Home About us Contact
|
Home About us Contact | ||
|
|
||
Intense Fluorescence (intense + fluorescence)
Selected Abstracts2,5-Bis(p -R-arylethynyl)rhodacyclopentadienes Show Intense Fluorescence: Denying the Presence of a Heavy Atom,ANGEWANDTE CHEMIE, Issue 13 2010Andreas Steffen Dr. Schwermetall-Lichtshow: Photophysikalische Untersuchungen ergaben für eine Reihe von Rhodiumkomplexen unerwartet hohe Fluoreszenzquantenausbeuten (,f bis 69,%, ,f,1,3,ns) und ein unerwartet langsames Intersystem-Crossing. Diese neue Verbindungsklasse hinterfragt das gängige Modell zum Verhalten angeregter elektronischer Zustände und zur Rolle von Schweratomen in Intersystem-Crossing-Prozessen. THF=Tetrahydrofuran, Tol=Toluol. [source] Development of New Pyrrolocoumarin Derivatives with Satisfactory Fluorescent Properties and Notably Large Stokes ShiftsEUROPEAN JOURNAL OF ORGANIC CHEMISTRY, Issue 36 2008Lei Chen Abstract Small, organic, fluorescent molecules with large Stokes shifts and long emission wavelengths are ideal dyes for various modern fluorescent imaging technologies such as FRET. In this study, we designed and synthesized a number of new fluorescent molecules on the basic structures of two pyrrolocoumarin skeletons where Fischer's indole synthesis and the Suzuki coupling successfully served as the efficient molecular editing protocols. The examination of the fluorescent properties and further structural optimization of these compounds afforded three new pyrrolocoumarin dyes with notably large Stokes shifts and satisfactory fluorescent properties. Among these, 30 showed a large Stokes shift (113 nm) and intense fluorescence (, = 0.55, ,em = 523 nm), and thus showed great potential in biological imaging studies. (© Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2008) [source] Generic Strategy of Preparing Fluorescent Conjugated-Polymer-Loaded Poly(DL -lactide- co -Glycolide) Nanoparticles for Targeted Cell ImagingADVANCED FUNCTIONAL MATERIALS, Issue 22 2009Kai Li Abstract A general strategy for the preparation of highly fluorescent poly(DL-lactide- co -glycolide) (PLGA) nanoparticles (NPs) loaded with conjugated polymers (CPs) is reported. The process involves encapsulation of organic-soluble CPs with PLGA using a modified solvent extraction/evaporation technique. The obtained NPs are stable in aqueous media with biocompatible and functionalizable surfaces. In addition, fluorescent properties of the CP-loaded PLGA NPs (CPL NPs) could be fine-tuned by loading different types of CPs into the PLGA matrix. Four types of CPL NPs are prepared with a volume-average hydrodynamic diameter ranging from 243 to 272,nm. The application of CPL NPs for bio-imaging is demonstrated through incubation with MCF-7 breast cancer cells. Confocal laser scanning microscopy studies reveal that the CPL NPs are internalized in cytoplasm around the nuclei with intense fluorescence. After conjugation with folic acid, cellular uptake of the surface-functionalized CPL NPs is greatly enhanced via receptor-mediated endocytosis by MCF-7 breast cancer cells, as compared to that for NIH/3T3 fibroblast cells, which indicates a selective targeting effect of the folate-functionalized CPL NPs in cellular imaging. The merits of CPL NPs, such as low cytotoxicity, high fluorescence, good photostability, and feasible surface functionalization, will inspire extensive study of CPL NPs as a new generation of probes for specific biological imaging and detection. [source] Synthesis and Optical Properties of Europium-Doped ZnS: Long-Lasting Phosphorescence from Aligned Nanowires,ADVANCED FUNCTIONAL MATERIALS, Issue 11 2005C. Cheng Abstract Quasi-aligned Eu2+ -doped wurtzite ZnS nanowires on Au-coated Si wafers have been successfully synthesized by a vapor deposition method under a weakly reducing atmosphere. Compared with the undoped counterpart, incorporation of the dopant gives a modulated composition and crystal structure, which leads to a preferred growth of the nanowires along the [010] direction and a high density of defects in the nanowire hosts. The ion doping causes intense fluorescence and persistent phosphorescence in ZnS nanowires. The dopant Eu2+ ions form an isoelectronic acceptor level and yield a high density of bound excitons, which contribute to the appearance of the radiative recombination emission of the bound excitons and resonant Raman scattering at higher pumping intensity. Co-dopant Cl, ions can serve not only as donors, producing