Home About us Contact
|
Home About us Contact | ||
|
|
||
Nm Wavelength (nm + wavelength)
Terms modified by Nm Wavelength Selected AbstractsEffect of reduction/oxidation treatment on blue photorefraction in In:Fe:Cu:LiNbO3 crystalsCRYSTAL RESEARCH AND TECHNOLOGY, Issue 4 2010Suhua Luo Abstract In:Fe:Cu:LiNbO3 crystals with reduced/oxidized treatments were prepared by the Czochralski method. The defect structure was analyzed by the UV-Visible absorption spectra. The blue photorefractive properties, such as the refractive index change, response time, recording sensitivity, dynamic range as well as two-wave coupling gain coefficient, were also investigated at 488 nm wavelength using the two-wave coupling experiment. Comparing the as-grown and oxidized In:Fe:Cu:LiNbO3 crystals, the reduced sample has the highest recording sensitivity and largest dynamic range. Meanwhile, the high diffraction efficiency is still maintained. Experimental results definitely show that reduction treatment is an effective method to improve the blue photorefractive performance of In:Fe:Cu:LiNbO3 crystals. (© 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [source] A12. IPL therapy in the inflammatory stage of rosaceaJOURNAL OF COSMETIC DERMATOLOGY, Issue 2 2002M Rone The inflammatory stage of Rosacea iscommonly treated with topical or oral antibiotics. However, if additional erythema and telangiectasias are present, antibiotics are not successful. IPL (intense pulsed light) is mostly involved when only initial or residual telangiectasias are present. Application of IPL simultaneously with topical or oral medicine could be an effective form of treatment in the inflammatory stage of rosacea. This study was performed in order to detect the effect of IPL application with simultaneous topical antibiotics in inflammatory rosacea and to assess the efficacy of IPL therapy in routine treatment of rosacea. Twenty patients aged between 34 and 70 with papulopustular rosacea (14 female and 7 male) were included in the study. Ten patients (group I) were treated for 21 weeks with topical metronidazole. The other ten patients (group II) received an additional 3 sessions with IPL 515,755 nm Photoderm VL technology over 4 weeks. Treatment affectivity was recorded by digital visualisation and patient satisfaction scale before each IPL session. In all patients, significant reductions in papulopustular elements were observed. Eight out of 10 patients (group I) still showed permanent erythema and telangiectasias despite topical treatment. In 3/10 patients a few telangiectasias remained following the treatment in contrast to 5/10 satisfied group I patients. The most effective treatment was the application of 570 nm and 590 nm wavelength at a fluence of 25,55 J/cm2. Application of IPL in inflammatory rosacea is equally as safe and effective in residual or initial lesions. Moreover, in combination with antibiotics, it promotes reduction of all symptoms, is less time-consuming and is more successful for patients. The pathogenetic influence of IPL in rosacea seems not only to be limited to selective photothermolysis of dilated blood vessels, but may also have immunomodulatory effects on inflammatory processes and possibly on collagen remodelling. The combination of IPL and antibiotics from theoutset of rosacea therapy is considered to be highly effective. [source] Pilot study examining the combined use of pulsed dye laser and topical Imiquimod versus laser alone for treatment of port wine stain birthmarksLASERS IN SURGERY AND MEDICINE, Issue 9 2008Cheng-Jen Chang MD Abstract Background and Objective The objective of this study was to improve port wine stain (PWS) therapeutic outcome in response to laser therapy. Our specific aim was to determine whether the combined use of pulsed dye laser (PDL) therapy and topical Imiquimod versus PDL alone can improve PWS therapeutic outcome. Study Design/Materials and Methods This pilot study involved a retrospective review of 20 subjects, all Asian, with PWS. Subject ages ranged between 3 and 56 years. Upon enrollment, three test sites were prospectively identified on each subject for treatment assignments to the following regimens: (A) PDL+Imiquimod; (B) PDL alone; and (C) Imiquimod alone. PDL test sites received a single treatment with a 585 nm wavelength; 1.5 milliseconds pulse duration; spot size 7 mm using a light dosage of 10 J/cm2 with cryogen spray cooling. For the