Home About us Contact
|
Home About us Contact | ||
|
|
||
Negative Electrodes (negative + electrode)
Selected AbstractsGraphite-Grafted Silicon Nanocomposite as a Negative Electrode for Lithium-Ion BatteriesADVANCED MATERIALS, Issue 46 2009Cédric Martin p -Phenylenediamine is used to successively generate two aryl radicals that are required to link silicon nanoparticles to graphite flakes by a phenyl bridge and form new silicon/graphite nanocomposites (see image). Such a covalent grafting technique enhances the cycling ability and the gravimetric capacity of the nano composite-based electrode in a lithium-ion battery. [source] ChemInform Abstract: Sn-0.4BPO4 Composite as a Promising Negative Electrode for Rechargeable Lithium Batteries.CHEMINFORM, Issue 15 2010Abdelmaula Aboulaich Abstract ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 100 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a "Full Text" option. The original article is trackable via the "References" option. [source] Hard Macrocellular Silica Si(HIPE) Foams Templating Micro/Macroporous Carbonaceous Monoliths: Applications as Lithium Ion Battery Negative Electrodes and Electrochemical CapacitorsADVANCED FUNCTIONAL MATERIALS, Issue 19 2009Nicolas Brun Abstract By using Si(HIPEs) as hard, exotemplating matrices, interconnected macro-/microporous carbon monolith-type materials with a surface area of around 600,m2 g,1 are synthesized and shaped. The carbonaceous foams exhibit a conductivity of 20,S cm,1, addressed with excellent mechanical properties (Young's modulus of 0.2,GPa and toughness of 13,J g,1, when the carbon core is optimized). The above-mentioned specificities, combined with the fact that the external shape and size can be easily designed on demand, are of primary importance for applications. The functionality of these carbonaceous monoliths is tested as both an electrochemical capacitor and a lithium ion negative electrode. The electrochemical capacitors' voltage,current profiles exhibit a non-ideal rectangular response, confirming the double-layer behavior of the carbon studied, while the charge-discharge current profile of the electric double-layer capacitor is directly proportional to the scan where the current response during charge and discharge exhibits high reversibility. When acting as a lithium ion negative electrode, after initial irreversibility, a good cyclability is obtained, associated with a stable capacity of 200,mA h g,1 during the first 50 cycles at a reasonable current density (C/10). [source] Silicon Inverse-Opal-Based Macroporous Materials as Negative Electrodes for Lithium Ion BatteriesADVANCED FUNCTIONAL MATERIALS, Issue 12 2009Alexei Esmanski Abstract Several types of silicon-based inverse-opal films are synthesized, characterized by a range of experimental techniques, and studied in terms of electrochemical performance. Amorphous silicon inverse opals are fabricated via chemical vapor deposition. Galvanostatic cycling demonstrates that these materials possess high capacities and reasonable capacity retentions. Amorphous silicon inverse opals perform unsatisfactorily at high rates due to the low conductivity of silicon. The conductivity of silicon inverse opals can be improved by their crystallization. Nanocrystalline silicon inverse opals demonstrate much better rate capabilities but the capacities fade to zero after several cycles. Silicon,carbon composite inverse-opal materials are synthesized by depositing a thin layer of carbon via pyrolysis of a sucrose-based precursor onto the silicon inverse opals. The amount of carbon deposited proves to be insufficient to stabilize the structures and silicon,carbon composites demonstrate unsatisfactory electrochemical behavior. Carbon inverse opals are coated with amorphous silicon producing another type of macroporous composite. These electrodes demonstrate significant improvement both in capacity retentions and in rate capabilities. The inner carbon matrix not only increases the material conductivity but also results in lower silicon pulverization during cycling. [source] Hard Macrocellular Silica Si(HIPE) Foams Templating Micro/Macroporous Carbonaceous Monoliths: Applications as Lithium Ion Battery Negative Electrodes and Electrochemical CapacitorsADVANCED FUNCTIONAL MATERIALS, Issue 19 2009Nicolas Brun Abstract By using Si(HIPEs) as hard, exotemplating matrices, interconnected macro-/microporous carbon monolith-type materials with a surface area of around 600,m2 g,1 are synthesized and shaped. The carbonaceous foams exhibit a conductivity of 20,S cm,1, addressed with excellent mechanical properties (Young's modulus of 0.2,GPa and toughness of 13,J g,1, when the carbon core is optimized). The above-mentioned specificities, combined with the fact that the external shape and size can be easily designed on demand, are of primary importance for applications. The functionality of these carbonaceous monoliths is tested as both an electrochemical capacitor and a lithium ion negative electrode. The electrochemical capacitors' voltage,current profiles exhibit a non-ideal rectangular response, confirming the double-layer behavior of the carbon studied, while the charge-discharge current profile of the electric double-layer capacitor is directly proportional to the scan where the current response during charge and discharge exhibits high reversibility. When acting as a lithium ion negative electrode, after initial irreversibility, a good cyclability is obtained, associated with a stable capacity of 200,mA h g,1 during the first 50 cycles at a reasonable current density (C/10). [source] Response to Galvanic Vestibular Stimulation in Patients with Unilateral Vestibular