Home About us Contact | |||
Oceanic Lithosphere (oceanic + lithosphere)
Selected AbstractsDeformation history of the eclogite- and jadeitite-bearing mélange from North Motagua Fault Zone, Guatemala: insights in the processes of a fossil subduction channelGEOLOGICAL JOURNAL, Issue 2 2009Michele Marroni Abstract In Guatemala, along the northern side of the Motagua Valley, a mélange consisting of blocks of eclogite and jadeitite set in a metaserpentinitic and metasedimentary matrix crops out. The metasedimentary rocks display a complex deformation history that includes four tectonic phases, from D1 to D4. The D1 phase occurs only as a relic and is characterized by a mineral assemblage developed under pressure temperature (P,T) conditions of 1.00,1.25,GPa and 206,263°C. The D2 phase, characterized by isoclinal folds, schistosity and mineral/stretching lineation, developed at P,T conditions of 0.70,1.20,GPa and 279,409°C. The following D3 and D4 phases show deformations developed at shallower structural levels. Whereas the D1 phase can be interpreted as the result of underplating of slices of oceanic lithosphere during an intraoceanic subduction, the following phases have been acquired by the mélange during its progressive exhumation through different mechanisms. The deformations related to the D2 and D3 phases can be regarded as acquired by extrusion of the mélange within a subduction channel during a stage of oblique subduction. In addition, the structural evidences indicate that the coupling and mixing of different blocks occurred during the D2 phase, as a result of flow reverse and upward trajectory in the subduction channel. By contrast, the D4 phase can be interpreted as related to extension at shallow structural levels. In this framework, the exhumation-related structures in the mélange indicate that this process, probably long-lived, developed through different mechanisms, active in the subduction channel through time. Copyright © 2009 John Wiley & Sons, Ltd. [source] Seismic evidence for a sharp lithospheric base persisting to the lowermost mantle beneath the CaribbeanGEOPHYSICAL JOURNAL INTERNATIONAL, Issue 3 2008Tadashi Kito SUMMARY Broad-band data from South American earthquakes recorded by Californian seismic networks are analysed using a newly developed seismic wave migration method,the slowness backazimuth weighted migration (SBWM). Using the SBWM, out-of-plane seismic P -wave reflections have been observed. The reflection locations extend throughout the Earth's lower mantle, down to the core,mantle boundary (CMB) and coincide with the edges of tomographically mapped high seismic velocities. Modelling using synthetic seismograms suggests that a narrow (10,15 km) low- or high-velocity lamella with about 2 per cent velocity contrast can reproduce the observed reflected waveforms, but other explanations may exist. Considering the reflection locations and synthetic modelling, the observed out-of-plane energy is well explained by underside reflections off a sharp reflector at the base of the subducted lithosphere. We also detect weaker reflections corresponding to the tomographically mapped top of the slab, which may arise from the boundary between the Nazca plate and the overlying former basaltic oceanic crust. The joint interpretation of the waveform modelling and geodynamic considerations indicate mass flux of the former oceanic lithosphere and basaltic crust across the 660 km discontinuity, linking processes and structure at the top and bottom of the Earth's mantle, supporting the idea of whole mantle convection. [source] Strike-slip earthquakes in the oceanic lithosphere: observations of exceptionally high apparent stressGEOPHYSICAL JOURNAL INTERNATIONAL, Issue 2 2002George L. Choy Summary The radiated energies, ES, and seismic moments, M0, for 942 globally distributed earthquakes that occurred between 1987 to 1998 are examined to find the earthquakes with the highest apparent stresses (,a=,ES/M0, where , is the modulus of rigidity). The globally averaged ,a for shallow earthquakes in all tectonic environments and seismic regions is 0.3 MPa. However, the subset of 49 earthquakes with the highest apparent stresses (,a greater than about 5.0 MPa) is dominated almost exclusively by strike-slip earthquakes that occur in oceanic environments. These earthquakes are all located in the depth range 7,29 km in the upper mantle of the young oceanic lithosphere. Many of these events occur near plate-boundary triple junctions where there appear to be high rates of intraplate deformation. Indeed, the small rapidly deforming Gorda Plate accounts for 10 of the 49 high- ,a events. The depth distribution of ,a, which shows peak values somewhat greater than 25 MPa in the depth range 20,25 km, suggests that upper bounds on this parameter are a result of the strength of the oceanic lithosphere. A recently proposed envelope