PDL+Imiquimod and Imiquimod alone test sites, subjects were instructed to apply Imiquimod topically to the sites once daily for 1 month after PDL exposure. Subjects were followed-up at 1, 3, 6, and 12 months after PDL exposure to evaluate each of the three test sites. The primary efficacy measurement was the quantitative assessment of blanching responses as measured by a DermoSpectrometer to calculate the hemoglobin-index of each site at 1, 3, 6, and 12 months after PDL exposure. Subjects were also closely monitored for any adverse effects. Results Based on paired sample test analysis, there were clinically, and statistically significant, differences in blanching responses over time favoring PWS receiving PDL+Imiquimod as compared to either PDL or Imiquimod alone (P<0.05). At 12 months, it should be noted that there was some evidence of redarkening of PWS test sites treated by PDL+Imiquimod and PDL alone, presumably due to revascularization of blood vessels. However, based on comparison of the hemoglobin-indices determined at 1 and 12 months after PDL exposure, there was less revascularization of PWS test sites treated with PDL+Imiquimod as compared to PDL alone (P<0.05). Transient hyperpigmentation was noted in 10% (n,=,2) and 40% (n,=,8) of subjects on the PDL+Imiquimod and PDL alone test sites, respectively. On all sites, hyperpigmentation resolved spontaneously without medical intervention within 6 months. Permanent hypopigmentation or scarring was not observed on any test site. Conclusion Based on the results of this pilot study, PDL+Imiquimod resulted in superior blanching responses over time as compared to PDL alone for treatment of test sites on PWS lesions. Although the PDL+Imiquimod approach is intriguing, clinical validation in large PWS patient samples is required. Lesers Surg. Med. 40:605,610, 2008. © 2008 Wiley-Liss, Inc. [source] Photodynamic therapy with topical 5-aminolevulinic acid as a post-operative adjuvant therapy for an incompletely resected primary nasopharyngeal papillary adenocarcinoma: A case reportLASERS IN SURGERY AND MEDICINE, Issue 5 2006Cheng-Ping Wang MD Abstract Background and Objectives Surgical excision of primary nasopharyngeal papillary adenocarcinoma is sometimes incomplete with remaining microscopic disease. Post-operative radiotherapy only has limited efficacy but may cause many complications. Study Design/Materials and Methods Photodynamic therapy (PDT) was used as a post-operative adjuvant therapy for an incompletely resected primary nasopharyngeal papillary adenocarcinoma. A special form of 20% topical 5-aminolevulinic acid (5-ALA), which was originally a liquid form and became a gel form after applied on the nasopharynx, was used as the photosensitizer. A 2-mm optic fiber delivered the light (633 nm wavelength) to the lesion with a fluence rate of 100 mW/cm2 generated by a diode laser under 5 mm 0° endoscope assistance. The total energy delivered was 150 joules/cm2. Results No significant acute side effect was noted and the nasopharyngeal wound healed rapidly. The patient is alive without locoregional recurrence or distant metastasis for 5 years. Articulation, salivation, and swallowing functions are all well preserved. Conclusion Post-operative adjuvant PDT can successfully cure an otherwise difficult to treat disease with preservation of good life quality of the patient. Potential complications of PDT (e.g., photosensitivity) can be prevented by a special formulation of topical 5-ALA preparation. Lasers Surg. Med. © 2006 Wiley-Liss, Inc. [source] Analysis of fluorescence from algae fossils of the Neoproterozoic Doushantuo formation of China by confocal laser scanning microscopeMICROSCOPY RESEARCH AND TECHNIQUE, Issue 4 2006Huimei Chi Abstract Chinese algae fossils can provide unique information about the evolution of the early life. Thin sections of Neoproterozoic algae fossils, from Guizhou, China, were studied by confocal laser scanning microscopy, and algae fossils were fluorescenced at different wavelengths when excited by laser light of 488 nm, 476 nm, and 568 nm wavelength. When illuminated by 488 nm laser light, images of the algae fossils were sharper and better defined than when illuminated by 476 nm and 568 nm laser light. The algae fossils fluoresce at a wide range of emission wavelengths. The three-dimensional images of the fluorescent algae fossils were compared with the transmission images taken by light