LossTHE LARYNGOSCOPE, Issue 1 2006Hyun Jik Kim MD Abstract Objectives: This study sought to characterize various responses to galvanic vestibular stimulation (GVS) by comparing GVS-induced eye movements in healthy subjects and patients with vestibular function loss. The study also aimed to estimate the clinical significance of GVS tests. Finally, an effort was made to localize the primary excitation site of stimulation in the vestibular system. Materials and Methods: Three parameters of response to GVS, spontaneous nystagmus, galvanic stimulating nystagmus (GSN), and postgalvanic stimulating nystagmus (PGSN), were evaluated in 20 normal subjects and 14 patients with complete unilateral vestibular function loss resulting from labyrinthectomy or vestibular neurectomy using a three-dimensional video-electronystagmography technique. Results: In normal subjects, GSN was detected in all subjects and was directed toward the negative electrode. PGSN was also detected but was directed toward the opposite electrode. When the negative electrode was attached to the intact side in unilateral vestibular loss subjects, GSN was always directed toward the negative electrode and PGSN was never observed. When the negative electrode was attached to the lesion side, however, GSN was detected in only one case, and PGSN was observed and directed to the intact side in 13 patients. Conclusions: The response to GVS in vestibular loss patients differed from that in normal subjects, which suggests that GVS could be useful for estimating the extent of vestibular function loss. The fact that the patterns of GVS response differed so significantly suggests that the primary site of excitation is not central but is instead the peripheral vestibular organ. [source] Low-voltage electroosmosis pump for stand-alone microfluidics devicesELECTROPHORESIS, Issue 1-2 2003Yuzuru Takamura Abstract Two types of low-voltage electroosmosis pumps were developed using microfabrication technology for usage in handy or stand-alone applications of the micrototal analysis systems (,-TAS) and the lab-on-a-chip. This was done by making a thin (<,1 ,m) region in the flow path and by only applying voltages near this thin region using electrodes inserted into the flow path. The inserted electrodes must be free from bubble formation and be gas-tight in order to avoid pressure leakage. For these electrodes, Ag/AgCl or a gel salt bridge was used. For patterning the gel on the chip, a hydrophilic photopolymerization gel and a photolithographic technique were optimized for producing a gel with higher electric conductivity and higher mechanical strength. For high flow rate application, wide (33.2 mm) and thin (400 nm) pumping channels were compacted into a 1 mm×6 mm area by folding. This pump achieves an 800 Pa static pressure and a flow of 415 nL/min at 10 V. For high-pressure application, a pump was designed with the thin and thick regions in series and positive and negative electrodes were inserted between them alternatively. This pump could increase the pumping pressure without increasing the supply voltage. A pump with 10-stage connections generated a pressure of 25 kPa at 10 V. [source] Electrical stimulation of the vestibular system prevents postoperative nausea and vomitingACTA ANAESTHESIOLOGICA SCANDINAVICA, Issue 9 2000F. Pusch Background: Electrical stimulation of the vestibular system may prevent nausea and vomiting. We studied the influence of transcutaneous impulse stimulation in prevention of postoperative nausea and vomiting (PONV) following gynaecological surgery. Methods: In this randomised study 70 women undergoing elective gynaecological surgery under general anaesthesia were assigned to receive either the activated (stimulation group) or the inactivated (non-stimulation group) impulse stimulator. The stimulator comprises the stimulator itself, two negative electrodes on a headset applied over both mastoid processes and a nuchal positive electrode. The device yielded a pulse frequency of 5 Hz direct current, individually adjustable between 0.5 and 4 mA. A trapezoid stimulation of 50 ms was applied. Nausea, vomiting, dizziness and the amount of antiemetic drugs used were assessed during the first 4 h postoperatively. Results: Lower postoperative nausea scores with a lower incidence of vomiting and postoperative dizziness were found in the stimulation group. A lower amount of antiemetic drugs was needed in the stimulation group when compared to the non-stimulation group (P<0.01 between groups). Conclusion: This study suggests that electrical stimulation of the vestibular system may be useful in prevention of PONV. [source] The electronic and electrochemical properties of the TiFe1,xNix alloysPHYSICA STATUS SOLIDI (A) APPLICATIONS AND MATERIALS SCIENCE, Issue 1 2003A. Szajek Abstract Mechanical alloying (MA) process was introduced to produce nanocrystalline TiFe1,xNix alloys (0 , x , 1). XRD analysis showed that, firstly, after 25 h of milling, the starting mixture of the elements had decomposed into an amorphous phase and, secondly, the annealing in high purity argon at 750 °C for 0.5 h led to formation of the CsCl-type (B2) structures with a crystallite sizes of about 30 nm. These materials, used as negative electrodes for Ni,MH batteries, showed an increase in discharge capacity with a maximum for x = 3/4. The band structure has been studied by the Tight Binding version of the Linear Muffin-Tin method in the Atomic Sphere Approximation (TB LMTO ASA). Increasing content of Ni atoms intensified charge transfer from Ti atoms, extended valence bands and increased the values of the densities of electronic states at the Fermi level. [source] | |||||||||||||