Home About us Contact
|
Home About us Contact | ||
|
|
||
Production Parameters (production + parameter)
Selected AbstractsEstimation of the Production Parameters of Very Large Medieval Bricks from St. Urban, SwitzerlandARCHAEOMETRY, Issue 1 2002S. Wolf The aim of the present study is to determine the production technology of a particular type of large medieval brick. The firing temperature and their soak times are estimated using a combination of colour and fabric, as well as mineralogical, microstructural and open porosity analysis. A replication experiment was carried out in order to validate the estimated predictions, and to give a realistic idea of the time needed to dry and fire each large brick. The experiment also suggests the temperature distribution and firing atmosphere in the kiln, as well as providing an estimate of fuel consumption. Analytical results and replication both provide information to assess the production technology, the time parameters and the firing temperatures involved in the production of the medieval bricks of St. Urban. [source] Evaluation of Production Parameters with the Vaccinia Virus Expression System Using Microcarrier Attached HeLa CellsBIOTECHNOLOGY PROGRESS, Issue 2 2005Nicole A. Bleckwenn Parameters that affect production of the recombinant reporter protein, EGFP, in the T7 promoter based VOTE vaccinia virus-HeLa cell expression system were examined. Length of infection phase, inducer concentration, and timing of its addition relative to infection were evaluated in 6-well plate monolayer cultures. One hour infection with 1.0 mM IPTG added at the time of infection provided a robust process. For larger scale experiments, anchorage-dependent HeLa cells were grown on 5 g/L Cytodex 3 microcarriers. The change to this dynamic culture environment, with cell-covered microcarriers suspended in culture medium in spinner flasks, suggested a re-examination of the multiplicity of infection (MOI) for this culture type that indicated a need for an increase in the number of virus particles per cell to 5.0, higher than that needed for complete infection in monolayer tissue flask culture. Additionally, dissolved oxygen level and temperature during the protein production phase were evaluated for their effect on EGFP expression in microcarrier spinner flask culture. Both increased dissolved oxygen, based on surface area to volume (SA/V) adjustments, and decreased temperature from 37 to 31 °C showed increases in EGFP production over the course of the production phase. The level of production achieved with this system reached approximately 17 ,g EGFP/106 infected cells. [source] Testing a model for predicting the timing and location of shallow landslide initiation in soil-mantled landscapesEARTH SURFACE PROCESSES AND LANDFORMS, Issue 9 2003M. Casadei Abstract The growing availability of digital topographic data and the increased reliability of precipitation forecasts invite modelling efforts to predict the timing and location of shallow landslides in hilly and mountainous areas in order to reduce risk to an ever-expanding human population. Here, we exploit a rare data set to develop and test such a model. In a 1·7 km2 catchment a near-annual aerial photographic coverage records just three single storm events over a 45 year period that produced multiple landslides. Such data enable us to test model performance by running the entire rainfall time series and determine whether just those three storms are correctly detected. To do this, we link a dynamic and spatially distributed shallow subsurface runoff model (similar to TOPMODEL) to an in,nite slope model to predict the spatial distribution of shallow landsliding. The spatial distribution of soil depth, a strong control on local landsliding, is predicted from a process-based model. Because of its common availability, daily rainfall data were used to drive the model. Topographic data were derived from digitized 1 : 24 000 US Geological Survey contour maps. Analysis of the landslides shows that 97 occurred in 1955, 37 in 1982 and ,ve in 1998, although the heaviest rainfall was in 1982. Furthermore, intensity,duration analysis of available daily and hourly rainfall from the closest raingauges does not discriminate those three storms from others that did not generate failures. We explore the question of whether a mechanistic modelling approach is better able to identify landslide-producing storms. Landslide and soil production parameters were ,xed from studies elsewhere. Four hydrologic parameters characterizing the saturated hydraulic conductivity of the soil and underlying bedrock and its decline with depth were ,rst calibrated on the 1955 landslide record. Success was characterized as the most number of actual landslides predicted with the least amount of total area predicted to be unstable. Because landslide area was consistently overpredicted, a threshold catchment area of predicted slope instability was used to de,ne whether a rainstorm was a signi,cant landslide producer. Many combinations of the four hydrological parameters performed equally well for the 1955 event, but only one combination successfully identi,ed the 