for apparent stress, derived by taking 6 per cent of the strength inferred from laboratory experiments for young (less than 30 Ma) deforming oceanic lithosphere, agrees well with the upper-bound envelope of apparent stresses over the depth range 5,30 km. The corresponding depth-dependent shear strength for young oceanic lithosphere attains a peak value of about 575 MPa at a depth of 21 km and then diminishes rapidly as the depth increases. In addition to their high apparent stresses, which suggest that the strength of the young oceanic lithosphere is highest in the depth range 10,30 km, our set of high- ,a earthquakes show other features that constrain the nature of the forces that cause interplate motion. First, our set of events is divided roughly equally between intraplate and transform faulting with similar depth distributions of ,a for the two types. Secondly, many of the intraplate events have focal mechanisms with the T -axes that are normal to the nearest ridge crest or subduction zone and P -axes that are normal to the proximate transform fault. These observations suggest that forces associated with the reorganization of plate boundaries play an important role in causing high- ,a earthquakes inside oceanic plates. Extant transform boundaries may be misaligned with current plate motion. To accommodate current plate motion, the pre-existing plate boundaries would have to be subjected to large horizontal transform push forces. A notable example of this is the triple junction near which the second large aftershock of the 1992 April Cape Mendocino, California, sequence occurred. Alternatively, subduction zone resistance may be enhanced by the collision of a buoyant lithosphere, a process that also markedly increases the horizontal stress. A notable example of this is the Aleutian Trench near which large events occurred in the Gulf of Alaska in late 1987 and the 1998 March Balleny Sea M= 8.2 earthquake within the Antarctic Plate. [source] Zircon sensitive high mass-resolution ion microprobe U,Pb and fission-track ages for gabbros and sheeted dykes of the Taitao ophiolite, Southern Chile, and their tectonic implicationsISLAND ARC, Issue 1 2006Ryo Anma Abstract The Late Miocene,Pliocene Taitao ophiolite is composed of a complete sequence of classic oceanic lithosphere and is exposed approximately 50 km southeast of the Chile triple junction, where the Chile Ridge subducts beneath the South American Plate. Gabbros and ultramafic rocks are folded into a complex pattern, but only evidence for block rotation has been reported in the overriding sheeted dyke complex. In the present study, sensitive high mass-resolution ion microprobe U,Pb and fission-track dating methods were applied to zircon crystals separated from gabbros and sheeted dykes. Two sets of radiometric ages of gabbros range between 5.9 ± 0.4 and 5.6 ± 0.1 Ma. These ages coincide within their error ranges and imply rapid intrusion and cooling of gabbros. The U,Pb age of a dacite dyke intruded into the sheeted dyke complex was determined to be 5.2 ± 0.2 Ma. These data indicate that the magmas of the Taitao ophiolite were formed during the 6 Ma Chile Ridge collision event and emplaced in a shorter period than previously thought. A short segment of the Chile Mid-oceanic Ridge must have been emplaced during the 6 Ma event. [source] Tectonic control of bioalteration in modern and ancient oceanic crust as evidenced by carbon isotopesISLAND ARC, Issue 1 2006Harald Furnes Abstract We review the carbon-isotope data for finely disseminated carbonates from bioaltered, glassy pillow rims of basaltic lava flows from in situ slow- and intermediate-spreading oceanic crust of the central Atlantic Ocean (CAO) and the Costa Rica Rift (CRR). The ,13C values of the bioaltered glassy samples from the CAO show a large range, between ,17 and +3, (Vienna Peedee belemnite standard), whereas those from the CRR define a much narrower range, between ,17, and ,7,. This variation can be interpreted as the product of different microbial metabolisms during microbial alteration of the glass. In the present study, the generally low ,13C values (less than ,7,) are attributed to carbonate precipitated from microbially produced CO2 during oxidation of organic matter. Positive ,13C values >0, likely result from lithotrophic utilization of CO2 by methanogenic Archaea that produce CH4 from H2 and CO2. High production of H2 at the slow-spreading CAO crust may be a consequence of fault-bounded, high-level serpentinized peridotites near or on the sea floor, in contrast to the CRR crust, which exhibits a layer-cake pseudostratigraphy with much less faulting and supposedly less H2 production. A comparison of the ,13C data from glassy pillow margins in two ophiolites interpreted to have formed at different spreading rates supports this interpretation. The Jurassic Mirdita ophiolite complex in Albania