Home About us Contact
|
Home About us Contact | ||
|
|
||
Hydrophobic Substances (hydrophobic + substance)
Selected AbstractsImmobilized Cytochrome c Sensor in Organic/Aqueous Media for the Characterization of Hydrophilic and Hydrophobic AntioxidantsELECTROANALYSIS, Issue 18 2003Moritz Beissenhirtz Abstract A method for the characterization of antioxidants is introduced, which allows the measurement of pure hydrophilic and hydrophobic substances as well as complex cosmetic creams. The sensor is based on cytochrome c covalently immobilized on a gold wire electrode working in mixtures of phosphate buffer and organic solvents. It is combined with a superoxide generating enzyme system. The decrease of the superoxide concentration in the test solution by the added antioxidants is detected and used for the quantification of their antioxidative efficiency. Electrochemical properties of immobilized cytochrome c, such as formal potential and heterogeneous electron transfer rate constant, have been investigated in mixtures of aqueous buffer and DMSO, methanol, butanediol, and THF. The maximum organic solvent content for quasi-reversible electrode behavior was correlated to spectroscopic measurements. The activity of the radical producing enzyme in such media was determined and the radical generation characterized. The antioxidative properties of pure substance such as ascorbic acid and Biochanin A as well as of five anti-ageing cosmetic creams were studied. This showed also the influence of matrix composition on the efficiency of antioxidative supplements. [source] Characterizing organic matter of soil aggregate coatings and biopores by Fourier transform infrared spectroscopyEUROPEAN JOURNAL OF SOIL SCIENCE, Issue 2 2004R. H. Ellerbrock Summary In some soils, aggregate coatings and walls of biopores differ in the content of clay and organic carbon from that of the aggregate interiors or the soil matrix. The composition of the organic matter on aggregates and on the surfaces of biopores is largely unknown. We have compared the composition of organic matter between inner and outer parts of aggregates and between biopore walls and the soil matrix in a loamy arable soil and a sandy forest one. Hot-water- and sodium-pyrophosphate-extractable organic matter was analysed by Fourier transform infrared (FT-IR) spectroscopy. For the sandy forest soil, the FT-IR spectra showed that organic matter from the walls of root channels contains fewer functional groups with absorption bands at 1740,1710 cm,1 and 1640,1600 cm,1 than that from burrow fillings. For the arable soil, the content of these functional groups in hot-water-soluble organic matter from the coatings is less than in that from the interiors in the topsoil, and the reverse is so in the subsoil, probably because water-soluble organic matter containing these functional groups has moved from topsoil to subsoil. The results indicate that root channels in the forest soil have more reactive zones in an otherwise relatively inert sandy matrix, whereas aggregate coatings in the arable subsoil have a greater cation exchange capacity and a greater sorption potential for hydrophobic substances than the aggregate interiors. [source] Monodisperse Polymer Capsules: Tailoring Size, Shell Thickness, and Hydrophobic Cargo Loading via Emulsion TemplatingADVANCED FUNCTIONAL MATERIALS, Issue 10 2010Jiwei Cui Abstract The preparation of monodisperse polymer (polydopamine, PDA) capsules by a one-step interfacial polymerization of dopamine onto dimethyldiethoxysilane (DMDES) emulsion droplets and removal of the DMDES templates with ethanol is reported. The diameters of the PDA capsules can be tailored from 400,nm to 2.4,µm by varying either the DMDES emulsion condensation time or the emulsion concentration used for templating. Further, capsules with defined nanometer-scale shell thicknesses (ranging from ,10 to 30,nm) can be prepared by adjusting the emulsion concentration. This shell thickness can be increased by repeated interfacial polymerization of dopamine, with three cycles yielding capsules with a shell thickness of up to 140,nm (for a 0.6% v/v suspension). Functional substances, such as organically stabilized magnetic (Fe3O4) nanoparticles, quantum dots (CdSe/CdS), and hydrophobic drugs (thiocoraline), can be preloaded in the emulsion droplets, and following PDA coating and DMDES removal, these materials remain encapsulated in the polymer capsules. All of the unloaded and loaded PDA capsules are monodisperse and do not aggregate. This work provides new avenues for the preparation of polymer capsules with defined size and shell thickness and for the encapsulation of a range of hydrophobic substances. [source] Hydrophobicity-aided potentiometric detection of catecholamines, beta-agonists, and beta-blockers