Home About us Contact
|
Home About us Contact | ||
|
|
||
MFI
Selected AbstractsWhen monocytes and platelets compete: The effect of platelet count on the flow cytometric measurement of monocyte CD36,CYTOMETRY, Issue 2 2010W.H. Dzik Abstract Background: Flow cytometric measurement of monocyte surface CD36 is relevant to several conditions including diabetes, cardiovascular disease, lipid disorders, platelet isoimmunization, and susceptibility to P falciparum malaria. CD36 is also strongly expressed on platelets where it is also known as platelet glycoprotein IV. Methods: Whole blood samples, containing identical monocyte concentrations, were adjusted to contain platelets ranging from 20,000/uL to 600,000/uL, were stained with fluorescent-labeled anti-CD36, and analyzed by flow cytometry. Results: CD36 median fluorescent intensity (MFI) observed on monocytes decreased as the platelet concentration in the sample increased with more than a 50% decline in monocyte MFI over the normal range of platelet values. The effect was not abolished by using larger volumes of monoclonal antibody and was observed with different clones of reagent anti-CD36. The findings were most consistent with competition by platelets for the CD36 reagent. Similar findings were observed with antibody to class I HLA. Under defined assay conditions, monocyte CD36 MFI declined with rising platelet concentration in a predictable fashion following an inverse linear relationship. Conclusions: Measurement of CD36 expression on monocytes by flow cytometry in whole blood samples is affected by the sample platelet count. When comparing the monocyte CD36 expression among different individuals, our approach can be used to adjust measured monocyte CD36 expression for the effect of the platelet concentration in the sample. Competition by platelets for monoclonal reagents may occur in other settings when whole blood assays are used and when the target antigen is strongly expressed on both platelets and leukocytes. © 2009 Clinical Cytometry Society [source] Flow cytometric evaluation of CD38 expression assists in distinguishing follicular hyperplasia from follicular lymphoma,CYTOMETRY, Issue 5 2009Kristin Mantei Abstract The distinction of follicular lymphoma (FL) from reactive follicular hyperplasia (FH) can be a diagnostic challenge in flow cytometry. In this study, the median fluorescent intensity (MFI) of CD38 as assessed by flow cytometry on B and T cell subpopulations in 102 lymph nodes specimens with histopathologically confirmed FL was compared with 55 cases of FH. The MFI of CD38 was highly significantly reduced in the neoplastic B cells in FL when compared with the reactive germinal center B cells in FH (P < 1.0E-16). The MFI of CD38 did not differ between the non-neoplastic B-cells in FL and nongerminal center B-cells in FH (P = 0.14) or between T-cells and non-neoplastic B-cells in FL (P = 0.63). A marginal increase in the MFI of CD38 was seen for T cells in FL compared with FH (P = 0.04). An increased difference in the MFI of CD38 was identified for T-cells compared with nongerminal center B-cells in FH (P = 0.005). No difference in CD38 expression was seen between Grades 1, 2, or 3 FL. The study also confirmed increased expression of CD10 (P < 1.0E-9), decreased CD19 (P < 1.0E-22), and CD20 (P < 1.0E-16) in FL in comparison with FH, as has been previously reported. This study identified decreased CD38 as a common finding in FL in comparison with FH and provides an additional tool to help differentiate FL from FH by flow cytometry. © 2009 Clinical Cytometry Society [source] Overexpression of CD7 in classical Hodgkin lymphoma-infiltrating T lymphocytes,CYTOMETRY, Issue 3 2009Adam C. Seegmiller Abstract Background: Diagnosis of Hodgkin lymphoma (HL) is sometimes complicated by the scarcity of neoplastic cells in a reactive inflammatory background. Immunophenotyping by flow cytometry (FC) has not played a significant role in HL diagnosis because of its consistent failure to identify these neoplastic cells. However, HL-infiltrating T cells have been shown to play a role in HL pathogenesis. This study characterizes the FC immunophenotype of these T lymphocytes to determine whether they can be used to assist in the diagnosis of HL. Methods: Cell suspensions from 76 lymph nodes involved by HL and 156 lymph nodes with reactive lymphadenopathy (LAD) were analyzed by flow cytometry to assess the expression of T-cell antigens. Results: The CD4:CD8 ratio and CD7 expression in both CD4(+) and CD8(+) T cells are increased in HL compared with reactive lymph nodes and there are significant differences between these features in different subtypes of HL. However, only the expression of CD7 in CD4(+) T cells distinguishes between HL and reactive LAD. This is especially true for classical HL in younger patients. Using a CD7 mean fluorescence intensity (MFI) cutoff value generated by this data, 37/47 FNA specimens were correctly diagnosed. Conclusions: There are significant differences in the immunophenotypes of HL-infiltrating T cells. Of these, the CD7 expression in CD4(+) T cells discriminates between HL and reactive LAD, suggesting that this could be a useful and practical adjunctive tool in the diagnosis of HL. It may also further our understanding of the pathophysiology of this disease. © 2008 Clinical Cytometry Society [source] Determination of genomic copy number with quantitative microsphere hybridization,,HUMAN MUTATION, Issue 4 2006Heather L. Newkirk Abstract We developed a novel quantitative microsphere suspension hybridization (QMH) assay for determination of genomic copy number by flow cytometry. Single copy (sc) products ranging in length from 62 to 2,304 nucleotides [Rogan et al., 2001; Knoll and Rogan, 2004] from ABL1 (chromosome 9q34), TEKT3 (17p12), PMP22 (17p12), and HOXB1 (17q21) were conjugated to spectrally distinct polystyrene microspheres. These conjugated