shows a structural architecture similar to that of the slow-spreading CAO crust, with a similar range in ,13C values of biogenic carbonates. The Late Ordvician Solund,Stavfjord ophiolite complex in western Norway exhibits structural and geochemical evidence for evolution at an intermediate-spreading mid-ocean ridge and displays ,13C signatures in biogenic carbonates similar to those of the CRR. Based on the results of this comparative study, it is tentatively concluded that the spreading rate-dependent tectonic evolution of oceanic lithosphere has a significant control on the evolution of microbial life and hence on the ,13C biosignatures preserved in disseminated biogenic carbonates in glassy, bioaltered lavas. [source] Debris flow and slide deposits at the top of the Internal Liguride ophiolitic sequence, Northern Apennines, Italy: A record of frontal tectonic erosion in a fossil accretionary wedgeISLAND ARC, Issue 1 2001Michele Marroni Abstract In the Northern Apennines, the Internal Liguride units are characterized by an ophiolite sequence that represents the stratigraphic base of a late Jurassic,early Paleocene sedimentary cover. The Bocco Shale represents the youngest deposit recognized in the sedimentary cover of the ophiolite and can be subdivided into two different groups of deep sea sediments. The first group is represented by slide, debris flow and high density turbidity current-derived deposits, whereas the second group consists of thin-bedded turbidites. Facies analysis and provenance studies indicate, for the former group, small and scarcely evoluted flows that rework an oceanic lithosphere and its sedimentary cover. We interpret the Bocco Shale as an ancient example of a deposit related to the frontal tectonic erosion of the accretionary wedge slope. The frontal tectonic erosion resulted in a large removal of materials, from the accretionary wedge front, that was reworked as debris flows and slide deposits sedimented on the lower plate above the trench deposits. The frontal tectonic erosion was probably connected with subduction of oceanic crust characterized by positive topographic relief. This interpretation can be also applied for the origin of analogous deposits of Western Alps and Corsica. [source] Serpentinites of the Zermatt-Saas ophiolite complex and their texture evolutionJOURNAL OF METAMORPHIC GEOLOGY, Issue 3 2004X.-P. Li Abstract The Zermatt-Saas serpentinite complex is an integral member of the Penninic ophiolites of the Central Alps and represents the mantle part of the oceanic lithosphere of the Tethys. Metamorphic textures of the serpentinite preserve the complex mineralogical evolution from primary abyssal peridotite through ocean-floor hydration, subduction-related high-pressure overprint, meso-Alpine greenschist facies metamorphism, and late-stage hydrothermal alteration. The early ocean floor hydration of the spinel harzburgites is still visible in relic pseudomorphic bastite and locally preserved mesh textures. The primary serpentine minerals were completely replaced by antigorite. The stable assemblage in subduction-related mylonitic serpentinites is antigorite,olivine,magnetite ± diopside. The mid-Tertiary greenschist facies overprint is characterized by minor antigorite recrystallization. Textural and mineral composition data of this study prove that the hydrated mineral assemblages remained stable during high-pressure metamorphism of up to 2.5 GPa and 650 °C. The Zermatt-Saas serpentinites thus provide a well documented example for the lack of dehydration of a mantle fragment during subduction to 75 km depth. [source] A general model for the intrusion and evolution of ,mantle' garnet peridotites in high-pressure and ultra-high-pressure metamorphic terranesJOURNAL OF METAMORPHIC GEOLOGY, Issue 2 2000Brueckner Garnet-bearing peridotite lenses are minor but significant components of most metamorphic terranes characterized by high-temperature eclogite facies assemblages. Most peridotite intrudes when slabs of continental crust are subducted deeply (60,120 km) into the mantle, usually by following oceanic lithosphere down an established subduction zone. Peridotite is transferred from the resulting mantle wedge into the crustal footwall through brittle and/or ductile mechanisms. These ,mantle' peridotites vary petrographically, chemically, isotopically, chronologically and thermobarometrically from orogen to orogen, within orogens and even within individual terranes. The variations reflect: (1) derivation from different mantle sources (oceanic or continental lithosphere, asthenosphere); (2) perturbations while the mantle wedges were above subducting oceanic lithosphere; and (3) changes within the host crustal slabs during intrusion, subduction and exhumation. Peridotite caught within mantle wedges above oceanic subduction zones will tend to recrystallize and be contaminated by