Home About us Contact
|
Home About us Contact | ||
|
|
||
Hull
Kinds of Hull Selected AbstractsTHIN-LAYER DRYING KINETICS OF SESAME HULLS UNDER FORCED CONVECTION AND OPEN SUN DRYINGJOURNAL OF FOOD PROCESS ENGINEERING, Issue 3 2007MAJDI A. AL-MAHASNEH ABSTRACT Sesame hulls are a useful by-product of the sesame processing industry. The sesame hulls are produced at a high moisture content (68% wet basis) and need further drying to prevent deterioration. In this study, both open sun drying (OSD) and forced convection drying (FCD) at 42, 55, and 76C and 1.2 m/s air velocity were investigated. Six common thin-layer drying models were fitted to the experimental data. Several statistical parameters were used to evaluate the performance of thin-layer drying models, including r2, x2, root mean square error (RMSE) and residuals. Sesame hull drying was found to take place completely in the falling rate region. The modified Page model was found to describe OSD data well, while the Wang and Singh model was the best model for describing FCD. Effective diffusivity was found to be 1.89 × 10 - 8 m2/s and 7.36 × 10 - 10 to 1.20 × 10 - 9 m2/s for OSD and FCD, respectively. Activation energy was also found to be 12.95 kJ/mol for FCD. [source] Establishing pragmatic estimated GFR thresholds to guide metformin prescribingDIABETIC MEDICINE, Issue 10 2007J. S. Shaw Abstract Aims, Renal impairment is a contraindication to metformin treatment because of the perceived increased risk of lactic acidosis. Current guidelines define renal impairment according to the serum creatinine of the individual, but this measure is being supplanted by the use of estimated glomerular filtration rate (eGFR) as it gives a closer estimate to true GFR. This study aimed to establish pragmatic eGFR limits for use in patients being considered for metformin treatment. Methods, Estimated GFR measurements corresponding to currently used metformin creatinine limits of 130 and 150 µmol/l were derived and then applied to 12 482 patients with diabetes in Hull and East Yorkshire. Results, Few patients with a serum creatinine of 130 or 150 µmol/l have an eGFR of < 30 ml/min/1.73 m2[chronic kidney disease (CKD) stage 4 or greater], while most are between 30 and 59 ml/min/1.73 m2 (CKD stage 3). When applied to the 12 482 patients (median age 67 years, interquartile range 56,75), males predominated when using creatinine cut-offs (13.6% of males and 8.3% of females had creatinine > 130 µmol/l; 8.2% males and 5.2% females > 150 µmol/l), but not using eGFR CKD thresholds (3.3% males and 4.7% females < 30 ml/min/1.73 m2; 20.8% males and 28.1% females eGFR 30,59 ml/min/1.73 m2). Similar proportions of patients as currently would have metformin withheld if using eGFR cut-offs between 30 and 49 ml/min/1.73 m2. Conclusions, We have proposed pragmatic eGFR limits to guide metformin prescribing in patients with renal impairment. CKD stage 4 or greater should be an absolute contraindication to metformin, while CKD stage 3 should alert clinicians to consider other risk factors before initiating or continuing treatment. [source] Host shifting by Operophtera brumata into novel environments leads to population differentiation in life-history traitsECOLOGICAL ENTOMOLOGY, Issue 5 2003Adam J. Vanbergen Abstract., 1. Operophtera brumata L. (Lepidoptera: Geometridae), a polyphagous herbivore usually associated with deciduous trees such as oak Quercus robur L., has expanded its host range to include the evergreen species heather Calluna vulgaris (L.) Hull and, most recently, Sitka spruce Picea sitchensis (Bong.) Carrière. 2. Phenology, morphology, and survival of O. brumata were measured at several life-history stages in populations from the three different host plant communities sampled from a range of geographical locations. The data were used to test for population differences, reflecting the marked differences in host-plant secondary chemistry, growth form, and site factors such as climate. The hypothesis that spruce-feeding populations originated from populations feeding on moorland, commonly sites of coniferous afforestation, was also tested. 3. Altitude, not host plant species, was the major influence on the timing of adult emergence. An effect of insect population independent of altitude was found, implying that additional unidentified factors contribute to this phenological variation. Larval survival and adult size varied between populations reared on different host plant species. Survival of larvae was affected negatively when reared on the novel host plant, Sitka spruce, versus the natal plant (oak or heather) but oak and heather-sourced insects did not differ in survivorship on Sitka spruce. 