1982 storm as the only landslide-producing storm during the period 1980,86. Application of this parameter combination to the entire 45 year record successfully identi,ed the three events, but also predicted that two other landslide-producing events should have occurred. This performance is signi,cantly better than the empirical intensity,duration threshold approach, but requires considerable calibration effort. Overprediction of instability, both for storms that produced landslides and for non-producing storms, appears to arise from at least four causes: (1) coarse rainfall data time scale and inability to document short rainfall bursts and predict pressure wave response; (2) absence of local rainfall data; (3) legacy effect of previous landslides; and (4) inaccurate topographic and soil property data. Greater resolution of spatial and rainfall data, as well as topographic data, coupled with systematic documentation of landslides to create time series to test models, should lead to signi,cant improvements in shallow landslides forecasting. Copyright © 2003 John Wiley & Sons, Ltd. [source] Application of the distributed hydrology soil vegetation model to Redfish Creek, British Columbia: model evaluation using internal catchment dataHYDROLOGICAL PROCESSES, Issue 2 2003Andrew Whitaker Abstract The Distributed Hydrology Soil Vegetation Model is applied to the Redfish Creek catchment to investigate the suitability of this model for simulation of forested mountainous watersheds in interior British Columbia and other high-latitude and high-altitude areas. On-site meteorological data and GIS information on terrain parameters, forest cover, and soil cover are used to specify model input. A stepwise approach is taken in calibrating the model, in which snow accumulation and melt parameters for clear-cut and forested areas were optimized independent of runoff production parameters. The calibrated model performs well in reproducing year-to-year variability in the outflow hydrograph, including peak flows. In the subsequent model performance evaluation for simulation of catchment processes, emphasis is put on elevation and temporal differences in snow accumulation and melt, spatial patterns of snowline retreat, water table depth, and internal runoff generation, using internal catchment data as much as possible. Although the overall model performance based on these criteria is found to be good, some issues regarding the simulation of internal catchment processes remain. These issues are related to the distribution of meteorological variables over the catchment and a lack of information on spatial variability in soil properties and soil saturation patterns. Present data limitations for testing internal model accuracy serve to guide future data collection at Redfish Creek. This study also illustrates the challenges that need to be overcome before distributed physically based hydrologic models can be used for simulating catchments with fewer data resources. Copyright © 2003 John Wiley & Sons, Ltd. [source] Low power switched-current circuits with low sensitivity to the rise/fall time of the clockINTERNATIONAL JOURNAL OF CIRCUIT THEORY AND APPLICATIONS, Issue 5 2010Radek Rudnicki Abstract The switched-current (SI) technique permits realizing analog discrete-time circuits in standard digital CMOS technology. A very important property of the analog part of a system on a chip is the possibility it offers for realizing some functions of a digital circuit, but with reduced power consumption. In this paper, a low power SI integrator is presented. It is shown that an integrator consuming a fraction of a milliwatt can be designed in 0.35µm CMOS technology with the use of narrow transistor channels, and with the channel length as a design parameter. The impact of the rise/fall time of the clock signal on the integrator operation is observed. It is shown that this effect can be reduced when the proper switch dimensions are taken for the integrator. Analysis and measurements of the integrator noise are presented. The integrator was built with equal size transistors, yielding less sensitivity to variations in production parameters. An experimental chip in 0.35µm CMOS technology was fabricated, and measurements are compared with results obtained during analysis and simulations. In order to verify the properties of the designed integrator experimentally, a first-order filter is built with the use of elementary cells on the chip. Copyright © 2008 John Wiley & Sons, Ltd. [source] Sand intake by laying hens and its effect on egg production parametersJOURNAL OF ANIMAL PHYSIOLOGY AND NUTRITION, Issue 4 2008J. Van Der Meulen Summary Soil intake may be the most prominent source of environmental contaminants for free range and organic hens, but there are no quantitative data concerning soil intake by domestic hens. Consumption of soil of 14,32 g a day can be estimated from literature, but such a dilution of nutrient intake seems incompatible with high productivity. In this study laying hens were fed pelleted diets with 0%, 10%, 20%, 25% and 30% of sand addition to determine its effect on productivity. Feed intake, feed and nutrient (feed minus sand) conversion ratio, egg production, egg weight and body weight gain were measured over a 4-week period. Acid insoluble ash concentration in the faeces was measured to determine the accuracy of estimating the soil ingestion by the soil-ingestion equation for wildlife as a way to determine soil ingestion of free range and organic hens under practical circumstances. The hens were able to compensate the dilution of the diet with 20%, 25% and 30% of sand by increasing their feed intake. Feed intake increased significantly and feed to egg conversion ratio decreased significantly with increasing sand levels in the diet. The nutrient to egg conversion ratio of the diet without sand tended to be worse than for the diets with sand, presumably due to the total absence of coarse material in the diet. There were no differences in egg production and egg weight between hens fed the different diets but body weight gain was significantly lower for the hens fed the diets with 20%, 25% and 30% of sand. Estimation of sand ingestion was done by the soil-ingestion equation for wildlife. Provided that the actual dry matter digestibility coefficient of the nutrient part of the diet is taken into account, estimating the soil ingestion according to the soil-ingestion equation for wildlife seems an appropriate way to determine soil ingestion for free range and organic hens under practical circumstances. [source] In situ rumen degradation and in vitro gas production of some selected grains from TurkeyJOURNAL OF ANIMAL PHYSIOLOGY AND NUTRITION, Issue 9-10 2002H. D. Umucalilar Summary An investigation of the dry matter degradability (DMD) and effective dry matter degradability (EDDM) was performed for barley, wheat, rye, corn, triticale and oat samples, using the Nylon-bag technique. Gas production (GP), metabolizable energy (ME) and in vitro organic matter digestibility (IVOMD) were also studied by using Hohenheim gas test. The DM from barley, wheat, rye and triticale was digested rapidly in the rumen, and, at the 48 h of incubation, degradability was found to be approximately about 80%. The higher degradability observed for these grains than for oats and corn was attributable to the structure of these grains. In contrast, DM of corn and oats was degraded very slowly and reached 66.7 and 66.5 at 48 h, respectively. Effective degradability values of barley, wheat, rye, corn, triticale and oats were determined to be 61.4, 69.0, 64.0, 41.7, 66.7 and 58.6% in 5% rumen outflow rate, respectively. At the end of the 48 h incubation, total gas productions in barley, wheat, rye, corn, triticale and oats were estimated to be 83.6, 87.2, 87.5, 83.5, 85.8 and 63.9 ml/200 mg DM, respectively. The mean ME values of these grains calculated from cumulative gas amount at 24 h incubation were 11.8, 12.1, 12.3, 10.9, 12.4 and 10.2 MJ/kg DM, respectively. In vitro digestible organic matter of barley, wheat, rye, corn, triticale and oats were estimated to be 85.0, 87.3, 88.2, 79.5, 89.0 and 72.6%. Percentage overall EDDM (k=5%) of barley, wheat, rye, triticale and oats was positively correlated with in vitro GP at 6 h, cumulative GP at 24 h and total GP at 48 h (p<0.05). As a result, in situ dry matter degradation of grains showed great differences depending on the chemical compositions. In situ EDDM of grains may be predicted from in vitro gas production parameters. [source] ACIDIC ELECTROLYZED WATER PROPERTIES AS AFFECTED BY PROCESSING PARAMETERS AND THEIR RESPONSE SURFACE MODELSJOURNAL OF FOOD PROCESSING AND PRESERVATION, Issue 1 2004GABRIEL O. I. EZEIKE Several studies of acidic electrolyzed (EO) water demonstrated the efficacy of EO water for inactivation of different foodborne pathogens and reported on the chemical species present in EO water. This study was conducted to investigate the effect of production parameters (voltage, NaCl concentration, flow rate, and temperature) on the properties of EO water and to model the complex reactions occurring during the generation of EO water. At 0.1% salt concentration, EO water was produced at 2, 10, and 28 V. However, due to high conductivity of the electrolyte at 0.5% salt concentration, the voltage applied across the cell was limited to 7 V. The electrolyte flow rate was set at 0.5, 2.5, and 4.5 L/mn. For pH and oxidation-reduction potential (ORP), NaCl concentration was the most significant factor followed by voltage, electrolyte flow rate and temperature, respectively. However, in the case of residual chlorine, flow rate was relatively more important than voltage. Response surface methodology yielded models to predict EO water properties as functions of the process parameters studied, with very high coefficients of determination (R2= 0.872 to 0.938). In general, the higher the NaCl concentration and voltage, the higher the ORP and residual chlorine of EO water. Increased electrolyte flow rate will produce EO water with lower ORP and residual chlorine due to the shorter residence time in the electrolytic cell. [source] The influence of different single dietary sources on moult induction in laying hensJOURNAL OF THE SCIENCE OF FOOD AND AGRICULTURE, Issue 14 2007Behzad