fluids derived from the subducting oceanic crust. These ,subduction zone peridotites' intrude during the subsequent subduction of continental crust. Low-pressure protoliths introduced at shallow (serpentinite, plagioclase peridotite) and intermediate (spinel peridotite) mantle depths (20,50 km) may be carried to deeper levels within the host slab and undergo high-pressure metamorphism along with the enclosing rocks. If subducted deeply enough, the peridotites will develop garnet-bearing assemblages that are isofacial with, and give the same recrystallization ages as, the eclogite facies country rocks. Peridotites introduced at deeper levels (50,120 km) may already contain garnet when they intrude and will not necessarily be isofacial or isochronous with the enclosing crustal rocks. Some garnet peridotites recrystallize from spinel peridotite precursors at very high temperatures (c. 1200 °C) and may derive ultimately from the asthenosphere. Other peridotites are from old (>1 Ga), cold (c. 850 °C), subcontinental mantle (,relict peridotites') and seem to require the development of major intra-cratonic faults to effect their intrusion. [source] What Happened in the Trans-North China Orogen in the Period 2560-1850 Ma?ACTA GEOLOGICA SINICA (ENGLISH EDITION), Issue 6 2006Guochun ZHAO Abstract: The Trans-North China Orogen (TNCO) was a Paleoproterozic continent-continent collisional belt along which the Eastern and Western Blocks amalgamated to form a coherent North China Craton (NCC). Recent geological, structural, geochemical and isotopic data show that the orogen was a continental margin or Japan-type arc along the western margin of the Eastern Block, which was separated from the Western Block by an old ocean, with eastward-directed subduction of the oceanic lithosphere beneath the western margin of the Eastern Block. At 2550-2520 Ma, the deep subduction caused partial melting of the medium-lower crust, producing copious granitoid magma that was intruded into the upper levels of the crust to form granitoid plutons in the low- to medium-grade granite-greenstone terranes. At 2530-2520 Ma, subduction of the oceanic lithosphere caused partial melting of the mantle wedge, which led to underplating of mafic magma in the lower crust and widespread mafic and minor felsic volcanism in the arc, forming part of the greenstone assemblages. Extension driven by widespread mafic to felsic volcanism led to the development of back-arc and/or intra-arc basins in the orogen. At 2520-2475 Ma, the subduction caused further partial melting of the lower crust to form large amounts of tonalitic-trondhjemitic-granodioritic (TTG) magmatism. At this time following further extension of back-arc basins, episodic granitoid magmatism occurred, resulting in the emplacement of 2360 Ma, ,2250 Ma 2110,21760 Ma and ,2050 Ma granites in the orogen. Contemporary volcano-sedimentary rocks developed in the back-arc or intra-arc basins. At 2150-1920 Ma, the orogen underwent several extensional events, possibly due to subduction of an oceanic ridge, leading to emplacement of mafic dykes that were subsequently metamorphosed to amphibolites and medium- to high-pressure mafic granulites. At 1880-1820 Ma, the ocean between the Eastern and Western Blocks was completely consumed by subduction, and the closing of the ocean led to the continent-arc-continent collision, which caused large-scale thrusting and isoclinal folds and transported some of the rocks into the lower crustal levels or upper mantle to form granulites or eclogites. Peak metamorphism was followed by exhumation/uplift, resulting in widespread development of asymmetric folds and symplectic textures in the rocks. [source] Two-dimensional Numerical Modeling Research on Continent Subduction DynamicsACTA GEOLOGICA SINICA (ENGLISH EDITION), Issue 1 2004WANG Zhimin Abstract Continent subduction is one of the hot research problems in geoscience. New models presented here have been set up and two-dimensional numerical modeling research on the possibility of continental subduction has been made with the finite element software, ANSYS, based on documentary evidence and reasonable assumptions that the subduction of oceanic crust has occurred, the subduction of continental crust can take place and the process can be simplified to a discontinuous plane strain theory model. The modeling results show that it is completely possible for continental crust to be subducted to a depth of 120 km under certain circumstances and conditions. At the same time, the simulations of continental subduction under a single dynamical factor have also been made, including the pull force of the subducted oceanic lithosphere, the drag force connected with mantle convection and the push force of the mid-ocean ridge. These experiments show that the drag force connected with mantle convection is critical for continent subduction. [source] |