4. Host range extension into novel environments has resulted in population differentiation to the local climate, demonstrating that host shifts pose challenges to the herbivore population greater than those offered by the host plant alone. The hypothesis that Sitka spruce feeding populations have arisen predominantly from moorland feeding populations was not supported. [source] Community Participatory Ecological Art and EducationINTERNATIONAL JOURNAL OF ART & DESIGN EDUCATION, Issue 1 2009Young Imm Kang Song This paper presents a phenomenological case study on ecological artist Lynne Hull by investigating the connections between ecological art, nature, and education. The research examines Hull's ,positive gesture towards the Earth' as conceptualized in her work of creating habitats for wildlife (Hull, 2004, para 1). It illustrates how she seeks to inspire changes in human behaviour through her artwork in addition to developing action steps based on her works. Through an examination of Hull's work, the researcher explores how ecological art can inspire environmental education by presenting innovative ways of thinking about existing concepts. The paper discusses how educators can incorporate inquiries about ecological art into the school curriculum. Furthermore, it considers ways in which educators can adopt Hull's art-making processes and integrate these into the curriculum. It argues that educators can help students to interact with these artworks and develop their own creative processes in a meaningful way that involves art, aesthetics, and nature , all of which may raise students' consciousness about the environment in themselves and others. Ultimately, appreciating the elements of nature and their connection to the aesthetic can become a vehicle for raising awareness about broader [source] Social marketing in action,geodemographics, alcoholic liver disease and heavy episodic drinking in Great BritainINTERNATIONAL JOURNAL OF NONPROFIT & VOLUNTARY SECTOR MARKETING, Issue 3 2007Jane Powell This paper explores the use of geodemographic population classifications to identify and predict ,hotspots' of Great Britain (England, Scotland and Wales) prone to greater than expected alcoholic liver disease. MOSAIC geodemographic codes were overlaid onto Hospital Episode Statistics (HES) for Great Britain. The HES data included gender, MOSAIC Type, MOSAIC Code, postal and local authority district, month and year of birth, ethnic origin, Primary Care Trust and GP code. Analysis demonstrated that some geodemographic classifications of the population were over-represented for alcoholic liver disease episodes. These groups had low socio-economic and socio-cultural status, lived in areas of high deprivation and disadvantage. Manchester followed by Liverpool and Hull had the highest estimated patient group size in England and Hart, Surrey Heath and Wokingham the three lowest (indicating low expected levels of alcoholic liver disease compared with average). Analysis of the same data was also carried out at postcode level for Manchester indicating ,hotspots' for alcoholic level disease at street level. This analysis exemplifies the ways in which geodemographic data might be usefully applied to routine health service data to enhance service planning, delivery and improved targeting of information in harder to reach populations. Copyright © 2007 John Wiley & Sons, Ltd. [source] Optimal control theory for applications, David G. Hull, Springer, New York, 2003, 381pp. $80.00 ISBN 0-387-40070-2INTERNATIONAL JOURNAL OF ROBUST AND NONLINEAR CONTROL, Issue 17 2005Prof. Yiyuan J. Zhao No abstract is available for this article. [source] The Enchantment of Stanley SpencerNEW BLACKFRIARS, Issue 1034 2010Keith Tester Abstract In the early 1930s the artist Stanley Spencer committed himself to working on the never-achieved Church-House project. It was intended to reflect his understanding of God and religion as love, and, furthermore, of the sacred being fully integrated in secular times and places. The first painting he finished for the project was,Villagers and Saints,(1933), now in the collection of the University of Hull. This paper uses,Villagers and Saints,as a way into a reading of Spencer's work, drawing on insights from Charles Taylor's,A Secular Age,to explore how Spencer sacramentalises the material world. The first part of the paper contextualises,Villagers and Saints, and the second part identifies its vision with what appears to have been a conversion experience, discussed by Spencer in his public writing. [source] Latest news and product developmentsPRESCRIBER, Issue 5 2008Article first published online: 3 APR 200 Newer antidepressants no better than placebo? A new meta-analysis suggests that newer antidepressants are no superior to placebo in most patients with depression , the exception being those with very severe depression, who can expect a small benefit. Writing in the online-only open access journal PLoS Medicine (5:e45.doi:10.1371/ journal.pmed.0050045), researchers from Hull and the US analysed published and unpublished trials submitted to the Food and Drug Administration in marketing applications for fluoxetine, paroxetine, venlafaxine (Efexor) and nefazodone (no longer available). Using the Hamilton Rating Scale for Depression (HRSD) score as