Home About us Contact
|
Home About us Contact | ||
|
|
||
Iron Nanoparticles (iron + nanoparticle)
Selected AbstractsDifferential Pulse Voltammetric Determination of Uric Acid on Carbon-Coated Iron Nanoparticle Modified Glassy Carbon ElectrodesELECTROANALYSIS, Issue 10 2008Shengfu Wang Abstract A carbon-coated iron nanoparticles (CIN, a new style fullerence related nanomaterial) modified glassy carbon electrode (CIN/GCE) has been developed for the determination of uric acid (UA). Electrochemical behaviors of UA on CIN/GCE were explored by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). It was found that the voltammetric response of UA on CIN/GC was enhanced dramatically because of the strong accumulation effect of CIN and the large working area of the CIN/GC electrode. The parameters including the pH of supporting electrolyte, accumulation potential and time, that govern the analytical performance of UA have been studied and optimized. The DPV signal of UA on CIN/GCE increased linearly with its concentration in the range from 5.0×10,7 to 2.0×10,5 M, with a detection limit of 1.5×10,7 M (S/N=3). The CIN/GCE was used for the determination of UA in samples with satisfactory results. The proposed CIN/GCE electrochemical sensing platform holds great promise for simple, rapid, and accurate detection of UA. [source] Enhanced dechlorination of trichloroethylene by membrane-supported Pd-coated iron nanoparticlesENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY, Issue 2 2008Linfeng Wu Abstract In this study, cellulose acetate (CA) supported iron and Pd/Fe nanoparticles were used for dechlorination of trichloroethylene (TCE) from water. Solution and microemulsion methods were used to synthesize the iron nanoparticles. Pd/Fe bimetallic particles were prepared by postcoating Pd on the prepared iron nanoparticles. These materials were then dispersed in CA solution, which was used to prepare the membrane-supported nanoparticles. TEM imaging confirmed that the iron and Pd/Fe bimetallic nanoparticles were ,10 nm in diameter. The results of dechlorination studies showed that the surface composition of the Pd/Fe bimetallic nanoparticles (microemulsion method) significantly affected the observed reduction rate constant. In addition, the rate constant was a nonlinear function of metal loading and initial TCE concentration. A comparative study for the Pd/Fe (Pd 1.9 wt %) nanoparticles from solution and microemulsion methods showed that the nanoparticles formed by the latter method gave superior performance for the dechlorination of TCE. © 2008 American Institute of Chemical Engineers Environ Prog, 2008 [source] The Selective Heating of Iron Nanoparticles in a Single-Mode Microwave for the Patterned Growths of Carbon Nanofibers and NanotubesADVANCED FUNCTIONAL MATERIALS, Issue 8 2009Tamara Druzhinina Abstract The fast and cheap synthesis of carbon nanotubes is addressed in a large number of recent publications. At the same time, microwave-assisted synthesis has also gained interest. Besides the fact that reaction kinetics can be positively influenced by the use of microwave irradiation and advanced reaction conditions can be applied, absorption of microwave radiation depends on the material properties, thus resulting in a selective heating mechanism. The selective heating process allows for locally created temperatures high enough to promote the growth of carbon nanofibers and nanotubes on patterned iron catalyst layers. The resulting fibers are micrometers long, and can be synthesized in short time scales of a few minutes, yielding dense films of carbon fibers with uniform height. Here, the selective heating of surface bound iron nanoparticles is investigated in more detail, and experimental evidence for this effect is provided by utilizing a self-assembled monolayer of n -octadecyltrichlorosilane, which acts as a sensitive indicator for locally elevated temperatures. Special emphasis is placed on the development of an improved and controllable experimental setup that permits the safe and fast fabrication of the desired carbon objects. [source] Synthesis and stability of iron nanoparticles for lunar environment studiesMETEORITICS & PLANETARY SCIENCE, Issue 6 2010Ching-Cheh HUNG However, unlike the true lunar dust, today's simulants do not contain nanophase iron. Two different processes have been developed to fabricate nanophase iron to be used as part of a lunar dust simulant. (1) The first is to sequentially treat a mixture of ferric chloride, fluorinated carbon, and soda lime glass beads at about 300 °C in nitrogen, at room temperature in air, and then at 1050 °C in nitrogen. The product includes glass beads that are gray in color, can be attracted by a magnet, and contains ,-iron nanoparticles (which seem to slowly lose their lattice structure in ambient air during a period of 12 months). This product may have some similarity to the lunar glassy agglutinate, which contains FeO. (2) The second is to heat a mixture of carbon black and a lunar simulant (a mixed metal oxide that includes iron oxide) at 1050 °C in nitrogen. This process simulates lunar dust reactions with the carbon in a micrometeorite at the time of impact. The product contains a chemically modified simulant that can be attracted by a magnet and has a surface layer whose iron concentration increased during the reaction. The iron was found to be ,-iron and Fe3O4 nanoparticles, which appear to grow after the fabrication process. This growth became undetectable after 6 months of ambient air storage, but may last for several years or longer. [source] Characterization of single-walled carbon nanotubes synthesized using iron and cobalt nanoparticles derived from self-assembled diblock copolymer micellesAPPLIED ORGANOMETALLIC CHEMISTRY, Issue 8 2010Qiang Fu Abstract We present a comparative study of single-walled carbon nanotubes grown using iron and cobalt nanoparticles as catalysts via the chemical vapor deposition approach. Monodispersed iron and cobalt oxide nanoparticles with an average size of 2 nm were prepared using a polystyrene- b -poly (4-vinylpyridine) diblock copolymermicelle template. The 2 nm iron oxide nanoparticles generated single-walled carbon nanotubes with an average diameter of 1.5 nm while 2 nm cobalt oxide nanoparticles produced single-walled carbon nanotubes with an average diameter of 1.0 nm. To achieve high growth yield using iron nanoparticles as catalyst, higher carbon feed rate is required. These findings demonstrate the importance of the synergic interaction between catalyst and carbon precursor in single-walled carbon nanotube formation. It also elucidates the important role of catalyst chemical composition on carbon nanotube properties. Copyright © 2010 John Wiley & Sons, Ltd. [source] | ||||||||||