microscope. We found that the fluorescence image of the confocal laser scanning microscope in a single optical section could pass for the transmission image taken by a light microscope. We collected images at different sample depths and made a three-dimensional reconstruction of the algae fossils. And on the basis of the reconstruction of the three-dimensional fluorescent images, we conclude that the two algae fossils in our present study are red algae. Microsc. Res. Tech. 69:253,259, 2006. © 2006 Wiley-Liss, Inc. [source] Implementation of tunable erbium doped fiber laser using a broadband fiber mirrorMICROWAVE AND OPTICAL TECHNOLOGY LETTERS, Issue 7 2008Shien-Kuei Liaw Abstract By using a broadband fiber mirror (BFM), a wavelength tunable erbium-doped fiber laser (TEDFL) is demonstrated composed with tunable fiber Bragg grating (TFBG). The BFM acts as a broadband reflector both for the lasing signal and pump source. At pumping power of 100 mW, stable laser output power of 21.35 dBm is obtained at a low threshold pumping power of 4.7 mW. A side mode suppression ratio (SMSR) of 57.9 dB and 16 nm wavelength scan range are demonstrated using a single TFBG. The tunable fiber laser may be a good candidate for vast applications in optical network technologies. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 1722,1724, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23510 [source] Femtosecond laser-assisted formation of channels in sapphire using KOH solutionPHYSICA STATUS SOLIDI - RAPID RESEARCH LETTERS, Issue 6 2008Saulius Juodkazis Abstract We report on wet etching of photomodified regions in crystalline sapphire using KOH solution. Tightly focused femtosecond laser pulses (150 fs at 800 nm wavelength) were used to create void structures enclosed in an amorphised sapphire shell inside the bulk of a crystalline host. The diameter of the amorphous regions can be controlled by pulse energy and was typically 0.5,1.5 µm. The etching rate depends on the distance between adjacent irradiation spots, pulse energy, concentration of etchant and ultrasonic agitation. Amorphised sapphire is etched out in KOH solution. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [source] Laser-doping of silicon carbide for p,n junction and LED fabricationPHYSICA STATUS SOLIDI (A) APPLICATIONS AND MATERIALS SCIENCE, Issue 4 2007Sachin Bet Abstract The high melting point and the limited diffusion of impurities in silicon carbide have greatly restricted the use of conventional ion implantation and furnace to incorporate and activate dopants. A laser doping technique overcomes these obstacles for doping silicon carbide and other wide band gap semiconductors. This paper presents the work on fabrication of p,n junction diodes and blue light emitting diodes using laser doping technique. A p,n junction was created by laser doping a silicon carbide wafer with aluminum (p-type) and nitrogen (n-type). Optical interferometer profilometer scan showed that there was no damage on the surface post laser doping. Secondary ion mass spectrometry (SIMS) was carried to estimate the dopant concentration and depth. The effects of laser doping on the current,voltage characteristics were studied. The junctions were characterized by capacitance,voltage and electroluminescence measurements. A broad electroluminescence peak was observed around 498.8 nm wavelength, characterizing the p,n junction as a blue light-emitting diode. (© 2007 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [source] Fabrication of buried waveguides and nanocrystals in Er3+ -doped oxyfluoride glassPHYSICA STATUS SOLIDI (A) APPLICATIONS AND MATERIALS SCIENCE, Issue 7 2005V. K. Tikhomirov Abstract We report on direct writing of three-dimensional structures within the bulk of the Er3+ -doped oxyfluoride precursor glass using tightly focused femtosecond Ti-sapphire laser pulses at 800 nm wavelength. Buried 1 µm diameter channel and spherical waveguides and three-dimensional periodic arrays of 1 µm diameter dots have been fabricated. In the latter case, the dot could be written with a single 25 fs laser pulse. When the laser pulse energy exceeded 10 µJ/pulse/µm2, the writing resulted in nano-ceraming of the precursor glass and creation of about 2 to 3 nm diameter Er3+ -doped fluoride nanocrystals within the written dots/waveguides, as confirmed by a characteristic change in shape of the 1.5 µm photoluminescence band of the Er3+ ions. The