an endpoint, meta-analysis of 35 trials involving 5133 patients and lasting six to eight weeks showed that mean HRSD score improved by 9.6 points with drug treatment and 7.8 with placebo. The authors say the difference of 1.8 was statistically significant but below the criterion for clinical significance (3.0) set by NICE in its clinical guideline on depression. A review of the study by the NHS Knowledge Service (www.nhs.uk) points out that it omits trials published after the drugs were licensed (1999) and those not sponsored by the pharmaceutical industry. It did not include any patients with severe depression and only one trial in patients with moderate depression. An earlier US study of data submitted to the FDA (N Eng J Med 2008;358:25260) showed that published trials of antidepressants were more likely to be positive (37/38) than unpublished ones (3/25). Further, FDA analysts concluded that 51 per cent of trials (published and unpublished) demonstrated positive findings compared with 94 per cent of those that were published. Audit reveals variations in hospital psoriasis care There are unacceptably large variations in the quality of care for patients with psoriasis in UK hospitals, a report by the British Association of Dermatologists and the Royal College of Physicians reveals. The audit of 100 hospital units found that 39 per cent restricted access to biological therapies because of cost, and over one-third of pharmacies could not supply ,specials' such as topical coal tar preparations. More positively, the units are adequately resourced to provide timely communication with GPs. RCGP responds to Public Accounts Committee The Royal College of General Practitioners has agreed with the Commons Public Accounts Committee that drug package labelling should include the cost of the medication. The suggestion was made by the Committee in its report Prescribing Costs in Primary Care. While recognising the importance of generic prescribing, the RCGP cautions against frequent medication switches because it may unsettle patients. ,Any changes must be carried out for sound clinical reasons with good communication between GPs and their patients,' it adds. Statins for patients with kidney disease? Statins reduce cardiovascular risk in people with chronic kidney disease, a new study suggests, but their effects on renal function remain unclear (BMJ 2008; published online doi: 10.1136/bmj. 39472.580984.AE). The meta-analysis of 50 trials involving a total of 30 144 patients found that statins reduced lipids and cardiovascular events regardless of the severity of kidney disease. However, all-cause mortality was unaffected and, although proteinuria improved slightly, there was no change in the rate of decline of glomerular filtration rate. An accompanying editorial (BMJ 2008; published online doi:10.1136/ bmj.39483.665139.80) suggests that the indications for statin therapy to reduce cardiovascular risk in patients with chronic kidney disease should be the same as for those with normal renal function. New NICE guidance New clinical guidelines from NICE (see New from NICE, pages 14,15) include the diagnosis and management of irritable bowel syndrome in adults in primary care, the care and management of osteoarthritis in adults, and the diagnosis and treatment of prostate cancer. In a public health guideline on smoking cessation services, NICE endorses the use of nicotine replacement patches for 12,17 year olds. Suspect additives in children's medicines The Food Commission (www.foodcomm.org.uk) has drawn attention to the presence in children's medicines of food additives it says are linked with hyperactivity. The Commission, a national nonprofit organisation campaigning for ,the right to safe, wholesome food', says that seven common additives (including tartrazine, sodium benzoate and Ponceau 4R) are associated with hyperactivity in susceptible children. Checking the SPCs, it found that 28 of 70 children's medicines , including formulations of paracetamol, ibuprofen, amoxicillin, erythromycin and codeine phosphate throat linctus , contain at least one suspect additive. Digoxin may increase mortality in AF patients An observational study has suggested that digoxin may increase deaths in patients with atrial fibrillation (Heart 2008;94:191,6). The study was a planned subgroup analysis of a trial evaluating anticoagulant therapy in 7329 patients with atrial fibrillation. Of these, 53 per cent were treated with digoxin. Mortality was significantly higher among digoxin users than nonusers (4.22 vs 2.66 per cent per year); myocardial infarction and other vascular deaths (but not stroke, systemic embolic episodes and major bleeding events) were significantly more frequent with digoxin. Poor communications cause readmission Elderly hospital patients are often discharged with inadequate information or arrangements for care, causing almost three-quarters to be readmitted within a week, say investigators from Nottingham (Qual Safety Health Care 