Mansoori Abstract An investigation was carried out to assess the possibility of using single dietary sources as alternatives to feed deprivation for the induction of moult in commercial laying hens. The study involved six dietary groups of 29 laying hens: unmoulted, dried tomato pomace, alfalfa meal, rice bran, cumin seed meal and feed withdrawal. The birds received the above diets during the moulting period (11 days), and body weight loss and ovary weight regression were measured. Post-moult production parameters (number of eggs produced per hen per day, egg weight, shell weight, yolk colour and Haugh unit) were measured for 12 weeks. Results showed that all dietary sources were as effective as feed withdrawal in causing ovary weight regression in birds. Birds provided with tomato pomace or alfalfa showed lower weight losses than feed-deprived birds at the end of the moulting period. Hens moulted by tomato pomace or alfalfa exhibited post-moult levels of egg production over a 12 week period that were superior to those of hens moulted by feed withdrawal. Post-moult eggs laid by hens moulted by all dietary sources were of comparable quality to eggs from feed-deprived hens and superior to those from unmoulted hens. As fibrous feeds with low metabolisable energy and an appreciable amount of protein, dried tomato pomace and alfalfa meal may be fed to hens on an ad libitum basis for effective moult induction while reducing the stress of severe starvation and retaining comparable egg quality and production. Copyright © 2007 Society of Chemical Industry [source] A Numerical Model for the Optimal Vulcanization of 2D Polar Rubber Compounds Using MicrowavesMACROMOLECULAR THEORY AND SIMULATIONS, Issue 6 2009Gabriele Milani Abstract A numerical model is presented for the optimal vulcanization of 2D extruded polar rubber with microwaves and peroxides. Magnetron power and curing time are used as the input production parameters, and the output mechanical property selected for optimization is the average tensile strength of the item. A 2D thick weather strip is analyzed to validate the model. The electric field is evaluated by means of Yee cells (FDTD approach) and suitably inserted in Fourier's heat transmission law, thus allowing point-by-point temperature profiles to be determined. The temperature is then used to evaluate the degree of peroxidic reticulation, and thus the final tensile strength. A so-called alternating tangent approach based on the bisection method is finally proposed to estimate the optimal magnetron power and curing time. [source] High throughput testing platform for organic Solar CellsPROGRESS IN PHOTOVOLTAICS: RESEARCH & APPLICATIONS, Issue 7 2008Moritz K. Riede Abstract In this paper we present a high throughput testing setup for organic solar cells that is necessary for an efficient analysis of their behaviour. The setup comprises process parameter logging, automated measurement data acquisition and subsequent data management and analysis. Utilising this setup the reproducibility of solar cells and the effect of production parameter variations has been tested with a set of 360 solar cells based on the poly-3-hexylthiophene:1-(3-methoxycarbonyl)-propyl-1-1-phenyl-(6,6)C61 bulk heterojunction. Variations in power conversion efficiency between 1 and 3% were observed on varying production parameters hardly mentioned in literature. The conditions during the vacuum deposition of the aluminium cathode turned out to have a significant effect. The key solar cell parameter affecting the performance was the fill factor (FF). As such the work exemplifies the necessity for a combined approach to analyse the complex behaviour of organic solar cells. The developed high throughput testing setup provides a basis for an efficient testing of production parameter variations and materials and additionally opens the door for statistical analysis. Copyright © 2008 John Wiley & Sons, Ltd. [source] Welfare Index and Reproductive Performance in the SowREPRODUCTION IN DOMESTIC ANIMALS, Issue 6 2006C Munsterhjelm Contents To study the relationship between on-farm welfare and reproductive performance in the sow, the TGI 35L Animal Needs Index was modified for use in Finnish pig production. The modified index had a maximal total score of 100. It was comprised of six categories: ,locomotion' (maximal score 21 for dry sows and 11 for lactating sows), ,social interaction' (12/8), ,floor quality' (16/9), ,stable climate' (16/21), ,feeding' (16/23) and ,health and stockmanship' (19/29). Index scorings were performed separately in farrowing, breeding and gestation units on 28 representative Finnish sow farms. One-year production parameters were collected. Multiple linear regression was used for statistical analysis. Total ANI-points varied between 36.5,68.0 for lactating and 39.5,86.0 for dry sows. Litter size increased with increasing scores for ,feeding' in the dry sow unit. Controlling for breed, high scores for ,health and stockmanship' and ,floor quality' shortened the reproductive cycle, probably because of good leg health. The number of weaned piglets per sow per year (PSY) increased with increasing scores