probes were used in multiplex hybridization to detect homologous target sequences in biotinylated genomic DNA extracted from fixed cell pellets obtained for cytogenetic studies. Hybridized targets were bound to phycoerythrin-labeled streptavidin; then the spectral emissions of both target and conjugated microsphere were codetected by flow cytometry. Prior amplification of locus-specific target DNA was not required because sc probes provide adequate specificity and sensitivity for accurate copy number determination. Copy number differences were distinguishable by comparing the mean fluorescence intensities (MFI) of test probes with a biallelic reference probe in genomic DNA of patient samples and abnormal cell lines. Concerted 5, ABL1 deletions in patient samples with a chromosome 9;22 translocation and chronic myelogenous leukemia were confirmed by comparison of the mean fluorescence intensities of ABL1 test probes with a HOXB1 reference probe. The relative intensities of the ABL1 probes were reduced to 0.59±0.02 &!ndash;fold in three different deletion patients and increased 1.42±0.01 &!ndash;fold in three trisomic 9 cell lines. TEKT3 and PMP22 probes detected proportionate copy number increases in five patients with Charcot-Marie-Tooth Type 1a disease and chromosome 17p12 duplications. Thus, the assay is capable of distinguishing one allele and three alleles from a biallelic reference sequence, regardless of chromosomal context. Hum Mutat 27(4), 376,386, 2006. © 2006 Wiley-Liss, Inc. [source] Evaluation of eosin-5-maleimide flow cytometric test in diagnosis of hereditary spherocytosisINTERNATIONAL JOURNAL OF LABORATORY HEMATOLOGY, Issue 1p2 2010R. KAR Summary A flow cytometry-based test using eosin-5-maleimide (EMA) dye was used for diagnosis of hereditary spherocytosis (HS). The mean fluorescence intensiy (MFI) of EMA tagged erythrocytes is lower in HS than that in other hemolytic and nonhemolytic anemias. We enrolled 114 subjects comprising 20 confirmed HS, 20 suspected HS/hemolytic anemia (HA), 20 normal controls, 20 other hemolytic anemias [13 autoimmune hemolytic anemia, three congenital dyserythropoietic anemia (CDA), one pyruvate kinase deficiency, two microangiopathic hemolytic anemia], 18 microcytic anemia and 16 macrocytic anemia cases. All samples were subjected to flow cytometry as per standard protocol. The mean MFI of normal control subjects was 11 861.5 (SD 883.5) and of confirmed HS was 7949.3 (SD 1304.1). Using this test, of 20 patients suspected to be HS/HA but with no confirmatory diagnosis, eight patients were diagnosed as HS. Using logistic regression analysis, the optimum cut-off MFI value between HS and normal controls was 10126. The area under the ROC curve was 0.99. The statistical significance of MFI values was obtained by t -test or Wilcoxon rank sum test as applicable. Compared with normal controls, the MFI values in HS were lower and in megaloblastic anemia were higher which was statistically highly significant (P < 0.01), and the MFI values in CDA were lower which was statistically significant (P < 0.05). False-positive values were obtained in three cases of AIHA and two cases of CDA. The sensitivity and specificity was 96.4% and 94.2% respectively. The EMA-based flow cytometry test is a highly sensitive and specific method for the diagnosis of HS. [source] Utility of reticulocyte maturation parameters in the differential diagnosis of macrocytic anemiasINTERNATIONAL JOURNAL OF LABORATORY HEMATOLOGY, Issue 5 2003A. Torres Gomez Summary The aim of this study was to test the clinical utility of reticulocyte maturation parameters in the differential diagnosis of macrocytic anemias. Using an automated reticulocyte counter, we analyzed immature reticulocyte fraction (IRF), mean reticulocyte volume (MRV) and mean fluorescence index (MFI) in peripheral blood samples from healthy donors (n = 30), patients diagnosed with myelodysplastic syndromes (MDS, n = 35), with megaloblastic anemia (MA, n = 10) and with non-megaloblastic macrocytic anemias (NMMA, n = 30). Macrocytic anemias due to ineffective erythropoiesis (MA and MDS) showed reticulocytes skewed to a more immature fraction. Therefore, they have a larger volume and a greater RNA content than healthy controls. Interestingly, reticulocytes in both low and high risk MDS are significantly larger (127.3 vs. 118.3 fl, P < 0.01) and have a greater RNA content (MFI 20.5 vs. 12.9, P < 0.01 and IRF 22.5 vs. 9.1%, P < 0.01) than NMMA patients. We conclude that measurement of reticulocyte maturation parameters may be a very useful tool in the differential diagnosis of macrocytic anemia. The presence of extremely high values of IRF (>16%), MFI (>18) and MRV (>129 fl), makes the diagnosis of NMMA very unlikely. An underlying MDS should, therefore, be sought. [source] Flammability and mechanical properties of Al(OH)3 and BaSO4 filled polypropyleneJOURNAL OF APPLIED POLYMER SCIENCE, Issue 5 2010S. Tan Abstract The flammability and mechanical properties of Al(OH)3/BaSO4/polypropylene (PP) composites were investigated. The flow, morphological, and thermal properties were also analyzed by melt flow index (MFI), Scanning electron microscopy (SEM), and Differential scanning calorimeter (DSC) studies, respectively. Total filler amount was fixed at 30 wt % to optimize physical characteristics of the composites. In addition to the flame retardant filler Al(OH)3, BaSO4 was used to balance the reduction in impact strength at high filler loadings. Substantial improvement in mechanical properties was achieved for 20 wt % Al(OH)3 (i.e., 10 wt % BaSO4) composition while maximum flammability resistance was obtained for 30 wt % Al(OH)3 composite. SEM studies showed that the presence of aggregated Al(OH)3 particles led to low interfacial adhesion between them and PP matrix ending up with decreased mechanical strength. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010 [source] Simple method to determine flow characteristics of injectable hydrogelsJOURNAL OF APPLIED POLYMER SCIENCE, Issue 1 2010Sundar Babu Nadarajan Abstract This article presents a simple inexpensive method to measure flow and viscoelastic properties of calcium alginate hydrogels or gel solutions and is particularly suitable for quality control in small laboratory settings. This method can be considered an extension of the Melt Flow Index (MFI) method, which is routinely used in the polymer industry to indirectly determine the molecular weight of polymers. Results of alginate gels at various crosslinking densities obtained with this new test are compared to complex viscosity data obtained from a standard cone and plate rheometer, and demonstrate very good correlation. A mathematical model describing the apparent viscosity of the alginate gels in this test has also been developed. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010 [source] Toughening of recycled polystyrene used for TV backsetJOURNAL OF APPLIED POLYMER SCIENCE, Issue 6 2008Xiaoting Fu Abstract The recycled polystyrene (rPS) was toughened with ethylene-octylene copolymer thermoplastic elastomer (POE) and high-density polyethylene (HDPE) with various melt flow index (MFI), compatibilized by styrene-butadiene-styrene copolymer (SBS) to enhance the toughness of rPS for use as TV backset. The rPS/POE binary blends exhibited an increased impact strength with 5,10 wt % POE content followed by a decrease with the POE content up to 20 wt %, which could be due to poor compatibility between POE and rPS. For rPS/POE/SBS ternary blends with 20 wt % of POE content, the impact strength increased dramatically and a sharp brittle-ductile transition was observed as the SBS content was around 3,5 wt %. Rheological study indicated a possible formation of network structure by adding of SBS, which could be a new mechanism for rPS toughening. In rPS/POE/HDPE/SBS (70/20/5/5) quaternary blends, a fibril-like structure was observed as the molecular weight of HDPE was higher (with lower MFI). The presence of HDPE fibers in the blends could not enhance the network structure, but could stop the crack propagation during fracture process, resulting in a further increase of the toughness. The prepared quaternary blend showed an impact strength of 9.3 kJ/m2 and a tensile strength of 25 MPa, which can be well used for TV backset to substitute HIPS because this system is economical and environmental friendly. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008 [source] Mechanical, flow, and morphological properties of talc- and kaolin-filled polypropylene hybrid compositesJOURNAL OF APPLIED POLYMER SCIENCE, Issue 1 2007M. B. Abu Bakar Abstract Polypropylene (PP) hybrid composites have been produced by compounding two types of mineral fillers, viz., talc and kaolin with PP copolymer using a twin screw extruder. The PP hybrid composite was injection-molded into dumbbell specimen for tensile, flexural, and impact properties characterizations. MFI and SEM studies were used to characterize the flow and morphological properties of the PP hybrid composites. The result shows that most of the hybrid composites showed a significant decrease in flow, tensile, flexural, and impact properties compared with the single filler-filled PP composites. However, a hybridization effect was seen for the PPT20K10 hybrid composites, through the synergistic coalescence of positive characteristics from 20 wt % of talc and 10 wt % of kaolin. This hybrid formulation have given an economically advantageous material with the mechanical properties (tensile, flexural, and impact) comparable to those of the talc-filled PP composites. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 434,441, 2007 [source] Immunosuppression with FK506 Increases Bone Induction in Demineralized Isogeneic and Xenogeneic Bone Matrix in the RatJOURNAL OF BONE AND MINERAL RESEARCH, Issue 9 2000Dr. Gregor Voggenreiter Abstract The aim of the present study was to investigate a systemic induction of bone formation in rats by immunosuppression with FK506 (1 mg/kg body weight intraperitoneally [ip]) in a model of osteoinduction of isogeneic and xenogeneic demineralized bone matrix (DBM) for a period of 28 days. In particular, alterations of in vitro cytokine synthesis and changes of lymphocyte subsets were studied. DBM was implanted intramuscularly in the abdominal wall of Lewis rats (seven per group). Blood was sampled on days ,7, 0, 7, and 28 for determination of in vitro tumor necrosis factor , (TNF-,) synthesis and lymphocyte subsets by flow cytometry (CD3+, CD4+, CD8+, CD45+, ED9+, and Ia+ antibodies). Ossicles of de novo formed bone and the tibias were removed on day 28 after double tetracycline labeling for histomorphometric analysis. Immunosuppression with FK506 significantly decreased lipopolysaccharide (LPS)-stimulated in vitro cytokine synthesis after 7 days and 28 days (p < 0.05). Compared with control animals FK506 treatment significantly increased the volume of induced bone in isogeneic (2.1 ± 0.3 mm3 vs. 10.8 ± 0.9 mm3) and xenogeneic (0 mm3 vs. 4.7 ± 0.8 mm3) DBM. Bone histomorphometry of the tibias revealed that immunosuppression increased both bone formation and bone resorption, accompanied by a significant reduction in the relative trabecular area (Tb.Ar). FK506 caused a decrease in the counts of CD8+ T cells probably because of destruction or dislocation of these cells. This suggests that the amount of CD8+ cells and the degree of T cell activation in terms of mean fluorescence intensity (MFI) may be associated with bone metabolism. In support of this, statistical analysis revealed a significant positive correlation between parameters of bone formation as well as bone resorption and the CD4+/CD8+ ratio. There was a significant negative correlation between parameters of remodeling of the metaphysis of the tibia and induced bone volume (BV), respectively, and MFI values of CD3+/Ia+ cells. These findings suggest an important role of T lymphocytes in bone formation and bone resorption in vivo. FK506 caused a marked increase of bone formation in DBM. However, the conclusion that immunosuppression increases fracture healing warrants further investigation. [source] Quantification and characterization of subvisible proteinaceous particles in opalescent mAb Formulations Using Micro-Flow ImagingJOURNAL OF PHARMACEUTICAL SCIENCES, Issue 6 2010Deepak K. Sharma Abstract Micro-flow imaging (MFIÔ) has been shown to be more sensitive than light obscuration (LO) methods for measuring subvisible proteinaceous particles in protein formulations. Given the potential challenges in detecting particulates in opalescent mAb formulations, the accuracy of MFI to size and count particles in opalescent solutions was investigated and compared to LO and membrane microscopy methods. Proteinaceous monoclonal antibody (mAb) particles, generated either by chemical denaturation or agitation stress, polystyrene and glass particles were used as model systems for measurements in opalescent mAb solutions. The sizing and counting accuracies of MFI were unaffected by the opalescence of the medium. Using glass particles as a model system for proteinaceous particles, MFI was able to detect relatively low particle concentrations (,10/mL) in opalescent solutions. MFI showed excellent linearity (R2,=,0.9969) for quantifying proteinaceous particles in opalescent solutions over a wide range of particle concentrations (,20,160,000/mL). Analyses of MFI particle image intensities revealed significant differences in the transparency of proteinaceous particles as a function of their size and mode of generation. LO method significantly underestimated proteinaceous particles, particularly those in the 2,10,µm size range. The less opaque proteinaceous particles were relatively more underestimated by the LO method in opalescent solutions. © 2010 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 99: 2628,2642, 2010 [source] Quantitation of protein particles in parenteral solutions using micro-flow imagingJOURNAL OF PHARMACEUTICAL SCIENCES, Issue 9 2009Chi-Ting Huang Abstract The U.S. and European Pharmacopeias require subvisible (,10 and ,25 µm) and visible particulate testing of therapeutics to ensure their safety and suitability for clinical use. The objective of this article is to compare the sizing and counting accuracies of light obscuration, which is the standard technique used to measure subvisible particulate matter, and Micro-Flow Imaging (MFIÔ), a new imaging-based technology. An immunoconjugate was selected as the model protein for this study since it could be induced to form particulate matter in PBS. Light obscuration was performed as described in USP chapter <788> while MFI measurements were conducted per the manufacturer's procedures. The two techniques yielded similar results when polystyrene standards were analyzed. However, the MFI measurements indicated the presence of significantly more particles in the protein-containing solution compared to the light obscuration measurements. The presence of nonspherical protein particles as well as particles that possess a refractive index similar to the solvent that they are in appear to be detected by MFI, but not by light obscuration, leading to the difference in the results. Imaging-based technologies could aid in developing formulations and processes that would minimize the formation of protein particulates. © 2008 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 98:3058,3071, 2009 [source] Canine Digital Tumors: A Veterinary Cooperative Oncology Group Retrospective Study of 64 DogsJOURNAL OF VETERINARY INTERNAL MEDICINE, Issue 5 2005Carolyn J. Henry We compared clinical characteristics and outcomes for dogs with various digital tumors. Medical records and histology specimens of affected dogs from 9 veterinary institutions were reviewed. Risk factors examined included age, weight, sex, tumor site (hindlimb or forelimb), local tumor (T) stage, metastases, tumor type, and treatment modality. The Kaplan-Meier product limit method was used to determine the effect of postulated risk factors on local disease-free interval (LDFI), metastasis-free interval (MFI), and survival time (ST). Outcomes were thought to differ significantly between groups when P± .003. Sixty-four dogs were included. Squamous cell carcinoma (SCC) accounted for 33 (51.6%) of the tumors. Three dogs presented with or developed multiple digital SCC. Other diagnoses included malignant melanoma (MM) (n = 10; 15.6%), osteosarcoma (OSA) (n = 4; 6.3%), hemangiopericytoma (n = 3; 4.7%), benign soft tissue tumors (n = 5; 7.8%), and malignant soft tissue tumors (n = 9; 14%). Fourteen dogs with malignancies had black hair coats, including 5 of the 10 dogs with MM. Surgery was the most common treatment and, regardless of the procedure, had a positive impact on survival. None of the patient variables assessed, including age, sex, tumor type, site, and stage, had a significant impact on ST. Both LDFI and MFI were negatively affected by higher T stage, but not by type of malignancy. Although metastasis at diagnosis correlated with a shorter LDFI, it did not have a significant impact on ST On the basis of these findings, early surgical intervention is advised for the treatment of dogs with digital tumors, regardless of tumor type or the presence of metastatic disease. [source] Studies on rheology and morphology of POE/PP thermoplastic elastomer dynamically crosslinked by peroxideJOURNAL OF VINYL & ADDITIVE TECHNOLOGY, Issue 2 2008Bo Yuan An ethylene-octene copolymer (POE)/polypropylene (PP) thermoplastic elastomer was prepared through dynamically crosslinking by 2,5-dimethyl-2,5-dilbuty (Peroxy) hexane (DHBP). The effects of DHBP concentration, POE/PP ratio, melt flow index (MFI) of PP, and mixer