diameter of the buried dots/wave-guides, and the photoinduced change of their refractive index, can be varied by changing the number of femtosecond laser pulses, the beam waist diameter, and/or laser intensity. (© 2005 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [source] Lu2O3:Yb3+ ceramics , a novel gain material for high-power solid-state lasersPHYSICA STATUS SOLIDI (A) APPLICATIONS AND MATERIALS SCIENCE, Issue 1 2005K. Takaichi Abstract We have developed Yb3+:Lu2O3 ceramics with nanocrystalline technology and a vacuum sintering method. A laser diode end-pumped efficient Yb3+:Lu2O3 ceramic laser was demonstrated. A 0.7 W cw output power was obtained with the slope efficiency of ,36% at 1035 nm wavelength, and 0.95 W with the slope efficiency of ,53% at 1079 nm. We classify the Lu2O3:Yb3+ ceramics as gain medium for high-power solid-state lasers (© 2005 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [source] Polarization-resolved degenerate four-wave mixing of CdS nanocrystals in a nonresonant regionPHYSICA STATUS SOLIDI (C) - CURRENT TOPICS IN SOLID STATE PHYSICS, Issue 10 2006S. M. Ma Abstract The third-order susceptibilities of various concentrations of TOPO-passivated CdS nanocrystals (NCs) with the size near the Bohr radius were investigated using polarization-resolved degenerate four-wave mixing (DFWM) in a nonresonant excitation region with 532 nm wavelength and 8 ns pulse width. The second hyperpolarizabilities ,,hxxxx, and ,,hxyyx, of the CdS NCs were ,1.25 × 10,42 m5/V2 and ,3.66 × 10,43 m5/V2, respectively. The ratio (,,hxyyx,/,,hxxxx,) of the hyperpolarizabilities was ,0.29 that indicated a large contribution of electronic polarization process to the third-order nonlinearity of CdS NCs. (© 2006 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [source] Low threshold GaInAs quantum well lasers grown under low growth rate by solid-source MBE for 1200 nm wavelength rangePHYSICA STATUS SOLIDI (C) - CURRENT TOPICS IN SOLID STATE PHYSICS, Issue 3 2006M. Ohta Abstract Optical property dependence on growth rates of highly-strained GaInAs quantum wells (QWs) on GaAs was studied by solid-source molecular beam epitaxy (MBE). Noticeable improvement of the photoluminescence (PL) was observed by lowering the growth rate of highly-strained GaInAs. A sample grown at a growth rate of 0.05 µm/h under a low growth temperature and high As pressure showed a high PL intensity and a flat surface in atomic force microscope (AFM) measurements. The lowest threshold current density of 117 A/cm2/well is achieved for GaInAs/GaAs double QW lasers at 1190 nm wavelength. A low growth rate is found to be effective to grow highly-strained GaInAs QWs. (© 2006 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [source] Analysis of self-pulsation characteristics of InGaN laser diodePHYSICA STATUS SOLIDI (C) - CURRENT TOPICS IN SOLID STATE PHYSICS, Issue 7 2003V. Z. Tronciu Abstract Self-pulsation characteristics of InGaN laser diode emitting at 395 nm wavelength are investigated theoretically and experimentally. The laser structure consists of a multi-quantum well InGaN active layer and an InGaN single quantum well saturable absorber. Self-pulsations with the frequency range from 1.6 to 2.9 GHz have been obtained. The results show a good agreement between measured and calculated characteristics of self-pulsation. We also discuss the impact of the saturable absorber on the laser dynamics. (© 2003 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [source] Investigation of AlGaN/GaN HEMTs on Si Substrate Using BackgatingPHYSICA STATUS SOLIDI (C) - CURRENT TOPICS IN SOLID STATE PHYSICS, Issue 1 2003M. Marso Abstract The influence of a substrate voltage on the dc characteristics of an AlGaN/GaN HEMT on silicon (111) substrate is investigated. This effect, known as backgating, is used to study traps that are located between substrate and 2DEG channel. The transient of the drain current after applying a negative substrate voltage is evaluated for measurements with and without illumination. Several trap contributions are resolved by measurements at different photon energies. A photocurrent is observed up to 600 nm wavelength. Up to this wavelength the backgating effect can be compensated and the drain current restored by a short light pulse. The experiments are performed on completed HEMTs, allowing investigation of the influence of device fabrication technology. [source] Carbon