2008;17:71,5). Retrospective review of records for 108 consecutive patients aged over 75 found that readmission was related to medication in 38 per cent and, of these, 61 per cent were considered avoidable. Almost two-thirds had no discharge letter or were readmitted before the letter was typed; two-thirds of discharge letters had incomplete documentation of medication changes. Copyright © 2008 Wiley Interface Ltd [source] How Networks Explain Unintended Policy Implementation Outcomes: The Case of UK Rail PrivatizationPUBLIC ADMINISTRATION, Issue 4 2001Andrew Grantham How a government secures the implementation of its policies is one of the most interesting processes in public administration. The tendency of scholars is to ignore implementation and how it impacts on the form of policy, something which invariably changes once resources have been allocated to implementing agencies and the policy detail is addressed. Traditional ,top-down' (Pressman and Wildavsky 1984, Mazmanian and Sabatier 1981) and ,bottom-up' (Elmore 1979, Hjern and Porter 1981, Hull and Hjern 1983) analytical frameworks give only a partial explanation of outcomes. In making the case for a netwrok approach, a typology of implementation networks is presented. The utility of this typology is evaluated in the context of one of the most complex privatization programmes attempted by any government: the privatization of British Rail (BR) between 1992 and 1997. In the case of the sale of one BR subsidiary train operating company, ScotRail, a variety of agencies with competing interests and acting in a politically-charged climate exchanged essential resources to deliver the policy, though not without generating unintended outcomes in the form of significant change to the policy and the agencies charged with implementing it. [source] Baptism on Account of the Dead (1 Cor 15:29): An Act of Faith in the Resurrection , By Michael F. HullRELIGIOUS STUDIES REVIEW, Issue 1 2007David W. Kuck No abstract is available for this article. [source] Prediction-based estimating functionsTHE ECONOMETRICS JOURNAL, Issue 2 2000Michael Sørensen A generalization of martingale estimating functions is presented which is useful when there are no natural or easily calculated martingales that can be used to construct a class of martingale estimating functions. An estimating function of the new type, which is based on linear predictors, is called a prediction-based estimating functions. Special attention is given to classes of prediction-based estimating functions given by a finite-dimensional space of predictors. It is demonstrated that such a class of estimating functions has most of the attractive properties of martingale estimating functions. In particular, a simple expression is found for the optimal estimating function. This type of prediction-based estimating functions only involve unconditional moments, in contrast to the martingale estimating functions where conditional moments are required. Thus, for applications to discretely observed continuous time models, a considerably smaller amount of simulation is, in general, needed for these than for martingale estimating functions. This is also true of the optimal prediction-based estimating functions. Conditions are given that ensure the existence, consistency and asymptotic normality of the corresponding estimators. The new method is applied to inference for sums of Ornstein,Uhlenbeck-type processes and stochastic volatility models. Stochastic volatility models are studied in considerable detail. It is demonstrated that for inference about models by Hull and White and Chesney and Scott, an explicit optimal prediction-based estimating function can be found so that no simulations are needed. [source] Friends of Liberty: Thomas Jefferson, Tadeusz Kosciuszko, and Agrippa Hull; A Tale of Three Patriots, Two Revolutions, and a Tragic Betrayal of Freedom in the New Nation by Gary B. Nash & Graham Russell Gao HodgesTHE JOURNAL OF AMERICAN CULTURE, Issue 3 2008Ray B. Browne No abstract is available for this article. [source] The Hull and White Model of the Short Rate: An Alternative Analytical RepresentationTHE JOURNAL OF FINANCIAL RESEARCH, Issue 4 2002Dwight Grant Abstract Hull and White extend Ho and Lee's no-arbitrage model of the short interest rate to include mean reversion. This addition eliminates the problem of negative interest rates and has found wide application. To implement their model, Hull and White employ a sequential search process to identify the mean interest rate in a trinomial lattice at each date. In this article we extend Hull and White's work by developing an analytical solution for the mean interest rate at each date. This solution applies equally well to trinomial lattices, interest rate trees, and Monte Carlo simulation. We illustrate the analytical result by applying it to an example originally used by Hull and White and then for valuing an option on a bond. [source] Community Participatory Ecological Art and EducationINTERNATIONAL