rotation on rheology and morphology of the thermoplastic elastomer were studied. The results showed that with increasing DHBP concentration or POE content, the size of crosslinked particles as well as the melt viscosity increased. Furthermore, agglomerates or a network structure formed as the size of crosslinked particles increased. The melt viscosity also increased as MFI of PP decreased, while the size of crosslinked particles decreased under the same condition. Research on the morphology of dynamically crosslinked POE/PP thermoplastic elastomer flowing through a capillary rheometer at different shear rates show that the reprocessing had little effect on the morphology of dynamically crosslinked elastomer. J. VINYL ADDIT. TECHNOL., 2008. © 2008 Society of Plastics Engineers. [source] Improving the Processing Ability and Mechanical Strength of Starch/Poly(vinyl alcohol) Blends through Plasma and Acid ModificationMACROMOLECULAR SYMPOSIA, Issue 1 2008Sung-Yeng Yang Abstract Summary: In this study, maleic anhydride (MA), and citric acid (CA) used as the processing additive and plasma treatment to improve the processing ability and mechanical strength of biodegradable starch/poly (vinyl alcohol) (PVA) blends were studied. The melt flow index (MFI) of starch/ glycerol/PVA (300g/60g/80g) blend was increased from 2.3g/10min to 32.7g/10min by adding 3g of MA and to 130 g/10min by adding MA and plasma treatment. The tensile strength of starch/glycerol/PVA blend increased from 3.48 to 6.21 MPa by adding 1.5g of MA and 1.5g of CA, while it increased to 6.26 MPa by plasma treatment. Esterification reaction which was evidenced by FTIR has been showed to improve the compatibility between starch and PVA when MA was dissolved into glycerol and glycerol grafted onto plasma pretreatment PVA. Thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) imaging were used to study the morphology of extruded blends. [source] Novel Approach for Clustering Zeolite Crystal StructuresMOLECULAR INFORMATICS, Issue 4 2010M. Lach-hab Abstract Informatics approaches play an increasingly important role in the design of new materials. In this work we apply unsupervised statistical learning for identifying four framework-type attractors of zeolite crystals in which several of the zeolite framework types are grouped together. Zeolites belonging to these super-classes manifest important topological, chemical and physical similarities. The zeolites form clusters located around four core framework types: LTA, FAU, MFI and the combination of EDI, HEU, LTL and LAU. Clustering is performed in a 9-dimensional space of attributes that reflect topological, chemical and physical properties for each individual zeolite crystalline structure. The implemented machine learning approach relies on hierarchical top-down clustering approach and the expectation maximization method. The model is trained and tested on ten partially independent data sets from the FIZ/NIST Inorganic Crystal Structure Database [source] Measuring fatigue among women with Sjögren's syndrome or rheumatoid arthritis: A comparison of the Profile of Fatigue (ProF) and the Multidimensional Fatigue Inventory (MFI)MUSCULOSKELETAL CARE, Issue 1 2008C. E. Goodchild BSc MSc Abstract Background:,Fatigue is common in both Sjögren's syndrome (SS) and rheumatoid arthritis (RA) and can restrict functioning. Aims:,We tested the convergent validity of the Profile of Fatigue (ProF) using the Multidimensional Fatigue Inventory (MFI) in SS and RA. Methods:,The 16-item ProF and the 20-item MFI were completed by 82 White-British women aged 35,79 years (mean 60.4 years). Thirty-four had been diagnosed with SS for a mean of 7.0 years and 48 had been diagnosed with RA for a mean of 14.5 years. The ProF measures four somatic facets of fatigue and two mental facets; the MFI contains one mental and four somatic facets. The structures of the items from both measures were tested by principal component factor analysis using varimax rotation. Results:,No significant differences in fatigue were found between the women with SS or RA. Five factors explained a total of 76% of the variance of the MFI; six factors explained 94% of the variance of the ProF. Mental fatigue items from both questionnaires loaded onto separate factors from somatic fatigue items; the two original facets of mental fatigue in the ProF were replicated. The four somatic fatigue facets of the ProF were generally replicated but the somatic facets of the MFI did not replicate as clearly. Equivalent facets correlated well between the two questionnaires (r , 0.65). Conclusions:,Both the ProF and the MFI distinguish between somatic and mental fatigue in SS and RA but the ProF appears better at resolving somatic facets of fatigue. Copyright © 2007 John Wiley & Sons, Ltd. [source] Modified atmosphere packaging affects lipid oxidation, myofibrillar fragmentation index and eating quality of beefPACKAGING TECHNOLOGY AND SCIENCE, Issue 2 2009Ina Clausen Abstract The objective of this study was to evaluate the effects of different modified atmosphere packaging (MAP) systems applied during ageing and retail display on the quality of beef longissimus dorsi. The quality of the steaks was measured by sensory analysis, thiobarbituric acid-reactive substances (TBARS), myofibrillar fragmentation index (MFI), protein oxidation, weight loss, cooking loss and vitamin E content. The study included 11 different packaging systems investigated in two separate trials, using O2, CO2, N2 gas and vacuum in combination or alone during ageing and retail display. In some systems, loins were sliced into steaks before packaging, and in other systems, loins were vacuum packed and aged for 14,18 days, and thereafter were sliced and repacked in different atmospheres. Systems including high O2 MAP resulted in a large increase in warmed-over flavour and in TBARS as well as a decrease in juiciness, tenderness