Home About us Contact
|
Home About us Contact | ||
|
|
||
Hydrodynamic Effects (hydrodynamic + effects)
Selected AbstractsSeismic response of intake towers including dam,tower interactionEARTHQUAKE ENGINEERING AND STRUCTURAL DYNAMICS, Issue 3 2009M. A. Millán Abstract The seismic response of the intake,outlet towers has been widely analyzed in recent years. The usual models consider the hydrodynamic effects produced by the surrounding water and the interior water, characterizing the dynamic response of the tower,water,foundation,soil system. As a result of these works, simplified added mass models have been developed. However, in all previous models, the surrounding water is assumed to be of uniform depth and to have infinite extension. Consequently, the considered added mass is associated with only the pressures created by the displacements of the tower itself. For a real system, the intake tower is usually located in proximity to the dam and the dam pressures may influence the equivalent added mass. The objective of this paper is to investigate how the response of the tower is affected by the presence of the dam. A coupled three-dimensional boundary element-finite element model in the frequency domain is employed to analyze the tower,dam,reservoir interaction problem. In all cases, the system response is assumed to be linear, and the effect of the internal fluid and the soil,structure interaction effects are not considered. The results suggest that unexpected resonance amplifications can occur due to changes in the added mass for the tower as a result of the tower,dam,reservoir interaction. Copyright © 2008 John Wiley & Sons, Ltd. [source] Highlight of a compensation effect between filler morphology and loading on dynamic properties of filled rubbersJOURNAL OF APPLIED POLYMER SCIENCE, Issue 5 2010Franck Sosson Abstract This investigation highlighted the equivalence between carbon black (CB) loading and structure influences on dynamic mechanical properties in the linear behavior of several filled synthetic rubber compounds. Different morphologies (specific surface area and structure) of CB incorporated at different loadings were formulated to modulate the filler-rubber matrix interphase content, usually named "tightly bound rubber." Both reinforcement level and tightly bound rubber content were measured on each compound by dynamic mechanical analysis (DMTA) and by Soxhlet extraction and thermogravimetry (TGA) respectively. Then, a systematic description of their evolution was made against CB loading and morphology. These evolutions were attributed to the hydrodynamic effect which could be evaluated by the effective filler volume fraction. A new parameter , is defined, representing the effective filler volume fraction for each compound and it was calculated on the basis of experimental parameters. Results show good correspondences between , included both the hydrodynamic effects of the filled carbon black rubbers and dynamic mechanical properties. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010 [source] Dynamics of end grafted DNA molecules and possible biosensor applicationsPHYSICA STATUS SOLIDI (A) APPLICATIONS AND MATERIALS SCIENCE, Issue 14 2006C. Sendner Abstract Polymers that are terminally attached to solid supports, so called brushes, form the basis for a wide variety of different applications in colloidal and biophysical sciences. For grafted charged chains a conducting surface allows to manipulate the brush structure by applying electric fields across the brush. The dynamics of oligomeric DNA molecules under the action of repulsive and attractive surface electric fields is studied by Brownian dynamics simulations including hydrodynamic effects and compared to experimental results. The difference in flexibility between double and single stranded DNA molecules leads to a change in the switching dynamics when repeatedly reversing the surface charge. This effect allows to detect hybridization of surface anchored DNA. Similar kinetic changes occur when other molecules bind terminally to DNA, opening the possibility to use end grafted polymers for general biosensing applications. We in particular discuss the influence of the adsorbate size and change on the switching dynamics. (© 2006 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [source] Experimental investigation of a moored floating systemPROCEEDINGS IN APPLIED MATHEMATICS & MECHANICS, Issue 1 2008Daniel Beyer Floating structures are generally excited by a more or less irregular sea state. Therefore the structure undergoes a nonlinear dynamical behaviour which results from hydrodynamic effects or the kinematic coupling of different components. The motions of these structures have been analysed intensively with numerical techniques which predict a wide range of nonlinear effects. On the other hand, experiments are still important when it comes to verifying these theoretical findings. Investigating such a floating structure experimentally requires a complex setup: A wave generator needs to be driven in an appropriate way to yield waves with the required characteristics at the structure. The structure itself is usually designed similar to a real,world system and it has to allow for a comparison with numerical analyses. Sensors which measure the tracks of the individual components not only have to reach a prescribed precision but also need to ensure that the motion is not perturbed as a result of the measurements. Lastly, unwanted disturbances have to be avoided. For experiments in a wave tank this includes that reflections have to be minimized. This talk addresses the development of an experimental setup for the investigation of a floating structure. It highlights components which are found to be critical for the obtained accuracy and proposes techniques to reduce experimental errors. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [source] Flow characterization of a wavy-walled bioreactor for cartilage tissue engineeringBIOTECHNOLOGY & BIOENGINEERING, Issue 6 2006Bahar Bilgen Abstract Cartilage tissue engineering requires the use of bioreactors in order to enhance nutrient transport and to provide sufficient mechanical stimuli to promote extracellular matrix (ECM) synthesis by chondrocytes. The amount and quality of ECM components is a large determinant of the biochemical and mechanical properties of engineered cartilage constructs. Mechanical forces created by the hydrodynamic environment within the bioreactors are known to influence ECM synthesis. The present study characterizes the hydrodynamic environment within a novel wavy-walled bioreactor (WWB) used for the development of tissue-engineered cartilage. The geometry of this bioreactor provides a unique hydrodynamic environment for mammalian cell and tissue culture, and investigation of hydrodynamic effects on tissue growth and function. The flow field within the WWB was characterized using two-dimensional particle-image velocimetry (PIV). The flow in the WWB differed significantly from that in the traditional spinner flask both qualitatively and quantitatively, and was influenced by the positioning of constructs within the bioreactor. Measurements of velocity fields were used to estimate the mean-shear stress, Reynolds stress, and turbulent kinetic energy components in the vicinity of the constructs within the WWB. The mean-shear stress experienced by the tissue-engineered constructs in the WWB calculated using PIV measurements was in the range of 0,0.6 dynes/cm2. Quantification of the shear stress experienced by cartilage constructs, in this case through PIV, is essential for the development of tissue-growth models relating hydrodynamic parameters to tissue properties. © 2006 Wiley Periodicals, Inc. [source] | ||||||||||