			Home About us Contact

Molar Crown (molar + crown)

Distribution by Scientific Domains

Medical Sciences	80%

Selected Abstracts

Accidental displacement of a mandibular third molar crown into the parapharyngeal space during extraction

ORAL SURGERY, Issue 2 2008
K. Kamburo
Abstract An unusual accidental displacement of a mandibular third molar crown into the parapharayngeal space in an adult female patient is reported. In combination with clinical examination, conventional and advanced radiographic techniques were utilised in order to locate the crown for retrieval surgery. Under general anaesthesia, an incision starting from buccal sulcus towards distobuccal angle of the second molar at gingival margin was extended to the coronoid process. The dislodged crown was found by means of blunt dissection and grasped with a pair of artery forceps and removed. [source]

Effects of splinted prosthesis supported a wide implant or two implants: a three-dimensional finite element analysis

CLINICAL ORAL IMPLANTS RESEARCH, Issue 4 2005
Heng-Li Huang
Abstract Objectives: Three-dimensional finite element (FE) models of splinted prosthetic crowns were studied and stress analyses were evaluated with different types of implant support, including standard, wide or two implant(s) for partial, posterior edentulous restorations. Material and methods: The FE models were constructed based on a cadaver mandible containing the 2nd premolar and the 1st molar. The crowns of these two teeth were modeled as connected and disconnected to mimic the splinted and non-splinted designs, respectively. One standard implant was placed at the premolar region, while three types of implant support, one at a time (the standard implant, wide implant and two implants), were used to support the molar crown. A 100 N oblique load was applied to the buccal cusp on each crown. The FE simulation was validated experimentally via strain gauge measurement. Results: The experimental data were well correlated with the FE predictions (r2=0.97). When compared with the standard implant used in the molar area, the wide implant and two implants reduced the peak stress in crestal bone by 29,37% for both splinted and non-splinted cases. Inserting the standard implant into both the premolar and molar area, the bone stresses were identical for splinted and non-splinted designs. However, splinting the adjacent crowns has shown to decrease the bone stresses at the premolar region by 25%, while the wide implant or two implants were placed at the molar region. Conclusion: The biomechanical advantages of using the wide implant or two implants are almost identical. The benefit of load sharing by the splinted crowns is notable only when the implants on the premolar and molar regions have different supporting ability. Résumé Des modèles d'éléments finis (FE) tridimensionnels de couronnes prothétiques attachés ont étéétudiés et les analyses de stress ont étéévalués avec différents types de support d'implants comprenant le standard, le large ou deux implants pour des restaurations postérieures partielles. Les modèles FE ont été construits sur base de mandibule de cadavre contenant deux prémolaires et une molaire. Les couronnes de ces deux dents ont été modelées comme connectées et non-connectées pour mimer respectivement les modèles avec attache ou sans. Un implant standard a été placé dans la région prémolaire tandis que trois types d'implants supportaient en un temps (l'implant standard, l'implant large et deux implants) ont été utilisés pour porter la couronne molaire. Une charge oblique de 100 N a été appliquée sur la cuspide vestibulaire de chaque couronne. La simulation FE a été validée expérimentalement via une mesure par jauge de force. Les données expérimentales étaient en bonne corrélation avec les prévisions FE (r2=0,97). Comparés à l'implant standard utilisé dans la zone molaire, l'implant large et la combinaison de deux implants réduisait le pic de stress dans l'os crestal de 29 à 37% tant dans les cas attachés que non-attachés. En insérant l'implant standard dans la zone prémolaire et molaire, le stress osseux était identique pour les modèles attachés et non-attachés. Cependant, l'attache reliant les couronnes adjacentes s'accompagnait d'une dimininution des stress osseux dans la région prémolaire de 25%, tandis que l'implant large ou les deux implants étaient placés dans la région molaire. Les avantages biomécaniques de l'utilisation d'un implant large ou de deux implants sont quasi identiques. Le bénéfice d'une charge partagée par les couronnes solidarisées n'est visible que lorsque les implants des régions prémolaires et molaires ont des capacités de support différentes. Zusammenfassung Ziel: Bei der Rekonstruktion von Lücken im hinteren Seitenzahnbereich untersuchte man in einem dreidimensionalen Finiteelement-Modell (FE) zementierte Kronen und wertete in Belastungs-Analysen verschiedene Implantatabstützungen aus, nämlich auf Standardimplantaten, Wide neck-Implantaten oder auf zwei Implantaten. Material und Methoden: Das FE-Modell basierte auf den Werten eines Leichenunterkiefers in der Region des zweiten Prämolaren und ersten Molaren. Die Kronen auf diesen beiden Zähne wurden jeweils zusammenhängend und einzeln modelliert, so dass man die verblockte und unverblockte Situation nachempfinden konnte. In der Prämolarenregion implantierte man ein Standartimplantat. In der Molarenregion wählte man jeweils eine von drei verschiedenen Varianten der Abstützung für die Kronen: ein Standardimplantat, ein Wide neck-Implantat oder zwei Implantate. Auf den buccalen Höcker jeder Krone liess man schräg eine Kraft von 100 N auftreffen. Die FE-Simulation eichte man experimentell mit Hilfe von Dehnmessstreifen. Resultate: Die experimentellen Daten korrelierten sehr gut mit den FE-Voraussagen (r2=0.97). Verglich man die in der Molarenregion verwendeten Standartimplantate mit den Wide neck-Implantaten und zwei Implantaten, so reduzierte sich die Spitzenbelastung im crestalen Knochen um 29,37%, bei den verblockten wie auch bei den unverblockten Versionen. Setzte man sowohl im Prämolaren wie auch im Molarengebiet Standardimplantate, so war die Knochenbelastung für die verblockte wie auch für die unverblockte Version gleich gross. Wenn aber das Wide neck-Implantat oder zwei Implantate in der Molarenregion gesetzt worden waren, so vermochte die Verblockung der Implantat-Kronen die Knochenbelastung in der Prämolarenregion um 25% zu senken. Zusammenfassung: Ob man das Wide neck-Implantat oder zwei Implantate verwendet, die biomechanischen Vorteile sind beinahe identisch. Man erreicht durch das Verblocken von Kronen erst dann einen spürbaren Vorteil bezüglich Lastenverteilung, wenn die Implantate in der Prämolaren- und Molarenregion verschiedene Tragfähigkeiten aufweisen. Resumen Objetivos: Se estudiaron modelos tridimensionales de elementos finitos (FE) de coronas protésicas y se evaluó el análisis de estrés con diferentes tipos de soporte implantario, incluyendo implantes estándar, anchos o dos implantes, para restauraciones parciales en posteriores edéntulos. Material y métodos: Se construyeron dos modelos FE basados en mandíbula de cadáver conteniendo el 2° premolar y el 1er molar. Las coronas de estos dos dientes se modelaron como conectadas y desconectadas para imitar los diseños conectados y desconectados, respectivamente. Se colocó un implante estándar en la región premolar, mientras que para soportar la corona molar se colocaron tres tipos de implantes, uno a la vez, (un implante estándar, un implante ancho y dos implantes). Se aplicó una carga oblicua de 100N en la cúspide bucal de cada corona. La simulación de elementos finitos se validó experimentalmente por medio de medición de tensión. Resultados: Los datos experimentales se correlacionaron bien con las predicciones FE (r2=0.97). Al comparase a los implantes estándar usados en el área molar, el implante ancho y dos implantes redujeron el pico de estrés en el hueso crestal en un 29,37% tanto para los caso ferulizados como para los no ferulizados. Al insertar el implante estándar tanto en la región premolar como en la molar, los estrés óseos fueron idénticos para los diseños ferulizados como para los no ferulizados. De todos modos, la ferulización de las coronas adyacentes mostró un descenso del estrés óseo en un 25%, mientras el implante ancho o los dos implantes se colocaron en la región molar. Conclusión: Las ventajas biomecánicas de usar el implante ancho o dos implantes fueron casi idénticas. El beneficio de compartir la carga al ferulizar las coronas es notable solo cuando los implantes en las regiones premolar y molar tienen diferente capacidad de soporte. [source]

