Home About us Contact | |||
Mean Marginal Bone Loss (mean + marginal_bone_loss)
Selected AbstractsMandibular overdentures supported by two Brånemark, IMZ or ITI implants: a ten-year prospective randomized studyJOURNAL OF CLINICAL PERIODONTOLOGY, Issue 9 2009Henny J. A. Meijer Abstract Objectives: The aim of this prospective comparative study was to evaluate the survival rate, condition of peri-implant tissues, patient satisfaction and surgical and prosthetic aftercare of the IMZ-implant system (two-stage cylinder type), the Brånemark-implant system (two-stage screw type) and the ITI-implant system (one-stage screw type) supporting a mandibular overdenture during a 10-year follow-up period. Materials and Methods: Three groups of 30 edentulous patients were treated with two endosseous implants in the interforaminal region of the mandible. Clinical and radiographic parameters were evaluated immediately after completion of the prosthetic treatment and after 1, 5 and 10 years of functional loading. Prosthetic and surgical aftercare was scored during the evaluation period, as well as patient satisfaction. Results: The 10-year survival rate was 93% for the IMZ group, 98% for the Brånemark group and 100% for the ITI group (IMZ Clinical Experiences of Computer Numeric Control-Milled Titanium Frameworks Supported by Implants in the Edentulous Jaw: A 5-Year Prospective StudyCLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH, Issue 4 2004Anders Örtorp DDS ABSTRACT Background: Few long-term follow-up studies on treatment concepts using computer numeric control-milled titanium frameworks have been conducted. Objective: To evaluate the clinical and radiographic performance of implant-supported prostheses provided with computer numeric control-milled titanium frameworks in the edentulous jaw and to compare their performance during the first 5 years of function with that of prostheses provided with conventional cast gold alloy frameworks. Materials and Methods: A consecutive group of 126 edentulous patients were randomly provided with 67 prostheses with titanium frameworks (test group) in 23 upper jaws and 44 lower jaws and with 62 conventional prostheses with gold alloy castings (control group) in 31 upper jaws and 31 lower jaws. Clinical and radiographic 5-year data were collected for the test and control groups. Results: The frequency of problems was low, and clinical and radiologic performances were similar in both groups. In the test group, the 5-year cumulative survival rates (CSRs) were 94.9% and 98.3% for implants and titanium prostheses, respectively. The respective corresponding CSRs for the control group were 97.9% and 98.2%. More loaded implants were lost in the maxillas in the test group (p < .01), but this difference was not significant on the patient/prosthesis level (p > .05). Smokers lost more implants than nonsmokers lost (p < .01). Similar survival rates were observed for implants in the mandible. One prosthesis was lost in each group because of the loss of implants. Metal fractures were seen only in the control group, and resin veneer fractures were more frequent in the maxilla in the gold alloy group (p < .05). In the test group, the mean marginal bone loss was 0.5 mm (SD, 0.44) in the maxilla and 0.4 mm (SD, 0.50) in the mandible. A similar pattern of bone reaction was observed in the control group. Mean marginal bone loss was similar for smokers and nonsmokers (p > .05). Conclusion: Computer numeric control-milled titanium frameworks are a viable alternative to gold alloy castings in the edentulous jaw and present clinical and radiologic performances similar to those of conventional gold alloy frameworks during the first 5 years of function. [source] One-Year Prospective Evaluation of the Early Loading of Unsplinted Conical Brånemark Fixtures with Mandibular Overdentures Immediately following SurgeryCLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH, Issue 1 2001Alan G.T. Payne BDS, FCD(SA), MDent ABSTRACT Background: Prospective evaluation of the early loading of unsplinted Branemark implants with mandibular over-dentures opposing conventional dentures is not evident in the implant-related literature. Purpose: To clinically evaluate progressive and early loading of 20 unsplinted conical Brånemark implants in edentulous mandibles with overdentures. Materials and Methods: Ten edentulous patients all had two conical Brånemark implants placed in the anterior mandible with mandatory primary stability with bicortical anchorage. Ball abutment connection was performed simultaneously. Previously constructed conventional mandibular dentures were temporarily relined with tissue conditioner postoperatively and worn with moderation for the first 2 weeks to allow progressive loading. Early loading of the implants followed after 2 weeks, with inclusion of the respective matrices