dioxide and pulsed dye laser treatment of angiofibromas in 29 patients with tuberous sclerosisBRITISH JOURNAL OF DERMATOLOGY, Issue 2 2002E. Papadavid SummaryBackground Data on the benefits, adverse effects and appropriate types of laser treatment for angiofibromas (AF) in patients with tuberous sclerosis (TS) are limited. Objectives To evaluate the efficacy and side-effect profile of carbon dioxide (CO2) 10 600 nm wavelength and flashlamp-pumped pulsed dye (FLPDL) 585 nm wavelength lasers in a retrospective study of 29 patients with TS aged 9,48 years. Methods Long-term results, based on clinical improvement of the vascular, fibrous or protuberant types of AF and the presence or absence of side-effects on follow-up visits, were classified as excellent, moderate or poor. Results Results were excellent in most patients with vascular-type AF treated with one or two sessions of FLPDL, but some required up to six treatment sessions. CO2 lasers produced excellent results with considerable long-term improvement in 10 of 13 (77%) patients with fibrous or protuberant AF, specifically in all (three of three) protuberant and 70% (seven of 10) of fibrous AF. Persistent hypertrophic scarring was seen in three of 13 (23%) patients with either fibrous or protuberant AF treated with the continuous wavelength CO2 laser. Treatment with both lasers used in four patients with combined vascular and non-vascular AF components was excellent in three of four (75%) patients. Significant relapse was seen in one patient treated with the CO2 laser. Conclusions CO2 or FLPDL laser treatment should be considered as an effective treatment for patients with disfiguring TS. A combination of lasers may be required to achieve optimal results. [source] Rational Design, Synthesis, and Optical Properties of Film-Forming, Near-Infrared Absorbing, and Fluorescent Chromophores with Multidonors and Large Heterocyclic AcceptorsCHEMISTRY - A EUROPEAN JOURNAL, Issue 35 2009Min Luo Abstract A new series of film-forming, low-bandgap chromophores (1,a,b and 2,a,b) were rationally designed with aid of a computational study, and then synthesized and characterized. To realize absorption and emission above the 1000,nm wavelength, the molecular design focuses on lowering the LUMO level by fusing common heterocyclic units into a large conjugated core that acts an electron acceptor and increasing the charge transfer by attaching the multiple electron-donating groups at the appropriate positions of the acceptor core. The chromophores have bandgap levels of 1.27,0.71,eV, and accordingly absorb at 746,1003,nm and emit at 1035,1290,nm in solution. By design, the relatively high molecular weight (up to 2400,g,mol,1) and non-coplanar structure allow these near-infrared (NIR) chromophores to be readily spin-coated as uniform thin films and doped with other organic semiconductors for potential device applications. Doping with [6,6]-phenyl-C61 butyric acid methyl ester leads to a red shift in the absorption only for 1,a and 2,a. An interesting NIR electrochromism was found for 2,a, with absorption being turned on at 1034,nm when electrochemically switched (at 1000,mV) from its neutral state to a radical cation state. Furthermore, a large Stokes shift (256,318,nm) is also unique for this multidonor,acceptor type of chromophore, indicating a significant structural difference between the ground state and the excited state. Photoluminescence of the film of 2,a was further probed at variable temperatures and the results strongly suggest that the restriction of bond rotations certainly helps to diminish non-radiative decay and thus enhance the luminescence of these large chromophores. [source] Lasers for facial rejuvenation: a reviewINTERNATIONAL JOURNAL OF DERMATOLOGY, Issue 6 2003Evangelia Papadavid MD Background Different types of laser are used for resurfacing and collagen remodeling in cutaneous laser surgery. Methods A systematic review was performed of the different types of laser currently employed for skin rejuvenation. These systems are either ablative [high-energy pulsed or scanned carbon dioxide (CO2) laser emitting at a wavelength of 10,600 nm, single- or variable-pulse or dual ablative/coagulative mode erbium:yttrium aluminum garnet (Er:YAG) laser emitting at a wavelength of 2940 nm, or systems combining both 10,600 nm and 2940 nm wavelengths] or nonablative [Q-switched neodymium:yttrium aluminum garnet (Nd:YAG) laser