JOURNAL OF ART & DESIGN EDUCATION, Issue 1 2009Young Imm Kang Song This paper presents a phenomenological case study on ecological artist Lynne Hull by investigating the connections between ecological art, nature, and education. The research examines Hull's ,positive gesture towards the Earth' as conceptualized in her work of creating habitats for wildlife (Hull, 2004, para 1). It illustrates how she seeks to inspire changes in human behaviour through her artwork in addition to developing action steps based on her works. Through an examination of Hull's work, the researcher explores how ecological art can inspire environmental education by presenting innovative ways of thinking about existing concepts. The paper discusses how educators can incorporate inquiries about ecological art into the school curriculum. Furthermore, it considers ways in which educators can adopt Hull's art-making processes and integrate these into the curriculum. It argues that educators can help students to interact with these artworks and develop their own creative processes in a meaningful way that involves art, aesthetics, and nature , all of which may raise students' consciousness about the environment in themselves and others. Ultimately, appreciating the elements of nature and their connection to the aesthetic can become a vehicle for raising awareness about broader [source] Hardware-Accelerated Rendering of Photo HullsCOMPUTER GRAPHICS FORUM, Issue 3 2004Ming Li This paper presents an efficient hardware-accelerated method for novel view synthesis from a set of images or videos. Our method is based on the photo hull representation, which is the maximal photo-consistent shape. We avoid the explicit reconstruction of photo hulls by adopting a view-dependent plane-sweeping strategy. From the target viewpoint slicing planes are rendered with reference views projected onto them. Graphics hardware is exploited to verify the photo-consistency of each rasterized fragment. Visibilities with respect to reference views are properly modeled, and only photo-consistent fragments are kept and colored in the target view. We present experiments with real images and animation sequences. Thanks to the more accurate shape of the photo hull representation, our method generates more realistic rendering results than methods based on visual hulls. Currently, we achieve rendering frame rates of 2,3 fps. Compared to a pure software implementation, the performance of our hardware-accelerated method is approximately 7 times faster. Categories and Subject Descriptors (according to ACM CCS): CR Categories: I.3.3 [Computer Graphics]: Picture/Image Generation; I.3.7 [Computer Graphics]: Three-Dimensional Graphics and Realism. [source] Progressive Hulls for Intersection ApplicationsCOMPUTER GRAPHICS FORUM, Issue 2 2003Nikos Platis Abstract Progressive meshes are an established tool for triangle mesh simplification. By suitably adapting the simplification process, progressive hulls can be generated which enclose the original mesh in gradually simpler, nested meshes. We couple progressive hulls with a selective refinement framework and use them in applications involving intersection queries on the mesh. We demonstrate that selectively refinable progressive hulls considerably speed up intersection queries by efficiently locating intersection points on the mesh. Concerning the progressive hull construction, we propose a new formula for assigning edge collapse priorities that significantly accelerates the simplification process, and enhance the existing algorithm with several conditions aimed at producing higher quality hulls. Using progressive hulls has the added advantage that they can be used instead of the enclosed object when a lower resolution of display can be tolerated, thus speeding up the rendering process. ACM CSS: I.3.3 Computer Graphics,Picture/Image Generation, I.3.5 Computer Graphics,Computational Geometry and Object Modeling, I.3.7 Computer Graphics,Three-Dimensional Graphics and Realism [source] Characterization of Pectins and Some Secondary Compounds from Theobroma cacao HullsJOURNAL OF FOOD SCIENCE, Issue 5 2001M. Arlorio ABSTRACT This paper describes the chemical characterization of cocoa hulls, a potential source of high-methoxyl pectins (HMP). The content of some antinutritive compounds and potentially toxic compounds is also reported. Use of 2-propanol is proposed for the preliminary clean-up of the hulls and for the washing of the gel. Antinutritive and potentially toxic compounds seem not to limit the use of cocoa hulls. Lindane and ochratoxin A were easily removed together with fat using 2-propanol during preliminary clean up. The pectins (partially purified, yield: 1.29 ± 0.08%) showed a high methoxylation degree (%DE) of 60.53 ± 6.09%, and a viscosity of 16,200 cPs (5 rpm 20 °C). Washing procedures permit the decrease of the gel acidity from pH 1.97 to pH 3.76. [source] New Stigmastane Steroids Constituents from Rice Hulls of Oryza sativa and Inhibitory