in the mandibular dentures, using a definitive reline procedure. Results: All patients successfully functioned with their mandibular implant overdentures from 2 to 52 weeks postoperatively. Mean marginal bone loss was within established criteria for success:0.22 mm (SD = 0.48 mm) mesially and 0.30 mm (SD = 0.39 mm) distally on the conical implants. Mobility tests using the Periotest instrument became more negative, although not at statistically significant levels. Difficulties in the management of the peri-implant mucosa between surgery and loading at 2 weeks were observed in 40% of the patients. Conclusions: These preliminary 1-year results show that successful early loading of unsplinted conical Brånemark implants with mandibular overdentures is possible. [source] A comparison between immediate loading and immediate restoration in cases of partial posterior mandibular edentulism: a 3-year randomized clinical trialCLINICAL ORAL IMPLANTS RESEARCH, Issue 7 2010Marco Degidi Abstract Objective: The aim of this study was to compare the survival rate, the bone loss and soft-tissue healing patterns of immediately loaded and immediately restored implants in cases of partial posterior mandibular edentulism. Material and methods: Fifty patients with partial posterior mandibular edentulism were randomly selected for two treatments: 25 were included in the immediate loading group (test) and 25 in the immediate restoration group (control). All implants were placed in healed sites with a torque of >25 N cm. The temporary prosthesis of the immediate restoration group was placed so as to avoid occlusal contact in centric and lateral excursions. Both groups received fully occluding final restorations 6 months after surgery. Mean marginal bone loss was assessed at 6-, 12-, 24- and 36-month follow-up examinations by a blinded examiner. Results: A total of 100 implants were placed in the period between February 2004 and October 2006, of which 42 (42%) were for men and 58 (58%) for women. Five and 7 weeks after surgery, mobility of one implant was assessed in one (4%) patient in the test group and one (4%) patient in the control group, respectively. At the 36-month follow-up, the accumulated mean marginal bone loss was 0.987 mm (SD=0.375) for the immediate restoration group (n=48) and 0.947 mm (SD=0.323) for the immediate loading group (n=48). There was no statistically significant difference (P>0.05) for the tested outcome measures between the two procedures. Conclusions: This study was unable to detect any statistically significant difference in the survival rate, bone loss and soft tissue healing patterns between the immediately loaded and the immediately restored implants in cases of partial posterior mandibular edentulism. The immediate temporary rehabilitation of the partially edentulous posterior mandible is a predictable procedure using both procedures. To cite this article: Degidi M, Nardi D, Piattelli A. A comparison between immediate loading and immediate restoration in cases of partial posterior mandibular edentulism: a 3-year randomized clinical trial. Clin. Oral Impl. Res. 21, 2010; 682,687. doi: 10.1111/j.1600-0501.2009.01910.x [source] Clinical Experiences of Computer Numeric Control-Milled Titanium Frameworks Supported by Implants in the Edentulous Jaw: A 5-Year Prospective StudyCLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH, Issue 4 2004Anders Örtorp DDS ABSTRACT Background: Few long-term follow-up studies on treatment concepts using computer numeric control-milled titanium frameworks have been conducted. Objective: To evaluate the clinical and radiographic performance of implant-supported prostheses provided with computer numeric control-milled titanium frameworks in the edentulous jaw and to compare their performance during the first 5 years of function with that of prostheses provided with conventional cast gold alloy frameworks. Materials and Methods: A consecutive group of 126 edentulous patients were randomly provided with 67 prostheses with titanium frameworks (test group) in 23 upper jaws and 44 lower jaws and with 62 conventional prostheses with gold alloy castings (control group) in 31 upper jaws and 31 lower jaws. Clinical and radiographic 5-year data were collected for the test and control groups. Results: The frequency of problems was low, and clinical and radiologic performances were similar in both groups. In the test group, the 5-year cumulative survival rates (CSRs) were 94.9% and 98.3% for implants and titanium prostheses, respectively. The respective corresponding CSRs for the control group were 97.9% and 98.2%. More loaded implants were lost in the maxillas in the test group (p < .01), but this difference was not significant on the patient/prosthesis level (p > .05). Smokers lost more implants than nonsmokers lost (p < .01). Similar survival rates were