentary basin consisting of three layers with velocities of 2.1,2.2, 3.1,3.2 and 4.3,5.2 km s,1. Between the 3.1,3.2 km s,1 and 4.3,5.2 km s,1 layers there is a velocity discontinuity that dips seaward, consistent with a regional unconformity. The 4.3,5.2 km s,1 layer is interpreted to be Palaeozoic to Mesozoic age strata, based on local and regional geological constraints. Beneath these layers, velocities of 5.4,5.9 km s,1 are correlated with metasedimentary rocks that outcrop along the coast. These four layers continue from the shelf onto the Lomonosov Ridge. On the Ridge, the bathymetric contours define a plateau 220 km across. The plateau is a basement high, confirmed by short reflection profiles and the velocities of 5.9,6.5 km s,1. Radial magnetic anomalies emanate from the plateau indicating the volcanic nature of this feature. A lower crustal velocity of 6.2,6.7 km s,1, within the range identified on the Lomonosov Ridge near the Pole and typical of rifted continental crust, is interpreted along the entire line. The Moho, based on the WAR data, has significant relief from 17 to 27 km that is confirmed by gravity modelling and consistent with the regional tectonics. In the trough, Moho shallows eastward from a maximum depth of 19,16 km. No indication of oceanic crust was found in the bathymetric trough. [source] Seismic reflection coefficients of faults at low frequencies: a model studyGEOPHYSICAL PROSPECTING, Issue 3 2008Joost Van Der Neut ABSTRACT We use linear slip theory to evaluate seismic reflections at non-welded interfaces, such as faults or fractures, sandwiched between general anisotropic media and show that at low frequencies the real parts of the reflection coefficients can be approximated by the responses of equivalent welded interfaces, whereas the imaginary parts can be related directly to the interface compliances. The imaginary parts of low frequency seismic reflection coefficients at fault zones can be used to estimate the interface compliances, which can be related to fault properties upon using a fault model. At normal incidence the expressions uncouple and the complex-valued P-wave reflection coefficient can be related linearly to the normal compliance. As the normal compliance is highly sensitive to the infill of the interface, it can be used for gas/fluid identification in the fault plane. Alternatively, the tangential compliance of a fault can be estimated from the complex-valued S-wave reflection coefficient. The tangential compliance can provide information on the crack density in a fault zone. Coupling compliances can be identified and quantified by the observation of PS conversion at normal incidence, with a comparable linear relationship. [source] 3D seismic imaging of a Tertiary Dyke Swarm in the Southern North Sea, UKBASIN RESEARCH, Issue 2 2010Mostyn Wall ABSTRACT We use three-dimensional (3D) seismic reflection and magnetic data to interpret and describe the 3D geometry of igneous dykes in the southern North Sea. The dykes were emplaced into Paleozoic and Mesozoic sediments and have a common upper termination in Early Tertiary sediments. We interpret the dykes to be part of the British Tertiary volcanic province and estimate the age of the dykes to be 58 Ma. The dykes are characterized by a narrow 0.5,2 km wide vertical disturbance of seismic reflections that have linear plan view geometry. Negative magnetic anomalies directly align with the vertical seismic disturbance zones and indicate the presence of igneous material. Linear coalesced collapse craters are found above the dykes. The collapse craters have been defined and visualized in 3D. Collapse craters have formed above the dyke due to the release of volatiles at the dyke tip and resulting volume loss. Larger craters have potentially formed due to explosive phreatomagmatic interaction between magma and pore water. The collapse craters are a new Earth analogue to Martian pit chain craters. [source] Effects of Near-Surface Absorption on Reflection Characteristics of Continental Interbedded Strata: the Dagang Oilfield as an ExampleACTA GEOLOGICA SINICA (ENGLISH EDITION), Issue 5 2010LI Guofa Abstract: Due to the effects of seismic wave field interference, the reflection events generated from interbedded and superposed sand and shale strata no longer have an explicit corresponding relationship with the geological interface. The absorption of the near-surface layer decreases the resolution of the seismic wavelet, intensifies the interference of seismic reflections from different sand bodies, and makes seismic data interpretation of thin interbedded strata more complex and difficult. In order to concretely investigate and analyze the effects of the near-surface absorption on seismic reflection characteristics of interbedded strata, and to make clear the ability of current technologies to compensate the near-surface absorption, a geological model of continental interbedded strata with near-surface absorption was designed, and the prestack seismic wave field was numerically simulated with wave equations. Then, the simulated wave field was processed by the prestack time migration, the effects of near-surface absorption on prestack and poststack reflection characteristics were analyzed, and the near-surface absorption was compensated for by inverse Q -filtering. The model test shows that: (1) the reliability of prediction and delineation of a continental reservoir with AVO inversion is degraded due to the lateral variation of the near-surface structure; (2) the corresponding relationships between seismic reflection events and geological interfaces are further weakened as a result of near-surface absorption; and (3) the current technology of absorption compensation probably results in false geological structure and anomaly. Based on the model experiment, the real seismic data of the Dagang Oil Field were analyzed and processed. The seismic reflection characteristics of continental interbedded strata were improved, and the reliability of geological interpretation from seismic data was enhanced. [source] | ||||||||||