a donor,acceptor pair transition with the Eu2+ acceptor level, but can also form trap levels together with other defects, capture the photoionization electrons of Eu2+, and yield long-lasting (about 4,min), green phosphorescence. With decreasing synthesis time, the existence of more surface states in the nanowires forms a higher density of trap centers and changes the crystal-field strength around Eu2+. As a result, not only have an enhanced Eu2+ 4f65d1,4f7 intra-ion transition and a prolonged afterglow time been more effectively observed (by decreasing the nanowires' diameters), but also the Eu2+ related emissions are shifted to shorter wavelengths. [source] Syntheses and photophysical properties of some 4-arylpyridinium saltsJOURNAL OF HETEROCYCLIC CHEMISTRY, Issue 1 2001Charles J. Kelley A number of 4-arylpyridines, many methoxy substituted, were prepared by an efficient two-step method involving aryl Grignard addition to 1-methyl-4-piperidone and direct aromatization of the resulting 4-aryl-4-piperidinols. The pyridines were N -alkylated to give sulfonate salts desired for their fluorescent properties. Study of selected compounds as laser dyes revealed several structures to be efficient dyes lasing in the 530-550 nm range. Two new diazaquaterphenyls were prepared and were quaternized. These salts exhibited intense fluorescence in the 420-450 nm range, but would not lase. A phenolic azaterphenyl suitably substituted for excited state intramolecular proton transfer (ESIPT) did not fluoresce at all. [source] Synthesis of azobenzene-containing polymers via RAFT polymerization and investigation on intense fluorescence from aggregates of azobenzene-containing amphiphilic diblock copolymersJOURNAL OF POLYMER SCIENCE (IN TWO SECTIONS), Issue 16 2008Jie Xu Abstract The well-defined azobenzene-containing homopolymers, poly{6-(4-phenylazophenoxy)hexyl methacrylate (AHMA)} (PAHMA), were synthesized via reversible addition fragmentation chain transfer polymerization (RAFT) in anisole solution using 2-cyanoprop-2-yl 1-dithionaphthalate (CPDN) as the RAFT agent and 2,2,-azobisisobutyronitrile (AIBN) as the initiator. The first-order kinetic plot of the polymerization and the linear dependence of molecular weights of the homopolymers with the relatively low polydispersity index values (PDIs , 1.25) on the monomer conversions were observed. Furthermore, the amphiphilic diblock copolymer, poly{6-(4-phenylazophenoxy)hexyl methacrylate (AHMA)}- b -poly{2-(dimethylamino)ethyl methacrylate (DMAEMA)} (PAHMA- b -PDMAEMA), was prepared with the obtained PAHMA as the macro-RAFT agent. The structures and properties of the polymers were characterized by 1H NMR and GPC, respectively. Interestingly, the amphiphilic diblock copolymers in chloroform (CHCl3) solution (PAHMA23 - b -PDMAEMA97 (4 × 10,5 M, Mn(GPC) = 18,400 g/mol, PDI = 1.48) and PAHMA28 - b -PDMAEMA117 (6 × 10,5 M, Mn(GPC) = 19,300 g/mol, PDI = 1.51) exhibited the intense fluorescence emission at ambient temperature. Moreover, the fluorescent intensity of PAHMA- b -PDMAEMA in CHCl3 was sensitive to the ultraviolet irradiation at 365 nm, which increased within the first 10 min and later decreased when irradiation time was prolonged to 30 min or longer. The well distributed, self-assembled micelles composed of azobenzene-containing amphiphilic diblock copolymers, (PAHMA- b -QPDMAEMA)s (QPDMAEMA is quaternized PDMAEMA), in the mixed N,N -dimethyl formamide (DMF)/H2O solutions were prepared. Their fluorescent intensities decreased with the increasing amount of water. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5652,5662, 2008 [source] Ultrastructural Study of Encystation and Excystation in Acanthamoeba castellaniiTHE JOURNAL OF EUKARYOTIC MICROBIOLOGY, Issue 2 2005BIBIANA CHÁVEZ-MUNGUÍA Abstract. Encystation and excystation of Acanthamoeba castellanii were studied by transmission electron microscopy. The differentiation process was induced in asynchronous cultures grown axenically. Cytoplasmic vesicles containing a dense fibrous material very similar in appearance to the cyst wall were observed in trophozoites induced to encyst. When these trophozoites were incubated with calcofluor white m2r, fluorescence was observed in cytoplasmic vesicles, suggesting that the material contained in these vesicles corresponded to cyst wall precursors. Semithin cryosections of mature cysts with the same treatment showed fluorescence in the ectocyst and a less