observed for implants in the mandible. One prosthesis was lost in each group because of the loss of implants. Metal fractures were seen only in the control group, and resin veneer fractures were more frequent in the maxilla in the gold alloy group (p < .05). In the test group, the mean marginal bone loss was 0.5 mm (SD, 0.44) in the maxilla and 0.4 mm (SD, 0.50) in the mandible. A similar pattern of bone reaction was observed in the control group. Mean marginal bone loss was similar for smokers and nonsmokers (p > .05). Conclusion: Computer numeric control-milled titanium frameworks are a viable alternative to gold alloy castings in the edentulous jaw and present clinical and radiologic performances similar to those of conventional gold alloy frameworks during the first 5 years of function. [source] A comparison between immediate loading and immediate restoration in cases of partial posterior mandibular edentulism: a 3-year randomized clinical trialCLINICAL ORAL IMPLANTS RESEARCH, Issue 7 2010Marco Degidi Abstract Objective: The aim of this study was to compare the survival rate, the bone loss and soft-tissue healing patterns of immediately loaded and immediately restored implants in cases of partial posterior mandibular edentulism. Material and methods: Fifty patients with partial posterior mandibular edentulism were randomly selected for two treatments: 25 were included in the immediate loading group (test) and 25 in the immediate restoration group (control). All implants were placed in healed sites with a torque of >25 N cm. The temporary prosthesis of the immediate restoration group was placed so as to avoid occlusal contact in centric and lateral excursions. Both groups received fully occluding final restorations 6 months after surgery. Mean marginal bone loss was assessed at 6-, 12-, 24- and 36-month follow-up examinations by a blinded examiner. Results: A total of 100 implants were placed in the period between February 2004 and October 2006, of which 42 (42%) were for men and 58 (58%) for women. Five and 7 weeks after surgery, mobility of one implant was assessed in one (4%) patient in the test group and one (4%) patient in the control group, respectively. At the 36-month follow-up, the accumulated mean marginal bone loss was 0.987 mm (SD=0.375) for the immediate restoration group (n=48) and 0.947 mm (SD=0.323) for the immediate loading group (n=48). There was no statistically significant difference (P>0.05) for the tested outcome measures between the two procedures. Conclusions: This study was unable to detect any statistically significant difference in the survival rate, bone loss and soft tissue healing patterns between the immediately loaded and the immediately restored implants in cases of partial posterior mandibular edentulism. The immediate temporary rehabilitation of the partially edentulous posterior mandible is a predictable procedure using both procedures. To cite this article: Degidi M, Nardi D, Piattelli A. A comparison between immediate loading and immediate restoration in cases of partial posterior mandibular edentulism: a 3-year randomized clinical trial. Clin. Oral Impl. Res. 21, 2010; 682,687. doi: 10.1111/j.1600-0501.2009.01910.x [source] Direct loading of Nobel Direct® and Nobel Perfect® one-piece implants: a 1-year prospective clinical and radiographic studyCLINICAL ORAL IMPLANTS RESEARCH, Issue 4 2007Per-Olov Östman Abstract Objectives: The aim of this prospective study was to evaluate the Nobel Direct® and Nobel Perfect® one-piece implants (OPIs) when used for immediate function. Material and methods: Forty-eight patients were provided with 115 OPIs for loading with a provisional crown or a bridge within 24 h and followed for at least 12 months with clinical and radiographic examinations. A group of 97 patients previously treated under identical conditions by the same team with 380 two-piece implants (TPIs) for immediate loading in the mandible and maxilla served as the reference group. Results: Six (5.2%) OPIs failed during the follow-up due to extensive bone loss. Five (1.3%) implants failed in the reference group. After 1 year, the mean marginal bone loss was 2.1 mm (SD 1.3) for OPIs and 0.8 mm (SD 1) for TPIs. 20% of OPIs showed more than 3 mm of bone loss compared with 0.6% for TPIs. When compensating for vertical placement depth, OPIs still showed a lower marginal bone level and thus more exposed threads than TPIs. Depending on the criteria used, the success rate for OPIs was 46.1% or 72.2% compared with 85% or 91.6% for TPIs. Conclusions: The Nobel Direct® and Nobel Perfect® OPIs show lower success rates and more bone resorption than TPIs after 1 year in function. Factors such as implant design, insertion depth, rough surface towards the mucosa, in situ preparation and immediate loading may have an influence on the clinical outcome. [source]
| |