Home About us Contact
|
Home About us Contact | ||
|
|
||
Raman Mapping (raman + mapping)
Selected AbstractsFerrocenyl-Ended Thieno,Vinylene Oligomers: Donor,Acceptor Polarization and Mixed-Valence Properties with Emphasis on the Raman Mapping of Localized-to-Delocalized TransitionsCHEMISTRY - A EUROPEAN JOURNAL, Issue 11 2009Juan Casado Dr. Abstract What's your role? New oligothiophene,vinylene compounds have been synthesized to study the role of the conjugated chain in two different cases (see scheme; MV=mixed valence). The electronic and molecular structures were analyzed by means of electronic, X-ray photoelectron, and Raman spectroscopy, together with thermo spectroscopy, electrochemistry, and DFT calculations. New oligothiophene,vinylene compounds have been synthesized in order to study the role of the conjugated chain in two different cases: 1),when push,pull action operates between an electron-donor and an electron-acceptor group at the ends of the thiophene,vinylene conjugated chain, and 2),when mixed-valence action is induced by single oxidation of the same chain functionalized at both terminal positions with ferrocene groups leading to competition between the donor groups. The electronic and molecular structures are analyzed by means of electronic, X-ray photoelectron and Raman spectroscopies, together with thermospectroscopy, electrochemistry and density functional theory calculations. The cyclic voltammetry processes have been followed by spectrochemistry. It is shown that the radical cation of the diferrocenyl derivative is a class,III mixed-valence system (i.e., fully delocalized) according to its Raman spectrum. Moreover, by Raman thermo-spectroscopy the thermal transition of this radical cation from a delocalized (class,III, room temperature) to a localized (class,II, ,160,°C) state is scanned. In all cases the Raman study is paralleled by an electronic absorption spectroscopic analysis. Structure,property relationships are proposed for molecules of two important fields of very active research as that of the non-linear optics (i.e., organic optoelectronic) and that of the mixed-valence systems (i.e., charge-transfer processes). [source] Direct characterization of phase behavior and compatibility in PET/HDPE polymer blends by confocal Raman mappingJOURNAL OF RAMAN SPECTROSCOPY, Issue 3 2007Shuangyan Huan Abstract Morphology, chemical distribution and domain size in poly(ethylene terephthalate)/high-density poly(ethylene) (PET/HDPE) polymer blends of various ratios prepared with and without maleic anhydride have been analyzed with confocal Raman mapping and SEM. The ratioimage method introduced here allows us to obtain enhanced chemical images with higher contrast and reliability. Compatibility numbers (Nc) are calculated to evaluate the compatibility of the blends. The incompatible polymer blends show heterogeneous distribution with phase separation behavior, while the semicompatible blends prepared with maleic anhydride show much smaller subphase distributions with less distinct interphases. After the blending modification by maleic anhydride of only 0.5%, the viscosity status and dispersibility between PET and HDPE could be substantially improved, and the interactions that exist between the two phases have also been proved by ATR-FT-IR results. High-spatial-resolution confocal Raman mapping coupled with the ratioimage method provides a very attractive way to characterize the compatibility and phase behavior of the polymer blend through different blending methodologies. Copyright © 2006 John Wiley & Sons, Ltd. [source] Raman scattering analysis of GaN with various dislocation densitiesPHYSICA STATUS SOLIDI (C) - CURRENT TOPICS IN SOLID STATE PHYSICS, Issue 6 2008T. Kitamura Abstract We characterized GaN crystals with various dislocation densities by micro-Raman spectroscopy. Defects and Strain for the GaN layer were examined through measurements of the Raman shift and the width of the TO phonon bands. The broadening of Raman bands in GaN crystals occurred as the dislocation density increased. The up-shift of the peak frequencies corresponding to compressive strain was observed for the heteroepitaxial samples grown by MOCVD and MBE. The in-plane distribution of defects and strain in epilayers with various dislocation densities was also examined by Raman mapping. The Raman maps showed that the examined phonon frequency and band width in samples fluctuated spatially. The increase of dislocation density in GaN epilayers induced not only the broadening of Raman bands but also increase of fluctuation. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [source] Influence of initial mixing methods on melt-extruded single-walled carbon nanotube,polypropylene nanocompositesPOLYMER ENGINEERING & SCIENCE, Issue 9 2010Vinod K. Radhakrishnan We report the first direct comparison of melt-extruded polypropylene,single-walled carbon nanotube (PP/SWNT) nanocomposites prepared by three different initial mixing methods. The standard deviation of the G-band intensity obtained using Raman mapping was found to be the best measure of dispersion uniformity in the extruded composites, and dispersion uniformity was found to generally correlate with rheological and thermal properties. For all three initial mixing methods, both unmodified and sidewall-functionalized purified SWNTs were evaluated. Surprisingly, in all cases, dodecylated SWNTs prepared using the reductive alkylation method were less uniformly dispersed in the final composite than the unmodified SWNTs. The simplest process, dry blending, resulted in poor nanotube dispersion and only polymer crystallization was significantly affected by the presence of the nanotubes. A slightly more complex rotary evaporation process resulted in significantly more uniform dispersion and significant changes in rheological properties, polymer crystallization, and thermal stability. The most elaborate process tested, hot coagulation, enabled the most uniform dispersion and the greatest change in properties but also resulted in some polymer degradation. POLYM. ENG. SCI., 50:1831,1842, 2010. © 2010 Society of Plastics Engineers [source] | ||||||||||