Ion Exchange Reaction (ion + exchange_reaction)

Distribution by Scientific Domains


Selected Abstracts


Synthesis of Pb-Feldspar by Ion Exchange Reaction and Its Implications

ACTA GEOLOGICA SINICA (ENGLISH EDITION), Issue 2 2006
LIU Rui
Abstract, Feldspar and Pb(NO3)2 were mixed and reacted at T=380°C to synthesize Pb-feldspar. In the XRD (X-ray diffraction) pattern of the product, the d values (crystal lattice spacing) of the five peaks are 0.654, 0.342, 0.332, 0.327 and 0.257 nm. The XPS analysis results show that the binding energy of Pb 4f7/2 in the feldspar was between 137.81,138.03 eV. Pb2+ can replace alkali and alkali earth cations in the feldspar structure through ion exchange reaction to form Pb-feldspar. [source]


Ion Exchange Reactions of NaSbO3 and Morphotropic Series MSbO3.

CHEMINFORM, Issue 10 2007
Vladimir Babkenovich Nalbandyan
Abstract ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract, please click on HTML or PDF. [source]


Effect of clay with different cation exchange capacity on the morphology and properties of poly(methyl methacrylate)/clay nanocomposites

POLYMER COMPOSITES, Issue 11 2009
Tsung-Yen Tsai
PMMA/clay nanocomposites were successfully prepared by in situ free-radical polymerization with the organic modified MMT-clay using methyl methacrylate monomer and benzoyl peroxide initiator. Two clays with different cation exchange capacity have been used to prepare and compare the several properties. The clays have been modified using Amphoterge K2 by ion exchange reaction to increase the compatibility between the clay and polymer matrices. The modified clays have been characterized by wide-angle X-ray diffraction pattern, Fourier transform infrared spectroscopy, and thermogravimetric analysis (TGA). The powdered X-ray diffraction and transmission electron microscopy techniques were employed to study the morphology of the PMMA/clay nanocomposites which indicate that the modified clays are dispersed in PMMA matrix to form both exfoliated and intercalated PMMA/modified clay nanocomposites. The thermomechanical properties were examined by TGA, differential scanning calorimetry, and dynamic mechanical analysis. Gas permeability analyzer shows the excellent gas barrier property of the nanocomposites, which is in good agreement with the morphology. The optical property was measured by UV,vis spectroscopy which shows that these materials have good optical clarity and UV resistance. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers [source]


Synthesis of Pb-Feldspar by Ion Exchange Reaction and Its Implications

ACTA GEOLOGICA SINICA (ENGLISH EDITION), Issue 2 2006
LIU Rui
Abstract, Feldspar and Pb(NO3)2 were mixed and reacted at T=380°C to synthesize Pb-feldspar. In the XRD (X-ray diffraction) pattern of the product, the d values (crystal lattice spacing) of the five peaks are 0.654, 0.342, 0.332, 0.327 and 0.257 nm. The XPS analysis results show that the binding energy of Pb 4f7/2 in the feldspar was between 137.81,138.03 eV. Pb2+ can replace alkali and alkali earth cations in the feldspar structure through ion exchange reaction to form Pb-feldspar. [source]


Dynamic Equilibria in Solvent-Mediated Anion, Cation and Ligand Exchange in Transition-Metal Coordination Polymers: Solid-State Transfer or Recrystallisation?

CHEMISTRY - A EUROPEAN JOURNAL, Issue 35 2009
Xianjin Cui
Abstract The solution properties of a series of transition-metal,ligand coordination polymers [ML(X)n], [M=AgI, ZnII, HgII and CdII; L=4,4,-bipyridine (4,4,-bipy), pyrazine (pyz), 3,4,-bipyridine (3,4,-bipy), 4-(10-(pyridin-4-yl)anthracen-9-yl)pyridine (anbp); X=NO3,, CH3COO,, CF3SO3,, Cl,, BF4,; n=1 or 2] in the presence of competing anions, metal cations and ligands have been investigated systematically. Providing that the solubility of the starting complex is sufficiently high, all the components of the coordination polymer, namely the anion, the cation and the ligand, can be exchanged on contact with a solution phase of a competing component. The solubility of coordination polymers is a key factor in the analysis of their reactivity and this solubility depends strongly on the physical properties of the solvent and on its ability to bind metal cations constituting the backbone of the coordination polymer. The degree of reversibility of these solvent-induced anion-exchange transformations is determined by the ratio of the solubility product constants for the starting and resultant complexes, which in turn depend upon the choice of solvent and the temperature. The extent of anion exchange is controlled effectively by the ratio of the concentrations of incoming ions to outgoing ions in the liquid phase and the solvation of various constituent components comprising the coordination polymer. These observations can be rationalised in terms of a dynamic equilibrium of ion exchange reactions coupled with Ostwald ripening of crystalline products. The single-crystal X-ray structures of [Ag(pyz)ClO4], (1), {[Ag(4,4,-bipy)(CF3SO3)],CH3CN}, (2), {[Ag(4,4,-bipy)(CH3CN)]ClO4, 0.5,CH3CN}, (3), metal-free anbp (4), [Ag(anbp)NO3(H2O)], (5), {[Cd(4,4,-bipy)2(H2O)2](NO3)2,4,H2O}, (6) and {[Zn(4,4,-bipy)SO4(H2O)3] ,2,H2O}, (7) are reported. [source]