Activity on Radish SeedCHEMINFORM, Issue 21 2006Ill-Min Chung Abstract ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract, please click on HTML or PDF. [source] Interactive Cover Design Considering Physical ConstraintsCOMPUTER GRAPHICS FORUM, Issue 7 2009Yuki Igarashi Abstract We developed an interactive system to design a customized cover for a given three-dimensional (3D) object such as a camera, teapot, or car. The system first computes the convex hull of the input geometry. The user segments it into several cloth patches by drawing on the 3D surface. This paper provides two technical contributions. First, it introduces a specialized flattening algorithm for cover patches. It makes each two-dimensional edge in the flattened pattern equal to or longer than the original 3D edge; a smaller patch would fail to cover the object, and a larger patch would result in extra wrinkles. Second, it introduces a mechanism to verify that the user-specified opening would be large enough for the object to be removed. Starting with the initial configuration, the system virtually "pulls" the object out of the cover while avoiding excessive stretching of cloth patches. We used the system to design real covers and confirmed that it functions as intended. [source] Hierarchical Convex Approximation of 3D Shapes for Fast Region SelectionCOMPUTER GRAPHICS FORUM, Issue 5 2008Marco Attene Abstract Given a 3D solid model S represented by a tetrahedral mesh, we describe a novel algorithm to compute a hierarchy of convex polyhedra that tightly enclose S. The hierarchy can be browsed at interactive speed on a modern PC and it is useful for implementing an intuitive feature selection paradigm for 3D editing environments. Convex parts often coincide with perceptually relevant shape components and, for their identification, existing methods rely on the boundary surface only. In contrast, we show that the notion of part concavity can be expressed and implemented more intuitively and efficiently by exploiting a tetrahedrization of the shape volume. The method proposed is completely automatic, and generates a tree of convex polyhedra in which the root is the convex hull of the whole shape, and the leaves are the tetrahedra of the input mesh. The algorithm proceeds bottom-up by hierarchically clustering tetrahedra into nearly convex aggregations, and the whole process is significantly fast. We prove that, in the average case, for a mesh of n tetrahedra O(n log2 n) operations are sufficient to compute the whole tree. [source] Differentiation in seed hoarding among three sympatric rodent species in a warm temperate forestINTEGRATIVE ZOOLOGY (ELECTRONIC), Issue 2 2008Jiqi LU Abstract Although seed hoarding by rodents has been extensively studied, differentiation in seed-hoarding behaviors among sympatric rodent species has not been well investigated. Using semi-natural enclosures, we demonstrated that three sympatric rodent species showed clear differentiation in food selection, scatter versus larder hoarding behaviors and eating behaviors when offered seeds of four plant species from a warm temperate forest in northern China. The large field mouse Apodemus peninsulae preferred seeds of wild apricot (Prunus armeniaca) and Liaodong oak (Quercus liaotungensis), whereas the Chinese white-bellied rat Niviventor confucianus preferred seeds of cultivated walnut and Liaodong oak, and the David's rock squirrel Sciurotamias davidianus preferred seeds of cultivated walnut, wild apricot and Liaodong oak. All three rodents showed larder hoarding of seeds from all four plant species, but the large field mouse showed scatter hoarding of wild apricot, and the David's rock squirrel showed scatter hoarding of Liaodong oak and wild walnut. Acorns of Liaodong oak, which have a soft seed hull, were more often eaten in situ, whereas wild walnuts, which have a hard seed hull and more tannin, were less hoarded by all rodent species. Differentiation in the scatter versus larder hoarding behaviors of sympatric rodent species suggests that sympatric rodents play different roles in the regeneration of different sympatric plant species. [source] Designing the 9th-Century-AD Vessel from Bozburun, TurkeyINTERNATIONAL JOURNAL OF NAUTICAL ARCHAEOLOGY, Issue 2 2009Matthew Harpster During the study of the 9th-century-AD vessel from Bozburun, Turkey, this author applied Richard Steffy's methodology which emphasizes the comprehensive deconstruction and step-by-step re-assembly of a vessel. This methodology, in turn, illuminated how the Bozburun ship was assembled and designed, and how this design process created particular components of the hull. This article discusses this design process, and how by understanding it we may also understand more about the people who made the Bozburun vessel. © 2009 The Author [source] The Earliest Naval RamINTERNATIONAL JOURNAL OF NAUTICAL ARCHAEOLOGY, Issue 2 2008Samuel Mark Analyses of the Kuyunjik (Kouyunjik) relief and other data suggest Phoenicia probably