for dry sow ,health and stockmanship', ,floor quality' and an interaction of ,feeding' in the farrowing and mating units. PSY increased with decreasing scores for farrowing pen ,climate'. High-quality floors and stockmanship appear to correlate positively with reproductive performance in the sow. Effects of a welfare-promoting feeding strategy on reproduction are contradictory. [source] Comparison of the effects of different virus infections on performance of three Majorcan grapevine cultivars in field conditionsANNALS OF APPLIED BIOLOGY, Issue 1 2010E. Cretazzo The effects of viruses on grape production and must quality are not fully understood. In this study, the evaluation of the impact of different virus infections on performance of the main autochthonous grapevine varieties of Mallorca (Callet, Manto Negro and Moll) was pursued. Therefore, a large number of vines were observed in field conditions over 4 years and tested by enzyme-linked immunosorbent assay for viruses listed by the international certification programmes. In each variety, some specific virus infections resulted to be more effective than the others in inducing losses in production. In Callet, yield (Y) reduction was over 20% in plants infected by Grapevine fanleaf virus (GFLV). In Moll, plants subject to more than one infection showed over 40% Y decrease. In Manto Negro, the most surprising results were obtained, because plants showed almost 40% Y reduction because of Grapevine leafroll-associated virus-1 (GLRaV-1) infection. In addition, virus infections were linked to some must quality parameter increase in Manto Negro and Moll, but in the majority of cases it was an indirect effect, because the decrease in production parameters played a predominant role by producing an important concentration effect. However, in Manto Negro, anthocyanin content decrease was directly related to GFLV infection. [source] Dietary protein level and natural food management in the culture of blue (Litopenaeus stylirostris) and white shrimp (Litopenaeus vannamei) in microcosmsAQUACULTURE NUTRITION, Issue 3 2003L.R. Martinez-Cordova Abstract The effect of dietary protein level and natural food management on the production parameters of blue and white shrimp, as well as on water quality, was evaluated in a microcosms system (plastic pools simulating aquaculture ponds). Two experimental trials were carried out in the facilities of DICTUS, University of Sonora, Northwest México. Treatment with low protein diet (LP) consisted of a low protein input (diet with 250 g kg,1 crude protein) through the culture period; treatment with high protein diet (HP) consisted of a high protein input (diet with 400 g kg,1 crude protein) through the trial, and finally treatment VP consisted of an adjustment of protein input (diets with 250, 350 or 400 g kg,1 crude protein), depending on the abundance of biota (zooplankton and benthos) in the system. Each species responded differently to the treatments. For blue shrimp, low protein input resulted in the lowest final body weight (12.9 ± 0.6 g) and biomass (696.0 g pool,1). Survival and feed conversion ratio were similar in the three treatments. For white shrimp, the best growth, biomass and food conversion ratio were obtained in the low protein input treatment. Water quality parameters such as nitrate, ammonia and organic matter during the two trials, were better for LP and VP treatments. White shrimp seems to have lower protein requirements than blue shrimp. For the blue shrimp culture, adjusting protein input according to natural food abundance (zooplankton and benthos) in the system, seems to be advantageous because of the possibility of getting a production similar to that obtained with a high protein input through the farming period, but at lower feed cost, and with a lower environmental impact. It is concluded that a high protein input through the whole farming period is not the best feeding strategy for any of the two species. [source] Promotion and contribution of biota in low water exchange ponds farming blue shrimp Litopenaeus stylirostris (Stimpson)AQUACULTURE RESEARCH, Issue 1 2002Luis R Martinez-Cordova Abstract An experimental study was conducted during 20 weeks in Bahia Kino, Sonora, Mexico, in order to evaluate the feasibility of promoting biota in low-water exchange ponds farming blue shrimp, Litopenaeus stylirostris. The effect of that promotion on the production parameters of cultured shrimp as well as on the water quality parameters was evaluated. Treatments consisted of: (i) ponds fed formulated food (FF), and (ii) ponds fed formulated plus promoted natural food (NFF). Phytoplankton, zooplankton and benthos were effectively promoted during some weeks of the culture period. Growth and feed conversion ratio (15.16 g and 1.79 respectively) were significantly better in treatment NFF than in treatment FF (13.89 g and 2.02 respectively). Differences in some of the water quality parameters were observed among treatments. Phosphates (0.15 mg/L versus 0.53 mg/L), and total ammonia-N (0.09 mg/L versus 0.12 mg/L) presented greater concentrations in treatment FF than in the NFF. [source] | |||||||||||||||||||