emitting at a wavelength of 1064 nm, Nd:YAG laser emitting at a wavelength of 1320 nm, or diode laser emitting at a wavelength of 1450 nm]. Different protocols, patient selection, treatment techniques, and complications are discussed for each system. Results New-generation CO2 resurfacing lasers have been successful in the treatment of photodamaged skin and scarring, with a postoperative morbidity dependent on the depth of thermal damage. Because of its minimal penetration, the pulsed Er:YAG laser, usually used in the treatment of more superficial rhytides, produces less postoperative morbidity. Novel ablative systems have been developed and a further understanding of laser,tissue interaction has led to the design of nonablative systems for the treatment of rhytides, scarring, and photodamaged skin, the efficacy and profile of which remain to be evaluated in the long term. Conclusions There are several effective techniques for scar revision and the treatment of aged skin, but all have their drawbacks due to a lack of precise depth control and unwanted damage to the lower layers of the dermis. The Er:YAG laser is the treatment of choice for fine lines and superficial scars, whereas the CO2 laser is better for deeper rhytides and scars. In the future, a combination of lasers may be used for facial rejuvenation. [source] Degree of conversion and temperature rise during polymerization of composite resin samples with blue diodesJOURNAL OF ORAL REHABILITATION, Issue 6 2001A. Kne To ensure an adequate clinical composite filling light source for photopolymerization is of great importance. In everyday clinical conditions commonly used unit for polymerization of composite material is halogen curing unit. The development of new blue superbright light emitting diodes (LED) of 470 nm wavelengths comes as an alternative to standard halogen curing unit of 450,470 nm wavelengths. The purpose of this study was to compare the degree of conversion (DC) and temperature rise of four hybrid composite materials: Tetric Ceram, Pertac II, Valux Plus and Degufill Mineral during 40 s illulmination with standard halogen curing unit Heliolux GTE of 600 mW cm,2 intensity, Elipar Highlight soft-start curing unit of 100 mW cm,2 (10 s) and 700 mW cm,2 (30 s) intensity and 16 blue superbright LED of minimal intensity of 12 mW cm,2 on the surface and 1 mm depth. The results revealed only a little bit higher DC values in case of polymerization with even 66 times stronger halogen curing units which showed twice higher temperature than blue diodes. Temperature and DC obtained are higher on the surface than on 1 mm depth regardless on the light source used. [source] Photodamage to Multidrug-resistant Gram-positive and Gram-negative Bacteria by 870 nm/930 nm Light Potentiates Erythromycin, Tetracycline and CiprofloxacinPHOTOCHEMISTRY & PHOTOBIOLOGY, Issue 3 2010Eric Bornstein We have previously shown that 870 nm/930 nm wavelengths cause photodamage at physiologic temperatures in methicillin-resistant Staphylococcus aureus (MRSA) and Escherichia coli via generation of endogenous radical oxygen species (ROS) and decreased plasma membrane potentials (,,p). We tested MRSA (Strain HSJ216) in vitro with sublethal 870 nm/930 nm laser energy and subinhibitory concentrations of erythromycin, tetracycline, penicillin, rifampin and trimethoprim to surmise whether photodamage could potentiate these antimicrobials. We also tested patient isolates of fluoroquinolone-resistant MRSA and E. coli with subinhibitory concentrations of ciprofloxacin. In MRSA (Strain HSJ216) we observed 97% potentiation (a 1.5 log10 CFU decrease) with erythromycin and tetracycline. In patient isolates of E. coli, we observed 100% potentiation (>3 log10 CFU decrease) in all irradiated samples with ciprofloxacin. To assess whether staphyloxanthin pigment conferred protection against the generated ROS, we created an isogenic carotenoid-deficient mutant of S. aureus that was significantly less tolerant of 870 nm/930 nm exposure than the wild type strain (P < 0.0001). We suggest that antibiotic potentiation results from a photobiological attenuation of ATP-dependent macromolecular synthetic pathways, similar to that observed with daptomycin, via disruption of ,,p and endogenous generation of ROS. With erythromycin, tetracycline and ciprofloxacin, attenuation of energy-dependent efflux systems is also a possibility. [source] | ||||||||||||||||