did not build ships with rams before the Battle of Salamis. A review of Greek literature, iconography, and archaeology suggests the naval ram may have been a Greek invention, appearing at the earliest in the 6th century BC and possibly as late as the 5th century. Its evolution may have led to a shift from laced to pegged mortise-and-tenon joinery in Greek shipbuilding as well as the development of the wineglass-shaped hull and heavier framing. It may also have influenced the development of large-scale bronze-casting in Greece. © 2008 The Author [source] The Arade 1 Shipwreck: Preliminary Results of the 2004 and 2005 Field SeasonsINTERNATIONAL JOURNAL OF NAUTICAL ARCHAEOLOGY, Issue 2 2008Vanessa Loureiro Lost after partial destruction by dredging in 1970, Arade 1 was a priority for the Centro Nacional de Arqueologia Náutica e Subaquática (CNANS). The upper part of the hull, lying over a 7-m-long area of the bed of the Arade river, was fully observed and recorded during the first two seasons (2001 and 2002) and dismantled in a third phase (2003). The 2004 and 2005 seasons aimed at the excavation, full recording and dismantling of the lower hull, briefly observed at the end of 2002. This second, detached, portion of the hull, was buried in the sediment and corresponds to midships. © 2008 The Authors [source] The Tantura F Shipwreck, IsraelINTERNATIONAL JOURNAL OF NAUTICAL ARCHAEOLOGY, Issue 1 2007Ofra Barkai Tantura F is the first wreck excavated so far in the eastern Mediterranean dated to the beginning of the 8th century AD (the local early Islamic period), based on 14C and pottery analysis. Among the finds were the remains of about 30 ceramic vessels, two anchors, food remnants, fish-bones, a needle, a spoon and a glass vessel. Tantura F was c.15 m long and 5 m wide, and hull remains comprise keel, frames, planks, stringers, mast-step, and other internal components. Construction features clearly indicate frame-based construction, considerably earlier than it is generally thought to have been first employed. © 2006 The Authors [source] To be and to continue being a cog: the conservation of the Bremen Cog of 1380INTERNATIONAL JOURNAL OF NAUTICAL ARCHAEOLOGY, Issue 1 2001Per Hoffmann The conservation project for the Bremen Cog of 1380 took 38 years from salvage to presentation of the ship to the public in the Deutsches Schiffahrtsmuseum in 2000. The ship was salvaged from the River Weser in about 2000 pieces, and stored in water tanks. A new museum was built, and the Cog reassembled from the waterlogged timbers. The ship was reconstructed with most of the weight being taken by the ceiling of the hall via a steel-rod hanging system. Then a conservation tank was built around the hull, and a novel two-step PEG-treatment applied, especially developed for the Cog. In two consecutive baths PEG 200 and PEG 3000 stabilized lesser degraded and heavily degraded wood against shrinkage, splitting, and warping. After cleaning, the wood looks dark brown, dry, and natural. The extraordinary project is regarded a success. [source] To be or not to be a cog: the Bremen Cog in perspectiveINTERNATIONAL JOURNAL OF NAUTICAL ARCHAEOLOGY, Issue 2 2000Ole Crumlin-Pedersen Following on from Thijs Maarleveld's paper in 1995 on type-names for archaeological finds of ships, the use of the term cog has been questioned by Timm Weski, who suggested the archaeological term Ijsselmeer-type instead. The present paper surveys a total of 18 ship-finds of this type with respect to date, origin and year of investigation, without finding support for the proposed change in terminology. Instead, the archaeological term cog should be restricted to seagoing vessels of the 12th,15th centuries which share the structural features of the lower part of hull with the Bremen Cog. Recent results of dendroanalysis point to the root of the Jutland peninsula as a more likely area than the former Zuiderzee for the transformation of a hypothetical older,proto-cog'-type for navigation on rivers and in the Waddensee into the proper seagoing medieval cog-type. Impulses for this transformation were found, most likely, in the need to circumnavigate Cape Skagen already in the 12th century, and technical features were probably taken over from large Scandinavian cargo ships of that period. © 2000 The Nautical Archaeology Society [source] An application of dynamic positioning control using wave feed forwardINTERNATIONAL JOURNAL OF ROBUST AND NONLINEAR CONTROL, Issue 13 2001A. B. Aalbers Abstract The paper presents the results of model tests for a large tanker in which wave drift force feed forward was applied in the dynamic positioning control system. The estimation method of the nonlinear (second order) wave drift forces from the measurement of relative water motions at the side of a ship hull is presented. The estimated wave drift forces are used in the DP control system, to enhance the filter process of the extended Kalman filter, and in the required thruster set-points. The EKF uses the