intense fluorescence in the endocyst, suggesting the presence of cellulose in both structures of the cyst wall. In mature cysts induced to excystation, small structures very similar to electron-dense granules (EDG) previously described in other amoebae were frequently observed. The EDGs were either sparsely distributed in the cytoplasm or associated with the cytoplasmic face of the plasma membrane. Many of them were located near the ostiole. In advanced phases of excystation, endocytic activity was suggested by the formation of endocytic structures and the presence of vacuoles with fibrous content similar to that of the cyst wall. Electron-dense granules in the process of dissolution were also observed in these vacuoles. Furthermore, the formation of a pseudopod suggests a displacement of the amoeba toward the ostiole. [source] PdCl2 -Catalyzed Domino Reactions of 2-Alkynylbenzaldehydes with Indoles: Synthesis of Fluorescent 5H -Benzo[b]carbazol-6-yl KetonesCHEMISTRY - A EUROPEAN JOURNAL, Issue 16 2010Ri-Yuan Tang Synthetic methods: A new, selective Pd-catalyzed domino reaction of 2-alkynylbenzaldehydes with indoles has been developed for the synthesis of 5H -benzo[b]carbazol-6-yl ketones. The isobenzopyrylium complex is trapped by indole at room temperature to give 3-(1H -isochromen-1-yl)-1H -indoles, which can be transformed into 5H -benzo[b]carbazol-6-yl ketones by raising the temperature (see scheme). These ketones exhibit intense fluorescence and interact with metal ions to enhance the fluorescence intensity. [source] Asymmetrical Fluorene[2,3- b]benzo[d]thiophene Derivatives: Synthesis, Solid-State Structures, and Application in Solution-Processable Organic Light-Emitting DiodesCHEMISTRY - A EUROPEAN JOURNAL, Issue 33 2009Chunyan Du Abstract A series of novel asymmetrical fused compounds containing the backbone of fluorene[2,3- b]benzo[d]thiophene (FBT) were effectively synthesized and fully characterized. Single-crystal X-ray studies demonstrated that the length of the substituent side chains greatly affects the solid-state packing of the obtained fused compounds. DFT, photophysical, and electrochemical studies all showed that the FBTs have large band gaps, low-lying HOMO energy levels, and therefore good stability toward oxidation. Moreover, the substituents strongly influence the fluorescence properties of the resulting FBT derivatives. The di- n -hexyl compound exhibits intense fluorescence in solution with the highest quantum yield of up to 91,%. Solution-processed green phosphorescent organic light-emitting diodes with the di- n -butyl derivative as the host material exhibited a maximum brightness of 14,185,cd,m,2 and a luminescence efficiency of 12,cd,A,1. [source] Luminescent Excited-State Intramolecular Proton-Transfer (ESIPT) Dyes Based on 4-Alkyne-Functionalized [2,2,-Bipyridine]-3,3,-diol DyesCHEMISTRY - A EUROPEAN JOURNAL, Issue 14 2008Gilles Ulrich Dr. Abstract Functionalized 6,6,-dimethyl-3,3,-dihydroxy-2,2,-bipyridine dyes (BP(OH)2) exhibit relatively intense fluorescence from the relaxed excited state formed by excited-state intramolecular proton transfer (ESIPT). Bromo functionalization of (BP(OH)2) species followed by palladium(0)-catalyzed reactions allows the connection (via alkyne tethers) of functional groups, such as the singlet-emitter diazaboraindacene (bodipy) group or a chelating module (terpyridine; terpy). The X-ray structure of the terpy-based compound confirms the planarity of the 3,3,-dihydroxy-bipyridine unit. The new dyes exhibit relatively intense emission on the nanosecond timescale when in fluid solution, in the solid state at 298,K, and in rigid glasses at 77,K. In some cases, the excitation wavelength luminescence was observed and attributed to 1),inefficiency of the ESIPT process in particular compounds when not enough vibrational energy is introduced in the Franck,Condon state, which is populated by direct light excitation or 2),the presence of an additional excited state that deactivates to the ground state without undergoing the ESIPT process. For some selected species, the effect of the addition of zinc salts on the absorption and luminescence spectra was investigated. In particular, significant fluorescence changes were observed as a consequence of probable consecutive formation of a 1:1 and 1:2 molecular ratio of ligand/zinc adducts owing to coordination of ZnII ions by the bipyridyldiol moieties, except when an additional terpyridine