in a mixed-solvent capillary electrophoresis systemJOURNAL OF SEPARATION SCIENCE, JSS, Issue 1 2009Grzegorz Bazylak Abstract A series of cationic drug-like substances with distinct basicity, hydrogen-bonding ability, and hydrophobicity, including three catecholamines, two beta-agonists, and thirteen beta-blockers, was successfully detected in a capillary electrophoresis system using an end-capillary coupled potentiometric sensor consisting of a PVC-based liquid membrane deposited directly on a 100 ,m diameter copper rod. The electrophoretic separation was performed on a 72 cm×75 ,m id uncoated fused-silica capillary with an acidic background electrolyte containing phosphoric acid in a water,acetonitrile mixture, pH* 2.8. Samples were injected electrokinetically at 5.0 kV for 10 s and a running voltage of 19.5 kV was applied. Excluding the bufuralol/practolol pair, baseline separation of all substances was achieved in the developed CE system within 9 minutes. A linear relationship (R2 0.8752) between the sensitivity of the applied potentiometric detector and the parameter log P characterising the hydrophobicity of the analytes was demonstrated. The best observable limits of detection (LODs) were obtained for the highly hydrophobic substances, i. e. bufuralol (8.10×10,8 M injected concentration, S/N = 3), propranolol, alprenolol, and clenbuterol (ca. 1.10×10,7 M). In the case of hydrophilic catecholamines and carbuterol their LODs with potentiometric detection were lowered by a factor of almost one thousand, reaching a value of 6.6×10,5 M. [source] Supported liquid membranes in hollow fiber liquid-phase microextraction (LPME) , Practical considerations in the three-phase modeJOURNAL OF SEPARATION SCIENCE, JSS, Issue 9 2007Kari Folde Bårdstu Abstract In this work, three-phase liquid-phase microextraction (LPME) based on a supported liquid membrane (SLM) sustained in the wall of a hollow fiber was investigated with special focus on optimization of the experimental procedures in terms of recovery and repeatability. Recovery data for doxepin, amitriptyline, clomipramine, and mianserin were in the range of 67.8,79.8%. Within-day repeatability data for the four basic drugs were in the range of 4.1,7.7%. No single factor was found to be responsible for these variations, and the variability was caused by several factors related to the LPME extractions as well as to the final HPLC determination. Although the volume of the SLM varied within 0.4,3.1% RSD depending on the preparation procedure, and the volume of the acceptor solution varied within 4.8% RSD, both recoveries and repeatability were found to be relative insensitive to these variations. Thus, the handling of microliters of liquid in LPME was not a very critical factor, and the preparation of the SLM was accomplished in several different ways with comparable performance. Reuse of hollow fibers was found to suffer from matrix effects due to built-up of analytes in the SLM, whereas washing of the hollow fibers in acetone was beneficial in terms of recovery, especially for the extraction of the most hydrophobic substances. Several of the organic solvents used in the literature as SLM suffered from poor long-term stability, but silicone oil AR 20 (polyphenyl-methylsiloxane), 2-nitrophenyl octyl ether (NPOE), and dodecyl acetate (DDA) all extracted with unaltered performance even after 60 days of storage at room temperature. [source] Therapeutic monitoring of imipramine and desipramine by micellar liquid chromatography with direct injection and electrochemical detectionBIOMEDICAL CHROMATOGRAPHY, Issue 5 2005Devasish Bose Abstract A micellar liquid chromatographic (MLC) procedure was developed for the clinical monitoring of imipramine and its active metabolite, desipramine. The determination of these highly hydrophobic substances was carried out after direct injection of the serum samples using a mobile phase composed of 0.15 m SDS,6% (v/v) pentanol buffered at pH 7, pumped at 1.5 mL/min into a C18 column (250 × 4.6 mm), and electrochemical detection at 650 mV. Using this MLC method, calibration was linear (r > 0.995) and the limits of detection (ng/mL) were 0.34 and 0.24 for imipramine and desipramine, respectively. Repeatabilities and intermediate precision were tested at three different concentrations in the calibration range and a CV (%) below 2.2 was obtained. In this MLC procedure, the serum is determined without treatment, thus allowing repeated serial injections without changes in retention factors, and reducing the time and consumables required to carry out the pretreatment process. The assay method can be applied to the routine determination of serum imipramine and its metabolite in therapeutic drug monitoring. Copyright © 2004 John Wiley & Sons, Ltd. [source] | ||||||||||