Home About us Contact
|
Home About us Contact | ||
|
|
||
Nucleation Mechanism (nucleation + mechanism)
Selected AbstractsKinetic studies on the influence of temperature and growth rate history on crystal growthCRYSTAL RESEARCH AND TECHNOLOGY, Issue 12 2008P. M. Martins Abstract Crystallization experiments of sucrose were performed in a batch crystallizer to study the effect of temperature and growth rate history on the crystal growth kinetics. In one of the growth methods adopted, the isothermal volumetric growth rate (RV) is determined as a function of supersaturation (S) at 35, 40 and 45 ºC. In the other, crystals are allowed to grow at constant supersaturation by automatically controlling the solution temperature as the solute concentration decreased. Using the latter method RV is calculated as the solution is cooled. The obtained results are interpreted using empirical, engineering and fundamental perspectives of crystal growth. Firstly, the overall activation energy (EA) is determined from the empirical growth constants obtained in the isothermal method. The concept of falsified kinetics, widely used in chemical reaction engineering, is then extended to the crystal growth of sucrose in order to estimate the true activation energy (ET) from the diffusion-affected constant, EA. The differences found in the isothermal and constant supersaturation methods are explained from the viewpoint of the spiral nucleation mechanism, taking into account different crystal surface properties caused by the growth rate history in each method. Finally, the crystal growth curve obtained in the batch crystallizer at 40 ºC is compared with the one obtained in a fluidized bed crystallizer at the same temperature. Apparently divergent results are explained by the effects of crystal size, hydrodynamic conditions and growth rate history on the crystallization kinetics of sucrose. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [source] Particle size of powders under hydrothermal conditionsCRYSTAL RESEARCH AND TECHNOLOGY, Issue 10 2003Wen-Jun Li Abstract Various non-oxide (CuI, AgI, AgCl, PbS, CuS and ZnS) and oxide (ZnO, TiO2, SnO2, CeO2 and ZrO2) powders were prepared under hydrothermal conditions to investigate the effects of temperature, pH and precursors on the particle size of powders. It was found that the particle sizes of PbS, CuS and ZnS powders were much smaller than that of CuI, AgI and AgCl powders prepared under the same conditions. The particle sizes of TiO2, SnO2, CeO2 and ZrO2 powders are much smaller than that of ZnO powders prepared under the same conditions. It is concluded that the solution conditions have a certain effect on the particle size of powders under the hydrothermal conditions. The particle size of powders increased with the rising of temperature. Additional factors affecting the particle size were uncovered through studying the nucleation mechanism. The particle size was mainly related to the Madelung constant and the electric charge number of ions. Powders with smaller particle size resulted from systems that possessed the larger Madelung constant and ionic charge number. (© 2003 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [source] Effect of Interface Structure on the Microstructural Evolution of CeramicsJOURNAL OF THE AMERICAN CERAMIC SOCIETY, Issue 8 2006Wook Jo The interface atomic structure was proposed to have a critical effect on microstructure evolution during sintering of ceramic materials. In liquid-phase sintering, spherical grains show normal grain growth behavior without exception, while angular grains often grow abnormally. The coarsening process of spherical grains with a disordered or rough interface atomic structure is diffusion-controlled, because there is little energy barrier for atomic attachments. On the other hand, kink-generating sources such as screw dislocations or two-dimensional (2-D) nuclei are required for angular grains having an ordered or singular interface structure. Coarsening of angular grains based on a 2-D nucleation mechanism could explain the abnormal grain growth behavior. It was also proposed that a densification process is closely related to the interface atomic structure. Enhanced densification by carefully chosen additives during solid state sintering was explained in terms of the grain-boundary structural transition from an ordered to a disordered open structure. [source] Study on the Phase Behavior of High Density Polyethylene , Ethylene Octene Copolymer BlendsMACROMOLECULAR MATERIALS & ENGINEERING, Issue 3 2007Daniela Mileva Abstract The processes of melting and crystallization of blends based on HDPE and EOC were investigated. DSC thermograms showed that a separate crystallization and co-crystallization occurred in the blends studied. Avrami approach was used to analyze the kinetics of crystallization in the blends. It is shown that the Avrami exponent depends on the EOC concentration of the samples studied. The difference in the Avrami parameters for HDPE, EOC and the blends indicated that the nucleation mechanism and dimension of the spherulite growth of the blends were different from that of HDPE to some extent. The crystal growth was examined in the context of the Lauritzen-Hoffman theory. DSC traces obtained at different cooling rates were used for analyzing the non-isothermal crystallization. It was found that the Ozawa model was rather inapplicable for the materials studied. In contrast, the Avrami equation modified by Jeziorny can be used more efficiently to describe the non-isothermal crystallization behavior of HDPE-EOC blends. [source] Polymerization and Sickle Cell Disease: A Molecular ViewMICROCIRCULATION, Issue 2 2004FRANK A. FERRONE ABSTRACT The present molecular-level understanding of polymerization and sickling is reviewed for 2 central questions in sickle hemoglobin pathophysiology, viz., what determines when cells sickle, and what determines when cells get stuck. The description of sickling includes the central aspects of the double nucleation mechanism, as well as recent results on the effects of crowding, with an emphasis on the physiological applicability of this fundamental knowledge. In considering when cells get stuck, new measurements of individual fiber stiffness and the processes of depolymerization are also considered. Finally, a fundamental connection is shown between thermodynamics and rheology. [source] Microemulsion polymerization of styrene stabilized by sodium dodecyl sulfate and short-chain alcoholsJOURNAL OF POLYMER SCIENCE (IN TWO SECTIONS), Issue 19 2001Chorng-Shyan Chern Abstract Styrene microemulsion polymerizations with different short-chain alcohols [n -CiH2i+1OH (CiOH), where i = 4, 5, or 6] as the cosurfactant were investigated. Sodium dodecyl sulfate and sodium persulfate (SPS) were used as the surfactant and initiator, respectively. The desorption of free radicals out of latex particles played an important role in the polymerization kinetics. An Arrhenius expression for the radical desorption rate coefficient was obtained from the polymerizations at temperatures of 50,70 °C. The polymerization kinetics were not very sensitive to the alkyl chain length of alcohols compared with the temperature effect. The maximal polymerization rate in decreasing order was C6OH > C4OH > C5OH. This was related to the differences in the water solubility of CiOH and the structure of the oil,water interface. The feasibility of using a water-insoluble dye to study the particle nucleation mechanisms was also evaluated. The parameters chosen for the study of the particle nucleation mechanisms include the cosurfactant type (CiOH), the SPS concentration, and the initiator type (oil-soluble 2,2,-azobisisobutyronitrile versus water-soluble SPS). © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3199,3210, 2001 [source] | ||||||||||