Home About us Contact
|
Home About us Contact | ||
|
|
||
Maxillary Sinus Floor Augmentation (maxillary + sinus_floor_augmentation)
Selected AbstractsA 5-Year Prospective Follow-Up Study of Implant-Supported Fixed Prostheses in Patients Subjected to Maxillary Sinus Floor Augmentation with an 80:20 Mixture of Bovine Hydroxyapatite and Autogenous BoneCLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH, Issue 2 2004Mats Hallman DDS ABSTRACT Background: Prospective long-term follow-up studies evaluating the use of bone substitutes to enable dental implant placement and integration are rare. Purpose: This study was undertaken to evaluate the survival rate of dental implants placed 6 months after maxillary sinus floor augmentation using a mixture of 80% bovine hydroxyapatite (BH) and 20% autogenous bone (AB). Material and Methods: Twenty patients subjected to 30 maxillary sinus floor grafting procedures using fibrin glue and an 80:20 mixture of BH and AB to enable placement of dental implants 6 months later were followed for 5 years of functional loading. Clinical and radiographic examinations of the grafts and implants were performed. Results: After 5 years of functional loading with fixed bridges, 15 of 108 implants had been lost, giving a cumulative survival rate of 86%. The mean marginal bone loss after 5 years was 1.3 ± 1.1 mm. Conclusion: Grafting of the maxillary sinus with a mixture of BH and AB and later placements of turned implants could be performed with predictable long-term results. All but one of the patients who were observed had functional fixed bridges after 5 years of functional loading. [source] Histologic Analysis of Clinical Biopsies Taken 6 Months and 3 Years after Maxillary Sinus Floor Augmentation with 80% Bovine Hydroxyapatite and 20% Autogenous Bone Mixed with Fibrin GlueCLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH, Issue 2 2001Mats Hallman DDS Abstract: Background: Bovine hydroxyapatite (Bio-Oss®, Geistlich Pharmaceutical, Wollhausen, Switzerland) has been suggested to be used in maxillary sinus floor augmentation procedures prior to or in conjunction with implant placement. However, the long-term histologic fate of this material is not well understood. Purpose: The aim with this study was to histologically evaluate the tissue response in patients to a mixture of bovine hydroxyapatite (BH), autogenous bone, and fibrin glue 6 months and 3 years after a maxillary sinus floor augmentation procedure. Materials and Method: Biopsies were taken from a group of 20 consecutive patients 6 months (n = 16) and 3 years (n = 12) after maxillary sinus floor augmentation with a mixture of BH (80%), autogenous bone (20%), and fibrin glue and prepared for histologic analysis. Results: Light microscopy and morphometry from biopsies taken after 6 months showed various amounts of mineralized bone tissue. The specimen area was occupied by 54.1 ± 12.6% nonmineralized tissue, followed by 21.2 ± 24.5% lamellar bone, 14.5 ± 10.3% BH particles, and 10.2 ± 13.4% woven bone. The nonmineralized tissue seen in bone-forming areas consisted of a loose connective tissue, rich with vessels and cells. There were no signs of resorption of the BH particles. The lamellar bone appeared to have originated from the recipient site and was seldom in contact with the BH particles. After 3 years, the nonmineralized tissue area had decreased to 36.0 ± 19.0% (p > .05) and consisted mainly of bone marrow tissue. The surface area of lamellar bone had increased to 50.7 ± 22.8% (p > .05), and there was almost no immature bone. The mean specimen area occupied by BH particles, was 12.4 ± 8.7% and had not changed from 6 months (not significant). Moreover, the sizes of the particles were similar after 6 months and 3 years. The degree of BH particle,bone contact had increased from 28.8%± 19.9% after 6 months to 54.5 ± 28.8% after 3 years (p > .05). Conclusion: Histology of specimens from maxillary sinuses augmented with 80% BH particles, 20% autogenous bone, and fibrin glue showed a positive bone tissue response after 6 months and 3 years after augmentation of the maxillary sinus floor prior to implant placement in a group fo 20 patients. The bone surrounding and in contact with the BH particles after 6 months was mainly immature woven bone, which with time was replaced by mature lamellar bone filling the interparticle space as observed in the 3-year specimens. Moreover, bone-integrated BH particles seem to be resistant to resorption. The results indicate that the procedure may be considered when only small