nonlinear equations of low-frequency ship motions on the horizontal plane, which are also presented. The results of the model tests show that the use of wave drift force feed forward significantly improves the positioning accuracy in sea states with 3.5 m significant wave height or higher. Copyright © 2001 John Wiley & Sons, Ltd. [source] Inter-relationships Amongst Grain Characteristics, Grain-Filling Parameters and Rice (Oryza sativa L.) Milling QualityJOURNAL OF AGRONOMY AND CROP SCIENCE, Issue 4 2001S. Jongkaewwattana Resistance to breakage is a desirable trait of the rice kernel. Many factors, such as the genetics of the cultivar, the plant growth environment and the conditions of the milling process, will affect kernel breakage. Although many papers have discussed the factors that may affect and improve rice milling quality, few have related the grain-filling process to head rice, the unbroken polished kernels obtained after milling. The objectives of this paper were: (i) to characterize the interrelationships amongst grain filling and grain structural characteristics; (ii) to determine whether the grain-filling process and grain characteristics affect head rice, and (iii) to suggest a pathway through which grain characteristics can influence head rice recovery. An analysis of the interrelationships amongst all grain characteristics suggested that variables of grain structure (size, volume and per cent hull) have a decisive influence on the grain-filling process (rate and duration of grain filling). The grain-filling process will affect final grain traits such as weight and density, which in turn will have a direct impact on head rice. In addition, non-uniformity, whether expressed in terms of variable grain size and shape or grain filling and maturity, has a detrimental effect on rice milling quality. The implication of these findings is that rice breeders need to pay more attention to selecting plant types that have a high degree of uniformity of grain characteristics on the panicle, and to those traits (such as greater grain size, weight and density) that have a positive impact on yield and milling quality. Beziehungen zwischen Korneigenschaften, Kornfüllungsparametern und Reis (Oryza sativa L.)-Vermahlungsqualität Bruchresistenz von Reiskörnern ist eine wünschenswerte Eigenschaft. Viele Faktoren, wie Genetik, Umwelt des Pfanzenwachstums und Voraussetzungen der Vermahlung, beeinflussen die Bruchresistenz der Körner. Obwohl viele Veröffentlichungen die Faktoren diskutieren, die die Mahlqualität beinträchtigen oder verbessern, beziehen sich nur wenige auf den Kornfüllungsvorgang zu ungebrochenen polierten Körner nach dem Mahlvorgang. Ziel der Untersuchungen war es: zu charakterisieren die Beziehungen zwischen Kornfüllung und Kornstruktur; zu bestimmen, ob der Kornfüllungsprozess und Korneigenschaften die Bruchresistenz von Reis beeinflussen können; und vorzuschlagen eine Behandlung durch die Korneigenschaften die Wiedergewinnung von Bruchreis beieinflußt werden kann. Eine Analyse der Beziehungen zwischen den Korneigenschaften weist darauf hin, dass Variable der Kornstruktur (Größe, Umfang und Antiel der Schale) einen deutlichen Einfluß auf den Kornfüllungsprozess haben (Rate und Dauer der Kornfüllung). Der Kornfüllungsprozess beeinflußt Korngewicht und Korndichte, die eine unmittelbare Auswirkung auf ungebrochene Körner nach dem Mahlvorgang haben. Auch Uneinheitlichkeit in Korngröße und Kornform oder Kornfüllung und Kornreife haben einen ungünstigen Einfluß auf die Vermahlungsqualität von Reis. Hieraus ergibt sich der Hinweis, daß Reiszüchter in der Selketion auf einen hohen Grad von Einheitlichkeit der Körner der Rispe und deren Eigenschaften (hohe Korngröße, Korngewicht und Korndichte), die einen Einfluß auf Ertrag und Mahlqualität haben, achten sollten. [source] Production of gliotoxin on natural substrates by Trichoderma virensJOURNAL OF BASIC MICROBIOLOGY, Issue 1 2005R. Anitha Dr. Gliotoxin, an epithiodiketopiperazine toxin produced by the ,Q' strain of Trichoderma virens is essential for curtailing growth and multiplication of phytopathogens (Howellet al. 1993, Fravel 1988). Three isolates (Gv, Gv-A and Gv-V) of Trichoderma virens were grown on natural substrates such as bengal gram hull, gingelly cake, green gram hull, rice bran, soya meal, sugarcane bagasse, soyameal + tapioca, tapioca powder, tapioca peel and wheat bran). It was evident from this study that maximum gliotoxin (64 mg/l) was produced on tapioca powder by the alien isolate Gv. However sugarcane bagasse significantly enhanced gliotoxin production (36 mg/l) in the native isolate Gv-A, when compared to other substrates like greengram hull and rice bran. So far, studies on production of gliotoxin on synthetic media has been reported. We report the production of gliotoxin by T. virens on natural substrates "in vitro" for the first time. (© 2005 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [source] | |||||||||||||||||||||||||||||||||||||||||||||||||