Home About us Contact
|
Home About us Contact | ||
|
|
||
Homogeneous Distribution (homogeneous + distribution)
Selected AbstractsCorrelation of Ultrastructure with Mechanical Properties of Nano-Hybrid Dental Composites,ADVANCED ENGINEERING MATERIALS, Issue 10 2009Lena Schmitt Determination of mechanical properties of nano-hybrid dental composites leads to strong correlation to material's ultrastructure. Not only does total filler content in percentage of weight affect the mechanical properties, but the combination of optimal filler size and shape with homogeneous distribution of filler particles and an optimal amount of different sized fillers in finally cured dental composites lead to desired mechanical and thermo-mechanical properties. [source] Pattern Formation of Silver Nanoparticles in 1-, 2-, and 3D Microstructures Fabricated by a Photo- and Thermal Reduction MethodADVANCED FUNCTIONAL MATERIALS, Issue 14 2010Jong-Jin Park Abstract One-, two-, and three-dimensional microstructures with dispersed silver nanoparticles are fabricated by a combination of photopatterning and thermal treatment from a silver salt containing photosensitive epoxy resin. Ultraviolet photo-irradiation and subsequent thermal treatment are combined to control the rate of silver salt reduction, the size and the arrangement of nanoparticles, as well as the reticulation of the epoxy resin. This approach allows the creation of high resolution 1-, 2-, and 3D patterns containing silver nanoparticles, with a homogeneous distribution of nanoparticles regardless of the irradiated area. [source] Interaction between wind-induced seiches and convective cooling governs algal distribution in a canyon-shaped reservoirFRESHWATER BIOLOGY, Issue 7 2007RAFAEL MARCÉ Summary 1. Wind is considered the dominant factor controlling phytoplankton distribution in lentic environments. In canyon-shaped reservoirs, wind tends to blow along the main axis generating internal seiches and advective water movements that jointly with biological features of algae can produce a heterogeneous phytoplankton distribution. Turbulence generated by wind stress and convection will also affect the vertical distribution of algae, depending on their sinking properties. 2. We investigated the vertical and horizontal distribution of phytoplankton during the stratification period in Sau Reservoir (NE Spain). Sites along the main reservoir axis were sampled every 4 h for 3 days, and profiles of chlorophyll- a and temperature were made using a fluorescent FluoroProbe, which can discriminate among the main algal groups. Convective and wind shear velocity scales, and energy dissipation were calculated from meteorological data, and simulation experiments were performed to describe non-measured processes, like vertical advection and sinking velocity of phytoplankton. 3. Wind direction changed from day to night, producing a diel thermocline oscillation and an internal seiche. Energy dissipation was moderate during the night, and mainly attributed to convective cooling. During the day the energy dissipation was entirely attributed to wind shear, but values indicated low turbulence intensity. 4. The epilimnetic algal community was mainly composed of diatoms and chlorophytes. Chlorophytes showed a homogeneous distribution on the horizontal and vertical planes. Diatom horizontal pattern was also homogeneous, because the horizontal advective velocities generated by wind forcing were not high enough to develop phytoplankton gradients along the reservoir. 5. Diatom vertical distribution was heterogeneous in space and time. Different processes dominated in different regions of the reservoir, due to the interaction between seiching and the daily cycle of convective-mediated turbulence. As the meteorological forcing followed a clear daily pattern, we found very different diatom sedimentation dynamics between day and night. Remarkably, these dynamics were asynchronous in the extremes of the seiche, implying that under the same meteorological forcing a diatom population can show contrasting sedimentation dynamics at small spatial scales (approximately 103 m). This finding should be taken into account when interpreting paleolimnological records from different locations in a lake. 6. Vertical distribution of non-motile algae is a complex process including turbulence, vertical and horizontal advection, variations in the depth of the mixing layer and the intrinsic sinking properties of the organisms. Thus, simplistic interpretations considering only one of these factors should be regarded with caution. The results of this work also suggest that diatoms can persist in stratified water because of a synergistic effect between seiching and convective turbulence. [source] Dye-Doped Polyhedral Oligomeric Silsesquioxane (POSS)-Modified Polymeric Matrices for Highly Efficient and Photostable Solid-State LasersADVANCED FUNCTIONAL MATERIALS, Issue 20 2009Roberto Sastre Abstract Here, the design, synthesis, and characterization of laser nanomaterials based on dye-doped methyl methacrylate (MMA) crosslinked with octa(propyl-methacrylate) polyhedral oligomeric silsesquioxane (8MMAPOSS) is reported in relation to their composition and structure. The influence of the silicon content on the laser action of the dye pyrromethene 567 (PM567) is analyzed in a systematic way by