Oral features and dental health in Hurler Syndrome following hematopoietic stem cell transplantation

INTERNATIONAL JOURNAL OF PAEDIATRIC DENTISTRY, Issue 5 2010
ELEANOR McGOVERN
International Journal of Paediatric Dentistry 2010; 20: 322,329 Background., Hurler Syndrome is associated with a deficiency of a specific lysosomal enzyme involved in the degradation of glycosaminoglycans. Hematopoietic stem cell transplantation (HSCT) in early infancy is undertaken to help prevent the accumulation of glycosaminoglycans and improve organ function. Aim., To investigate the oral features and dental health of patients with Hurler Syndrome who have undergone successful HSCT. Materials and methods., Twenty-five patients (median age 8.6 years) post-HSCT (mean age 9.4 months) underwent oral assessment (mean of 7.5 years post-HSCT). Results., Dental development was delayed. Numerous occlusal anomalies were noted including: open-bite, class III skeletal base, dental spacing, primary molar infra-occlusion and ectopic tooth eruption. Dental anomalies included hypodontia, microdontia, enamel defects, thin tapering canine crowns, pointed molar cusps, bulbous molar crowns and molar taurodontism. Tooth roots were usually short/blunted/spindle-like in permanent molars. The prevalence of dental caries was low in the permanent dentition (mean DMFT 0.7) but high in the primary dentition (mean dmft 2.4). Oral hygiene instruction with plaque and or calculus removal was indicated in 71% of those that were dentate. Conclusion., Patients with Hurler Syndrome post-HSCT are likely to have delayed dental development, a malocclusion, and dental anomalies, particularly hypodontia and microdontia. [source]

Discrimination of extant Pan species and subspecies using the enamel,dentine junction morphology of lower molars

AMERICAN JOURNAL OF PHYSICAL ANTHROPOLOGY, Issue 2 2009
Matthew M. Skinner
Abstract Previous research has demonstrated that species and subspecies of extant chimpanzees and bonobos can be distinguished on the basis of the shape of their molar crowns. Thus, there is potential for fossil taxa, particularly fossil hominins, to be distinguished at similar taxonomic levels using molar crown morphology. Unfortunately, due to occlusal attrition, the original crown morphology is often absent in fossil teeth, and this has limited the amount of shape information used to discriminate hominin molars. The enamel,dentine junction (EDJ) of molar teeth preserves considerable shape information, particularly in regard to the original shape of the crown, and remains present through the early stages of attrition. In this study, we investigate whether the shape of the EDJ of lower first and second molars can distinguish species and subspecies of extant Pan. Micro-computed tomography was employed to non-destructively image the EDJ, and geometric morphometric analytical methods were used to compare EDJ shape among samples of Pan paniscus (N = 17), Pan troglodytes troglodytes (N = 13), and Pan troglodytes verus (N = 18). Discriminant analysis indicates that EDJ morphology distinguishes among extant Pan species and subspecies with a high degree of reliability. The morphological differences in EDJ shape among the taxa are subtle and relate to the relative height and position of the dentine horns, the height of the dentine crown, and the shape of the crown base, but their existence supports the inclusion of EDJ shape (particularly those aspects of shape in the vertical dimension) in the systematic analysis of fossil hominin lower molars. Am J Phys Anthropol, 2009. © 2009 Wiley-Liss, Inc. [source]