subunit is present. In fact, this latter species preferentially coordinates to the ZnII ion in a 1:1 molecular ratio and further inhibits ZnII interaction. In the hybrid Bodipy/BP(OH)2 species, complete energy transfer from the BP(OH)2 to the bodipy fluorophore occurs, leading to exclusive emission from the lowest-lying bodipy subunit. Des composés colorés à base de 6,6,-dimethyl-3,3,-dihydroxy-2,2,-bipyridine (BP(OH)2) ont été synthétisés et présentent une fluorescence relativement intense issue de la relaxation d,un état excité provenant d,un transfert de proton dans l,état excité (ESIPT). La bromation de dérivés (BP(OH)2) suivie d,un couplage croisé catalysé par du Pd0sous-ligandé permet de connecter (par l,intermédiaire de pont alcyne) des groupes fonctionnels comme un groupe émetteur singulet de type boradiazaindacène (Bodipy) ou un module chélatant universel (une terpyridine). Une structure par diffraction aux rayons X a été obtenu avec le dérivé terpyridine, celle ci confirme la planéité de l,unité 3,3,-dihydroxy-bipyridine. Les nouveaux fluorophores possèdent une émission relativement intense avec une durée de vie de l,ordre de la nanoseconde, en solution et à l,état solide à 298,K ainsi que dans un verre à 77,K. Dans certain cas, la luminescence dépend de la longueur d,onde d,excitation, ce phénomène est attribué à (i) l,inefficacité du processus ESIPT, quand trop peu d,énergie vibrationnelle est introduite dans l,état Franck-Condon peuplé directement par la lumière d,excitation (ii) la présence d,un état excité supplémentaire qui désactive l,état fondamental sans passer par un processus ESIPT. Pour certains composés, l,effet de l,addition de sels de Zinc sur les spectres d,absorption et d,émission a été étudié : en particulier, des changements significatifs de fluorescence ont été observés, probablement due à la formation consécutive de complexes ligand/zinc de st,chiométrie 1:1 et 1:2, provenant de la coordination des cations ZnIIpar l,unité bipyridyl-diol, sauf quand une fonction terpyridine est présente. En fait, dans cette dernière espèce le zinc est préférentiellement coordiné par la terpyridine dans un ratio 1:1, et toute coordination supplémentaire de Zinc semble inhibée. Dans le composé hybride Bodipy/BP(OH)2,un transfert d,énergie quantitatif est observé du BP(OH)2vers le fluorophore Bodipy, entraînant une émission exclusive de la sous-unité Bodipy. Composti basati sulla subunità 6,6,-dimetil-3,3,-dididrossi-2,2,-bipiridina (BP(OH)2), variamente funzionalizzati, presentano fluorescenza relativamente intensa da stati eccitati formati attraverso trasferimento protonico nello stato eccitato (ESIPT). Bromo-funzionalizzazione dei composti di tipo BP(OH)2, seguita da reazioni catalizzate da Pd(0), permettono di connettere (con legame alchinico) gruppi funzionali quali il diazaboroindacene (Bodipy) o un modulo chelante (terpiridina) al frammento BP(OH)2. La struttura ai raggi X del composto contenente la terpiridina conferma la planarità dell,unità 3,3,-diidrossi-bipiridina. Le nuove specie presentano intensa emissione nella scala dei nanosecondi, in soluzione fluida ed allo stato solido a 298,K ed in matrice rigida a 77,K. In alcuni casi, la luminescenza dipende dalla lunghezza d,onda di eccitazione: questo fenomeno è attribuito a (i) inefficienza del processo ESIPT, quando non sufficiente energia vibrazionale è introdotta nello stato Franck-Condon a seguito di eccitazione luminosa o (ii) alla presenza di uno stato eccitato addizionale che si disattiva allo stato fondamentale senza passare dallo stato eccitato prodotto attraverso il meccanismo ESIPT. Per composti selezionati è stato anche studiato l,effetto della presenza di sali di zinco sulle proprietà di assorbimento elettronico e di luminescenza: significativi cambiamenti della fluorescenza sono stati osservati, come conseguenza della consecutiva formazione di addotti 1:1 e 1:2 (rapporto molare BP(OH)2/zinco), dovuta alla coordinazione di cationi di ZnIIda parte del bipiridil-diolo, che si verifica in tutti i casi studiati tranne in presenza di una subunità terpiridinica. In quest,ultimo caso, infatti, si forma soltanto l,addotto 1:1, e ulteriore coordinazione di cationi di ZnIIappare inibita. Nella specie ibrida Bodipy/BP(OH)2si verifica un completo trasferimento di energia elettronica dal BP(OH)2 al Bodipy, che porta ad emissione esclusivamente dalla subunità Bodipy, a piû bassa energia. [source] | |||||||||||||||||||||||||