and vitamin E content, compared to anaerobic systems. Also, MFI was lower in high O2 MAP steaks, and an increase in protein oxidation was seen, suggesting that the decrease in meat tenderness was due to reduced proteolysis and/or protein oxidation. In addition, the cooked steaks of high O2 MAP looked well done, although the internal temperature was only 62°C, indicating premature browning. Ageing of steaks in N2 did not affect any measured parameter compared to vacuum thermoforming packed muscle. Steaks stored in vacuum skin pack for 20 days were less tender than steaks stored in 100% N2 for 18 days followed by 2 days in atmospheric air. In conclusion, packaging in high O2 concentrations compromises several aspects of meat quality. Copyright © 2008 John Wiley & Sons, Ltd. [source] Processability, morphology and mechanical properties of glass fiber reinforced poly(ether sulfone) modified by a liquid crystalline copolyesterPOLYMER COMPOSITES, Issue 6 2003M. García Ternary composites based on glass fiber reinforced polyethersulfone (gPES) modified by a liquid crystalline copolyester (R5) were obtained by injection molding at different nozzle temperatures and at LCP contents up to 20%. The blends showed two pure amorphous phases. The ability of R5 to improve processing was seen mainly in the increase in the MFI of the blends on 5% LCP addition, which was more than 75% and 16% with respect to that of pure gPES and PES, respectively. The best processing temperature appeared to be 330°C, as it led to the maximum skin fibrillation and provided both the best small strain and fracture mechanical properties. The blend processed at 330°C with 5% R5 showed the best balance of properties because, besides the highest relative processability increase, it led to maximum values in all mechanical properties measured. This was due to both the overall fibrillation of the skin and to its having the highest ductility. [source] Melt rheology of HDPE/EVA blends: The effects of blend ratio, compatibilization, and dynamic vulcanizationPOLYMER ENGINEERING & SCIENCE, Issue 4 2010Biju John The melt rheological behavior of high-density polyethylene (HDPE)/ethylene vinyl acetate (EVA) blends has been examined with reference to the effect of blend ratio, shear stress, and temperature. The HDPE/EVA blends exhibit pseudoplastic behavior, and the observed rheological behavior of the blends was correlated with the extrudate morphology. The experimental values of the viscosity were compared with the theoretical models. The effect of maleic- and phenolic-modified PE compatibilizers on the viscosity of H70 blend was analyzed and found that compatibilization did not significantly increase the viscosity. The effect of dynamic vulcanization and temperature on the viscosity was also analyzed. The activation energy of the system decreased with increase in EVA content in the system. The phase continuity and phase inversion points of the blends were theoretically predicted and compared with the experimental values. The melt flow index (MFI) values of the blends were also determined and found that the MFI values decreased with increase in EVA content in the system. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers [source] Morphology and mechanical properties of impact modified polypropylene blendsPOLYMER ENGINEERING & SCIENCE, Issue 11 2008Nathan Tortorella Isotactic polypropylene (PP) has been reactively blended with various grades of an ethylene,octene copolymer (EOC) in a twin-screw extruder. Free radical polymerization of styrene and a multifunctional acrylate during melt extrusion has resulted in an enhancement of mechanical properties over the binary blend. The reactive blend exhibits a notched Izod impact strength over 12 times that of pure polypropylene and greater than double the performance of the binary blend. Electron microscopy shows that by grafting onto the polymers, elastomer particle size and interparticle distance decrease, while particle shape becomes less spherical. The acrylate is crucial to achieve superior performance, as infrared spectra correlate an increase in graft yield to improvements in stress,strain behavior and impact strength. In addition, melt flow index (MFI) and melt strength data indicate a reduction in unwanted side reactions of polypropylene and the presence of long-chain branching. Dynamic-mechanical analysis reveals that the reaction promotes miscibility between polypropylene and the EOC and reduces molecular mobility at their glass-transition temperatures. Mechanical properties, graft yield, and MFI are shown to be highly dependent upon the elastomer's concentration, density, and molecular weight, initiator and monomer concentration, as well as processing temperature. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers [source] Effect of photo-initiators on melt degradation of polypropylene and starch-filled polymer,POLYMER INTERNATIONAL, Issue 10 2002Rouhallah Bagheri Abstract Six series of the processed polypropylene (pp) samples containing 0.25,1,wt% photo-initiators (PIs, four aromatic carbonyl, two ferric compounds) and also a series of 6,wt% corn-starch-filled pp containing 0.5,wt% of each PI, were prepared using a mixer in a closed system at 180,°C for 5,min. The melt flow index (MFI) and apparent viscosity measurments of the processed pp,PI samples showed a large increase in MFI/or decrease in apparent viscosity at 0.25,wt% of the PIs. Further increase in the amounts of PIs led these properties to reach a constant value at 0.5,wt% of the PIs. The presence of corn starch in the samples corresponded to a much lower increase in the MFI or decrease in the apparent viscosity. Ferric stearate and Irgacure 184 amoung the PIs showed the highest and lowest melt degradation effects, respectively. Carbonyl measurments of all the film samples showed good correlations between chemical changes in the pp structure and variations