amounts of intraoral autogenous bone graft are available. [source] Sinus membrane elevation and simultaneous insertion of dental implants: a new surgical technique in maxillary sinus floor augmentationPERIODONTOLOGY 2000, Issue 1 2008Stefan Lundgren First page of article [source] Bone Reformation and Implant Integration following Maxillary Sinus Membrane Elevation: An Experimental Study in PrimatesCLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH, Issue 1 2006Vinicius C Palma DDS ABSTRACT Background:, Recent clinical studies have described maxillary sinus floor augmentation by simply elevating the maxillary sinus membrane without the use of adjunctive grafting materials. Purpose:, This experimental study aimed at comparing the histologic outcomes of sinus membrane elevation and simultaneous placement of implants with and without adjunctive autogenous bone grafts. The purpose was also to investigate the role played by the implant surface in osseointegration under such circumstances. Materials and Methods:, Four tufted capuchin primates had all upper premolars and the first molar extracted bilaterally. Four months later, the animals underwent maxillary sinus membrane elevation surgery using a replaceable bone window technique. The schneiderian membrane was kept elevated by insertion of two implants (turned and oxidized, Brånemark System®, Nobel Biocare AB, Göteborg, Sweden) in both sinuses. The right sinus was left with no additional treatment, whereas the left sinus was filled with autogenous bone graft. Implant stability was assessed through resonance frequency analysis (OsstellTM, Integration Diagnostics AB, Göteborg, Sweden) at installation and at sacrifice. The pattern of bone formation in the experimental sites and related to the different implant surfaces was investigated using fluorochromes. The animals were sacrificed 6 months after the maxillary sinus floor augmentation procedure for histology and histomorphometry (bone-implant contact, bone area in threads, and bone area in rectangle). Results:, The results showed no differences between membrane-elevated and grafted sites regarding implant stability, bone-implant contacts, and bone area within and outside implant threads. The oxidized implants exhibited improved integration compared with turned ones as higher values of bone-implant contact and bone area within threads were observed. Conclusions:, The amount of augmented bone tissue in the maxillary sinus after sinus membrane elevation with or without adjunctive autogenous bone grafts does not differ after 6 months of healing. New bone is frequently deposited in contact with the schneiderian membrane in coagulum-alone sites, indicating the osteoinductive potential of the membrane. Oxidized implants show a stronger bone tissue response than turned implants in sinus floor augmentation procedures. [source] A 5-Year Prospective Follow-Up Study of Implant-Supported Fixed Prostheses in Patients Subjected to Maxillary Sinus Floor Augmentation with an 80:20 Mixture of Bovine Hydroxyapatite and Autogenous BoneCLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH, Issue 2 2004Mats Hallman DDS ABSTRACT Background: Prospective long-term follow-up studies evaluating the use of bone substitutes to enable dental implant placement and integration are rare. Purpose: This study was undertaken to evaluate the survival rate of dental implants placed 6 months after maxillary sinus floor augmentation using a mixture of 80% bovine hydroxyapatite (BH) and 20% autogenous bone (AB). Material and Methods: Twenty patients subjected to 30 maxillary sinus floor grafting procedures using fibrin glue and an 80:20 mixture of BH and AB to enable placement of dental implants 6 months later were followed for 5 years of functional loading. Clinical and radiographic examinations of the grafts and implants were performed. Results: After 5 years of functional loading with fixed bridges, 15 of 108 implants had been lost, giving a cumulative survival rate of 86%. The mean marginal bone loss after 5 years was 1.3 ± 1.1 mm. Conclusion: Grafting of the maxillary sinus with a mixture of BH and AB and later placements of turned implants could be performed with predictable long-term results. All but one of the patients who were observed had functional fixed bridges after 5 years of functional loading. [source] Histologic Analysis of Clinical Biopsies Taken 6 Months and 3 Years after Maxillary Sinus Floor Augmentation with 80% Bovine Hydroxyapatite and 20% Autogenous Bone Mixed with Fibrin GlueCLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH, Issue 2 2001Mats Hallman DDS Abstract: Background: Bovine hydroxyapatite (Bio-Oss®, Geistlich Pharmaceutical, Wollhausen, Switzerland) has been suggested to be used in maxillary sinus floor augmentation procedures prior to or in conjunction with implant placement. However, the long-term histologic fate of this material is not well understood. Purpose: The aim with this study was to histologically evaluate the tissue response in patients to a mixture of bovine hydroxyapatite (BH), autogenous bone, and fibrin glue 6 months and 3 years after a maxillary sinus floor augmentation procedure. Materials and Method: Biopsies were taken from a group of 20 consecutive patients 6 months (n = 16) and 3 years (n = 12) after maxillary sinus floor augmentation with a mixture of BH (80%), autogenous bone (20%), and fibrin glue and prepared for histologic analysis. Results: Light microscopy and morphometry from biopsies taken after 6 months showed various amounts of mineralized bone tissue. The specimen area was occupied by 54.1 ± 12.6% nonmineralized tissue, followed by 21.2 ± 24.5% lamellar bone, 14.5 ± 10.3% BH particles, and 10.2 ± 13.4% woven bone. The nonmineralized tissue seen in bone-forming areas consisted of a loose connective tissue, rich with vessels and cells. There were no signs of resorption of the BH particles. The lamellar bone appeared to have originated from the recipient site and was seldom in contact with the BH particles. After 3 years, the nonmineralized tissue area had decreased to 36.0 ± 19.0% (p > .05) and consisted mainly of bone marrow tissue. The surface area of lamellar bone had increased to 50.7 ± 22.8% (p > .05), and there was almost no immature bone. The mean specimen area occupied by BH particles, was 12.4 ± 8.7% and had not changed from 6 months (not significant). Moreover, the sizes of the particles were similar after 6 months and 3 years. The degree of BH particle,bone contact had increased from 28.8%± 19.9% after 6 months to 54.5 ± 28.8% after 3 years (p > .05). Conclusion: Histology of specimens from maxillary sinuses augmented with 80% BH particles, 20% autogenous bone, and fibrin glue showed a positive bone tissue response after 6 months and 3 years after augmentation of the maxillary sinus floor prior to implant placement in a group fo 20 patients. The bone surrounding and in contact with the BH particles after 6 months was mainly immature woven bone, which with time was replaced by mature lamellar bone filling the interparticle space as observed in the 3-year specimens. Moreover, bone-integrated BH particles seem to be resistant to resorption. The results indicate that the procedure may be considered when only small amounts of intraoral autogenous bone graft are available. [source] Histological and histomorphometrical analyses of biopsies harvested 11 years after maxillary sinus floor augmentation with deproteinized bovine and autogenous boneCLINICAL ORAL IMPLANTS RESEARCH, Issue 9 2010Arne Mordenfeld Abstract Objective: The purpose of the present study was to histologically and histomorphometrically evaluate the long-term tissue response to deproteinized bovine bone (DPBB) particles used in association with autogenous bone and to compare particle size after 6 months and 11 years, in the same patients, in order to determine possible resorption. Material and methods: Twenty consecutive patients (14 women and six men) with a mean age of 62 years (range 48,69 years) with severe atrophy of the posterior maxilla were included in this study. Thirty maxillary sinuses with <5 mm subantral alveolar bone were augmented with a mixture of 80% DPBB and 20% autogenous bone. Eleven years (mean 11.5 years) after augmentation, biopsies were taken from the grafted areas of the 11 patients who volunteered to participate in this new surgical intervention. The following histomorphometrical measurements were performed in these specimens: total bone area in percentage, total area of the DPBB, total area of marrow space, the degree of DPBB,bone contact (percentage of the total surface length for each particle), the length of all DPBB particles and the area of all DPBB particles. The length and the area of the particles were compared with samples harvested from the same patients at 6 months (nine samples) and pristine particles from the manufacturer. Results: The biopsies consisted of 44.7±16.9% lamellar bone, 38±16.9% marrow space and 17.3±13.2% DPBB. The degree of DPBB to bone contact was 61.5±34%. There were no statistically significant differences