Home About us Contact
|
Home About us Contact | ||
|
|
||
Mechanical Data (mechanical + data)
Selected AbstractsQuill Embroidery: A Case Study in the Mechanics of Biological Materials,ADVANCED ENGINEERING MATERIALS, Issue 5 2010Ingrid M. Weiss In quill embroidery, leather goods are beautified with patterns stitched with stripes of the cortex of peacock feathers. Our new structural, geometric and mechanical data for the tail cover feathers of the peacock allow an understanding of the mechanisms of embroidery. This study serves as an example of how biological materials can be analyzed like engineering materials, giving insight into the optimization processes during evolution. [source] Influence of Structural Principles on the Mechanics of a Biological Fiber-Based Composite Material with Hierarchical Organization: The Exoskeleton of the Lobster Homarus americanusADVANCED MATERIALS, Issue 4 2009Helge-Otto Fabritius Abstract The cuticle of the lobster Homarus americanus is a nanocomposite, such as most structural biological materials. It consists of a matrix of chitin-protein fibers associated with various amounts of crystalline and amorphous calcium carbonate in the rigid parts of the body, and is organized hierarchically at all length scales. One prominent design principle found in the hierarchical structure of such biological fibrous composite materials is the twisted plywood structure. In the lobster cuticle, it is formed by superimposing and gradually rotating planes of parallel aligned chitin-protein fibers. To adjust the mechanical properties to the requirements on the macroscopic level, the spatial arrangement and the grade of mineralization of the fibers can be modified. A second design principle of lobster cuticle is its honeycomb-like structure, generated by the well-developed pore canal system, whose twisted ribbon-shaped canals penetrate the cuticle perpendicular to its surface. Due to the hierarchical structure, the mechanical properties of the lobster cuticle have to be investigated at different length scales, which is essential for the understanding of the structure,mechanical function relations of mineralized tissues (e.g., potentially also bone and teeth). In order to investigate the influence of the structural principles on the mechanical properties on the macroscopic scale miniaturized tensile, compression, and shear tests were carried out to obtain integral mechanical data. Characterization of the microstructure included scanning electron microscopy (SEM) combined with energy dispersive X-ray (EDX) measurements. [source] Tribology,Structure Relationships in Silicon Oxycarbide Thin FilmsINTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, Issue 5 2010Joseph V. Ryan Silicon oxycarbide is a versatile material system that is attractive for many applications because of its ability to tune properties such as chemical compatibility, refractive index, electrical conductivity, and optical band gap through changes in composition. One particularly intriguing application lies in the production of biocompatible coatings with good mechanical properties. In this paper, we report on the wide range of mechanical and tribological property values exhibited by silicon oxycarbide thin films deposited by reactive radio frequency magnetron sputtering. Through a change in oxygen partial pressure in the sputtering plasma, the composition of the films was controlled to produce relatively pure SiO2, carbon-doped SiC, and compositions between these limits. Hardness values were 8,20 GPa over this range and the elastic modulus was measured to be between 60 and 220 GPa. We call attention to the fit of the mechanical data to a simple additive bond-mixture model for property prediction. Tribological parameters were measured using a ball-on-disk apparatus and the samples exhibited the same general trends for friction coefficient and wear rate. One film is shown to produce variable low friction behavior and low wear rate, which suggests a solid-state self-lubrication process because of heterogeneity on the nanometer scale. [source] Modeling zinc sulfhydryl bonds in zinc fingersINTERNATIONAL JOURNAL OF QUANTUM CHEMISTRY, Issue 3-4 2001Johan Bredenberg Abstract Molecular dynamics simulations have been carried out employing three different model descriptions of the zinc sulfhydryl interactions in class II fingers. One bonded and two nonbonded models were studied. Two variant structures of the glucocorticoid receptor DNA-binding domain and a NMR structure from a fragment of methionyl-tRNA synthetase were subjected to long-time MD simulations with these models. Our analysis is focused on comparison with experimental and quantum mechanical data, concerning the local Zn-finger and overall structural and dynamic properties for these models. All models performed well, but the nonbonded models appeared to reproduce the protein dynamics in better agreement with experimental data than does the bonded description. © 2001 John Wiley & Sons, Inc. Int J Quant Chem 83: 230,244, 2001 [source] ForceFit: A code to fit classical force fields to quantum mechanical potential energy surfacesJOURNAL OF COMPUTATIONAL CHEMISTRY, Issue 12 2010Benjamin Waldher Abstract The ForceFit program package has been developed for fitting classical force field parameters based upon a force matching algorithm to quantum mechanical gradients of configurations that span the potential energy surface of the system. The program, which runs under UNIX and is written in C++, is an easy-to-use, nonproprietary platform that enables gradient fitting of a wide variety of functional force field forms to quantum mechanical information obtained from an array of common electronic structure codes. All aspects of the fitting process are run from a graphical user interface, from the parsing of quantum mechanical data, assembling of a potential energy surface database, setting the force field, and variables to be optimized, choosing a molecular mechanics code for comparison to the reference data, and finally, the initiation of a least squares minimization algorithm. Furthermore, the code is based on a modular templated code design that enables the facile addition of new functionality to the program. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010 [source] A Simple Laboratory Exercise in Food Structure/Texture Relationships Using a Flatbed ScannerJOURNAL OF FOOD SCIENCE EDUCATION, Issue 1 2002D.W. Stanley ABSTRACT: A laboratory experiment is described that has been designed to allow students to gather meaningful structural and mechanical data with limited equipment. Images are acquired using a computer-interfaced flatbed scanner. Although intended for bread, this approach can be applied to other food products as well. This experiment may be as broad or narrow and as complex or simple as desired. Students have the decided advantage of gathering data themselves, not merely viewing a demonstration of expensive research-grade instrumentation. Experience with image analysis software facilitates a better understanding of quantifying structural data than can be obtained from lecture or text material. Students should become aware of the dependence a specific property, texture, on the underlying structure of food materials and gain an appreciation of the role food structure has in determining many quality parameters. [source] Healing of subfailure ligament injury: comparison between immature and mature ligaments in a rat modelJOURNAL OF ORTHOPAEDIC RESEARCH, Issue 5 2002Paolo P. Provenzano This study evaluated biomechanical properties of healing ligament following subfailure (grade II) injury by comparing young and mature animals in a rat lateral collateral ligament (LCL) model. One randomly selected LCL was stretched in situ using a custom designed device in eighteen young (21 days) and eighteen skeletally mature (8 months) male rats. Animals were euthanized at 0, 7, and 14 days post-surgery, and ligament ultimate stress, strain at failure and laxity were determined (n = 6 pairs per group). At time 0 after introduction of stretch injury, ligament laxity was present in both groups. The mature rats had 54 ± 9% strength of the control while the immature rats had 58 ± 11% of the strength of the control, representing a consistent and significant injury. The immature and mature ligaments showed similar patterns of cellular damage post-injury and had similar modes of mechanical failure. Ligament laxity decreased in each group as healing time increased, however ligament laxity did not completely recover in either group after 2 weeks of healing. After 7 and 14 days of healing, the mature rats, respectively, had only 63 ± 14% and 80 ± 8% strengths of the controls while the immature rats had 94 ± 6% and 94 ± 10%. Hence, mechanical data showed that immature animals recovered their strength after a grade II sprain at a faster rate than mature animals. However, ligament laxity was still present in both groups two weeks after the injury and was not completely removed by growth in the immature group. These findings are clinically relevant since joint laxity after injury is common, and these results may explain the presence of continued instability in a joint injured at a young age. Hence, this study, with a new injury model, showed differences in ligament healing associated with maturity and quantified the clinically observed persistance of ligament laxity. © 2002 Orthopaedic Research Society. Published by Elsevier Science Ltd. All rights reserved. [source] Tension and stress in the rat and rabbit stomach are location- and direction-dependentNEUROGASTROENTEROLOGY & MOTILITY, Issue 3 2005J. Zhao Abstract, Distension studies in the stomach are very common. It is assumed in pressure,volume (barostat) studies of tone and tension in the gastric fundus that the fundus is a sphere, i.e. that the tension in all directions is identical. However, the complex geometry of the stomach indicates a more complex mechanical behaviour. The aim of this study was to determine uniaxial stress,strain properties of gastric strips obtained from rats (n = 12) and rabbits (n = 10). Furthermore, we aimed to study the gastric zero-stress state since the stomach is one of the remaining parts of the gastrointestinal tract where residual strain studies have not been conducted. Longitudinal strips (in parallel with the lesser curvature) and circumferential strips (perpendicular to the lesser curvature) were cut from the gastric fundus (glandular part) and forestomach (non-glandular part). The residual stress was evaluated as bending angles (unit: degree per unit length and negative when bending outwards). The residual strain was computed from the change in length between the zero-stress state and no-load state. The stress,strain test was performed using a tensile test machine. The thickness and width of each strip were measured from digital images. The strips data were compared with data obtained in the intact stomach in vitro. Most residual stresses and strains were bigger in the glandular part than in the forestomach, and in general the rat stomach had higher values than the rabbit stomach. The glandular strips were stiffer than the forestomach strips and the longitudinal glandular strips were stiffer than the circumferential glandular strips (P < 0.05). The gastric strips were stiffer in rats than in rabbits (P < 0.01). The data obtained in the intact rat stomach confirmed the strips data and indicated that those were obtained in the physiological range. In conclusion, the biomechanical properties of the gastric strips from the rat and rabbit are location-dependent, direction-dependent and species-dependent. The assumption in physiological pressure,volume studies that the stomach is a sphere with uniform tension is not valid. Three-dimensional geometric data obtained using imaging technology and mechanical data are needed for evaluation of the stomach function. [source] | |||||||||||||