in the flow properties during processing. UV absorption of the films also evidenced the presence of the aromatic carbonyl PIs in the pp matrix after melt processing. © 2002 Society of Chemical Industry [source] Mechanical properties and thermal analysis of low-density polyethylene,+,polypropylene blends with dialkyl peroxidePOLYMERS FOR ADVANCED TECHNOLOGIES, Issue 4 2010Kamil, irin Abstract Polypropylene,+,low density polyethylene (PP,+,LDPE) blends involving 0, 25, 50, 75 and 100,wt% of PP with dialkyl peroxide (DAP) were prepared by melt blending in a single-screw extruder. The effects of adding dialkyl peroxide on mechanical and thermal properties of PP,+,LDPE blends have been studied. It was found that at lower concentrations of peroxide (e.g., 0,0.08,wt% of dialkyl peroxide) LDPE component is cross-linked and Polypropylene (PP) is degraded in all compositions of PP,+,LDPE blends. Mechanical properties (Tensile strength at break, at yield and elongation at break), Melt flow index (MFI), hardness, Scanning Electron Microscope (SEM) and thermal analyses (DSC) of these blends were examined. Because of serious degradation or cross-linking the mechanical properties and the crystallinty (%) of those products were decreased as a result of increasing peroxide content. Copyright © 2009 John Wiley & Sons, Ltd. [source] Precession electron diffraction 1: multislice simulationACTA CRYSTALLOGRAPHICA SECTION A, Issue 6 2006C. S. Own Precession electron diffraction (PED) is a method that considerably reduces dynamical effects in electron diffraction data, potentially enabling more straightforward solution of structures using the transmission electron microscope. This study focuses upon the characterization of PED data in an effort to improve the understanding of how experimental parameters affect it in order to predict favorable conditions. A method for generating simulated PED data by the multislice method is presented and tested. Data simulated for a wide range of experimental parameters are analyzed and compared to experimental data for the (Ga,In)2SnO4 (GITO) and ZSM-5 zeolite (MFI) systems. Intensity deviations between normalized simulated and kinematical data sets, which are bipolar for dynamical diffraction data, become unipolar for PED data. Three-dimensional difference plots between PED and kinematical data sets show that PED data are most kinematical for small thicknesses, and as thickness increases deviations are minimized by increasing the precession cone semi-angle ,. Lorentz geometry and multibeam dynamical effects explain why the largest deviations cluster about the transmitted beam, and one-dimensional diffraction is pointed out as a strong mechanism for deviation along systematic rows. R factors for the experimental data sets are calculated, demonstrating that PED data are less sensitive to thickness variation. This error metric was also used to determine the experimental specimen thickness. R1 (unrefined) was found to be about 12 and 15% for GITO and MFI, respectively. [source] A Possible Role of CD4+CD25+ T Cells as Well as Transcription Factor Foxp3 in the Dysregulation of Allergic RhinitisTHE LARYNGOSCOPE, Issue 5 2007Geng Xu MD Abstract Background: Allergic rhinitis (AR) is a Th2 predominant disease, and its pathogenic mechanism is still poorly understood. CD4+CD25+ T cells account for approximately 5% to 10% peripheral CD4+ T cells and has been shown to regulate the activation of effector T cells in the periphery. The activity of CD4+CD25+ T cells is associated with the transcription factor Foxp3. The present study aimed to evaluate the possible role of CD4+CD25+ T cells as well as Foxp3 in the pathogenesis of AR. Methods: Nasal tissues and peripheral blood mononuclear cells (PBMCs) were obtained from 17 patients with AR and 11 control subjects. Foxp3 was detected in nasal tissues by immunohistochemistry and real-time reverse transcription-polymerase chain reaction (RT-PCR). CD4+CD25+ T cells and Foxp3 were evaluated in PBMCs by using flow cytometry. Concentrations of interleukin-2 (IL-2) and interferon-, (IFN-,) were measured by enzyme-linked immunosorbent assay (ELISA) in cultured PBMCs in the presence or absence of stimulation with phorbol ester (PMA) and Ionomycin. Results: The numbers of Foxp3+ cells was 129.5 ± 35.6 and 44.2 ± 20.5 cells/mm2 in nasal mucosa of two groups (P < .05). There were less Foxp3+ lymphocytes and decreased Foxp3 mRNA in AR compared with the control (P < .05). The frequencies of the CD4+CD25+ population in PBMCs of two groups were 1.99 ± 0.95% and 3.55 ± 1.27% (P < .05). There was significant difference in the frequencies of the Foxp3+CD4+ CD25+ population (1.81 ± 0.77 vs 3.37 ± 1.04, P < .05) and mean fluorescence intensity (MFI) of Foxp3 (5.93 ± 2.64 vs 11.72 ± 4.29, P < .05) in PBMCs of two groups. After stimulation, the concentrations of IL-2 and IFN-, were 182.72 ± 85.11 pg/mL and 348.94 ± 151.88 pg/mL in PBMCs with AR, while those were 90.6 ± 61.5 pg/mL and 155.64 ± 68.33 pg/mL in controls (P < .05). Conclusion: Our results indicate that CD4+ CD25+ regulatory T cells as well as Foxp3 may play a crucial role in immunological imbalance of AR. These findings suggest that increasing Foxp3 and CD4+CD25+ T cells have the potential to be new therapeutic targets for the treatment of AR. [source] Bortezomib as the Sole Post-Renal Transplantation Desensitization Agent Does Not Decrease Donor-Specific Anti-HLA AntibodiesAMERICAN JOURNAL OF TRANSPLANTATION, Issue 3 2010R. Sberro-Soussan Persistence of donor-specific anti-HLA antibodies (DSA) associated with antibody-mediated graft injuries following kidney transplantation predicts evolution toward chronic humoral rejection and reduced graft survival. Targeting plasma cells, the main antibody-producing cells, with the proteasome inhibitor bortezomib may be a promising desensitization strategy. We evaluated the in vivo efficacy of one cycle