between the length and area of the particles after 11 years compared with those measured after 6 months in the same patients or to pristine particles from the manufacturer. Conclusion: DPBB particles were found to be well integrated in lamellar bone, after sinus floor augmentation in humans, showing no significant changes in particle size after 11 years. To cite this article: Mordenfeld A, Hallman M, Johansson CB, Albrektsson T. Histological and histomorphometrical analyses of biopsies harvested 11 years after maxillary sinus floor augmentation with deproteinized bovine and autogenous bone. Clin. Oral Impl. Res. 21, 2010; 961,970. doi: 10.1111/j.1600-0501.2010.01939.x [source] The use of autologous venous blood for maxillary sinus floor augmentation in conjunction with sinus membrane elevation: an experimental studyCLINICAL ORAL IMPLANTS RESEARCH, Issue 3 2010Ha-Rang Kim Abstract Background: There have been reports of successful bone formation with sinus floor elevation induced by simply elevating the maxillary sinus membrane and filling the sinus cavity with a blood clot. Purpose: We investigated the feasibility of maxillary sinus floor augmentation using the patient's own venous blood in conjunction with a sinus membrane elevation procedure. Materials and methods: An implant that protruded 8 mm into the maxillary sinus after sinus membrane elevation was placed in the maxillary sinus of six adult female mongrel dogs. The resulting space between the membrane and the sinus floor was filled with autologous venous blood retrieved from each dog. The implants were left in place for 6 months. Results: During the experimental period, the created space collapsed and the sinus membrane fell down onto the implant. A small amount of new bone formation occurred in the space created by the collapsed membrane. The average height of newly formed bone around the implants in the sinus was 2.7±0.7 mm on the buccal side and 0.6±0.3 mm on the palatal side. Conclusion: The results of this pilot study indicate that blood clots do not have sufficient integrity to enable the sinus membrane to remain in an elevated position for therapeutically effective periods of time. Accordingly, it is recommended that this method be used only when a small aount of new bone formation is necessary around implants in the maxillary sinus cavity. To cite this article: Kim H-R, Choi B-H, Xuan F, Jeong S-M. The use of autologous venous blood for maxillary sinus floor augmentation in conjunction with sinus membrane elevation: an experimental study. Clin. Oral Impl. Res. 21, 2010; 346,349. doi: 10.1111/j.1600-0501.2009.01855.x [source] Back-scattered electron imaging and elemental microanalysis of retrieved bone tissue following maxillary sinus floor augmentation with calcium sulphateCLINICAL ORAL IMPLANTS RESEARCH, Issue 8 2008Nicola Slater Abstract Objectives: To investigate the presence and composition of residual bone graft substitute material in bone biopsies from the maxillary sinus of human subjects, following augmentation with calcium sulphate (CaS). Material and methods: Bone cores were harvested from the maxillary sinus of patients who had undergone a sinus lift procedure using CaS G170 granules 4 months after the initial surgery. Samples from seven patients, which contained residual biomaterial particles, were examined by field emission scanning electron microscopy and energy dispersive X-ray spectroscopy was used to determine the composition of the remaining bone graft substitute material. Results: Residual graft material occurred in isolated areas surrounded by bone and consisted of individual particles up to 1 mm in length and smaller spherical granules. On the basis of 187 separate point analyses, the residual material was divided into three categories (A, B and C) consisting of: A, mainly CaS (S/P atomic% ratio ,2.41); B, a heterogeneous mixture of CaS and calcium phosphate (S/P=0.11,2.4) and C, mainly calcium phosphate (S/P,0.11; C), which had a mean Ca : P ratio of 1.63±0.2, consistent with Ca-deficient hydroxyapatite. Linescans and elemental maps showed that type C material was present in areas which appeared dense and surrounded, or were adjacent to, more granular CaS-containing material, and also occurred as spherical particles. The latter could be disintegrating calcium phosphate in the final stages of the resorption process. Conclusions: CaS resorption in the human maxillary sinus is accompanied by CaP precipitation which may contribute to its biocompatibility and rapid replacement by bone. [source] | ||||||||||