of bortezomib (1.3 mg/m2× 4 doses), used as the sole desensitization therapy, in four renal transplant recipients experiencing subacute antibody-mediated rejection with persisting DSA (>2000 [Mean Fluorescence Intensity] MFI). Bortezomib treatment did not significantly decrease DSA MFI within the 150-day posttreatment period in any patient. In addition, antivirus (HBV, VZV and HSV) antibody levels remained stable following treatment suggesting a lack of efficacy on long-lived plasma cells. In conclusion, one cycle of bortezomib alone does not decrease DSA levels in sensitized kidney transplant recipients in the time period studied. These results underscore the need to evaluate this new desensitization agent properly in prospective, randomized and well-controlled studies. [source] Comparison of Combination Plasmapheresis/IVIg/Anti-CD20 Versus High-Dose IVIg in the Treatment of Antibody-Mediated RejectionAMERICAN JOURNAL OF TRANSPLANTATION, Issue 5 2009C. Lefaucheur Different strategies appear to improve the success in treatment of antibody-mediated rejection (AMR), although no one best method has yet emerged. The objective of this study was to compare the efficacy of the combination of Plasmapheresis/intravenous immunoglobulin (IVIg)/anti-CD20-based regimes versus high-dose IVIg alone in the treatment of AMR. Group A (12 patients) was treated with high-dose IVIg between January 2000 and December 2003; group B (12 patients) was treated by Plasmapheresis/IVIg/anti-CD20 between January 2004 and December 2005. Graft survival at 36 months was 91.7% in group B versus 50% in group A (p = 0.02). Donor-specific human leukocyte antigens (DSA) levels detected by Luminex single antigen (Luminex SA) and ELISA, 3 months postrejection are significantly lower in group B than in group A: DSA ELISA class 2 score 6,8 (p = 0.02), DSA mean intensity of fluorescence (MFI) max (p = 0.009) and DSA mean MFI (p = 0.0004). The persistence of elevated DSA levels posttreatment is more frequent in patients with graft loss as compared to those with preserved renal function: score 6,8 on ELISA (p = 0.04); mean MFI (p = 0.00009) and MFImax (p = 0.018). We conclude that: (1) high dose IVIg alone is inferior to Plasmapheresis/IVIg/anti-CD20 as therapy for AMR and (2)DSA postrejection can be quantified using solid phase assays, showing that 3 months after AMR, DSA levels are higher in patients with graft loss. [source] Neutron powder diffraction study of orthorhombic and monoclinic defective silicaliteACTA CRYSTALLOGRAPHICA SECTION B, Issue 1 2000G. Artioli The crystal structure of silicalite (SiO2) with a substantial amount of structural hydroxyl groups [Si(1,x)O(2,4x)(OH)4x, with 0.08 < x < 0.10] has been refined from neutron powder diffraction data measured using the HRPD instrument at the ISIS pulsed neutron source. Powder data were collected on the as-synthesized orthorhombic sample at 298,K, and on the deuterated monoclinic sample at 100,K. Preferential location of Si-atom vacancies was found on four out of 12 independent T sites in the orthorhombic silicalite [Si(6), Si(7), Si(10) and Si(11)], although the H atoms of the substituting hydroxyl groups could not be located because of the low statistical site occupancy on multiple sites. No significant population of D atoms or of Si vacancies was found in the tetrahedral sites of the monoclinic sample. The detected long-range order of adjacent Si atoms in defective orthorhombic [MFI] structures is compatible with a mechanism of Si vacancy clustering and with the model of hydroxyl nests assumed in the literature on the basis of IR spectroscopic evidence. Crystal data: orthorhombic, Pnma, Z = 8, a = 20.0511,(1), b = 19.8757,(1), c = 13.36823,(9),Å, V = 5327.62,(5),Å3, Dx = 1.798,g,cm,3, Mr = 721.01; monoclinic, P21/n, Z = 4, a = 19.8352,(2), b = 20.0903,(2), c = 13.3588,(1),Å, , = 90.892,(1)°, V = 5322.78,(6),Å3, Dx = 1.799,g,cm,3, Mr = 1442.02. [source] Effect of single nucleotide polymorphisms of CAPN1 and CAST genes on meat traits in Nellore beef cattle (Bos indicus) and in their crosses with Bos taurusANIMAL GENETICS, Issue 4 2009R. A. Curi Summary The objectives of this work were to study the segregation of single nucleotide polymorphisms of the calpain 1, large subunit (CAPN1) and calpastatin (CAST) genes in Nellore (Bos indicus) and Nellore ×Bos taurus beef cattle, as well as to evaluate their effects on meat traits. For this, 300 animals, including 114 Nellore, 67 Angus × Nellore, 44 Rubia Gallega × Nellore, 41 Canchim, 19 Brangus three-way crosses and 15 Braunvieh three-way crosses, were genotyped for the CAPN4751 [AF_248054.2:g.6545C>T (GenBank accession AF248054.2)] and CAST/DdeI [AF_159246.1:g.2959A>G (GenBank accession AF159246.1)] polymorphisms and phenotyped for Ribeye Area, Backfat Thickness, Intramuscular Fat, Shear Force (SF) and Myofibrillar Fragmentation Index (MFI). In relation to the CAPN4751 polymorphism, a frequency of 10.5% was observed for the C allele in the Nellore breed. In the total sample of studied animals, a significant association was found between genotypes and meat tenderness, assessed by SF (P = 0.005) and MFI (P = 0.008), with genotype CT being more favourable than TT. For the CAST/DdeI polymorphism, a frequency of 55.7% was found for the A allele in the Nellore breed. In the total sample, a significant association was observed between genotypes and meat tenderness , SF (P = 0.004) and MFI (P = 0.006), with genotype AA being more favourable than AG. The relationship between genotypes and aged meat tenderness in confluence with the distribution of favourable alleles shows great potential for application of the CAPN4751 and CAST/DdeI polymorphisms in the genetic improvement of the Nellore breed, whilst contributing to the validation, in this breed and in its crosses with B. taurus, of the association results previously described in the literature. [source] | |||||||||||||||||||