increasing the weight proportion of POSS from 1 to 50%. The influence of the inorganic network structure is studied by replacing the 8MMAPOSS comonomer by both the monofunctionalized heptaisobutyl-methacryl-POSS (1MMAPOSS), which defines the nanostructured linear network with the POSS cages appearing as pendant groups of the polymeric chains, and also by a new 8-hydrogenated POSS incorporated as additive to the polymeric matrices. The new materials exhibit enhanced thermal, optical, and mechanical properties with respect to the pure organic polymers. The organization of the molecular units in these nanomaterials is studied through a structural analysis by solid-state NMR. The domain size of the dispersed phase assures a homogeneous distribution of POSS into the polymer, thus, a continuous phase corresponding to the organic matrix incorporates these nanometer-sized POSS crosslinkers at a molecular level, in agreement with the transparency of the samples. The silicon,oxygen core framework has to be covalently bonded into the polymer backbone instead of being a simple additive and both the silica content and crosslinked degree exhibit a critical influence on the laser action. [source] Nanoparticle Coating for Advanced Optical, Mechanical and Rheological Properties,ADVANCED FUNCTIONAL MATERIALS, Issue 16 2007F. Hakim Abstract Primary titania nanoparticles were coated with ultrathin alumina films using Atomic Layer Deposition (ALD). The deposited films were highly uniform and conformal with an average growth rate of 0.2,nm per coating cycle. The alumina films eliminated the surface photocatalytic activity of titania nanoparticles, while maintained their original extinction efficiency of ultraviolet light. Deposited films provided a physical barrier that effectively prevented the titania surface from oxidizing organic material whereas conserving its bulk optical properties. Parts fabricated from coated powders by pressureless sintering had a 13,% increase in surface hardness over parts similarly fabricated from uncoated particles. Owing to its homogeneous distribution, the secondary alumina phase suppressed excessive grain growth. Alumina films completely reacted during sintering to form aluminum titanate composites, as verified by XRD. Coated particles showed a pseudoplastic behavior at low shear rates due to modified colloidal forces. This behavior became similar to the Newtonian flow of uncoated nanoparticle slurries as the shear rate increased. Suspensions of coated particles also showed a decreased viscosity relative to the viscosity of uncoated particle suspensions. [source] Different structural components of conventional papillary thyroid carcinoma display mostly identical BRAF statusINTERNATIONAL JOURNAL OF CANCER, Issue 1 2007Alexander Abrosimov Abstract Activating BRAFT1799A mutation is closely associated with a papillary thyroid carcinoma (PTC) histotype. The transversion is frequently detected in the conventional type, Warthin-like and tall cell variants, but is rare in the follicular variant of PTC. Conventional PTC is often presented with tumors of mixed architecture, which besides the papillary structures also contain areas with follicular and solid morphology in which the details of BRAF mutational status are unknown. We set out to differentially investigate the presence of mutated BRAF in the individual structural components microdissected from 44 formalin-fixed, paraffin-embedded PTC tissues from 40 patients. The mutation was detected in at least 1 structural component in 23 tumors (52%). Different structural components of the same tumor had identical BRAF status in 41/44 tumors (93%). In 3 tumors the BRAFT1799A mutation was found only in the papillary, but not in the follicular component. Mutational patterns identical to those in the primary tumors were found in 11/12 lymph node metastases (92%, including both BRAFT1799A -positive and -negative cases). The high concordance of the BRAF mutational status in structurally distinct areas suggests a rather homogeneous distribution of neoplastic epithelial cells in a conventional PTC tumor in most cases. These results imply the reliability of preoperative molecular diagnosis of PTC regardless of the type of tumor component at the site of biopsy sampling and suggest that the majority of patients with BRAF mutation-positive PTC may benefit from the targeted pharmacotherapy. © 2006 Wiley-Liss, Inc. [source] Impact of shade on the spatial distribution of Sahlbergella singularis in traditional cocoa agroforestsAGRICULTURAL AND FOREST ENTOMOLOGY, Issue 1 2010Régis Babin 1Shade management is commonly considered to be an effective pest management strategy for cocoa mirids, yet shade management recommendations are not based on extensive knowledge of the mirid ecology in traditional cocoa agroforests. 2The main objectives of the present study were an assessment of the impact of shade on the spatial distribution of mirid populations and thus the evaluation of shade management strategies. 3Mirid densities were measured and shade was characterized for three plots located in three different agroecological zones in the Centre region of Cameroon. Mirid densities generally followed a negative binomial law. Geostatistical procedures were used to characterize spatial distribution of mirid density. Light conditions were assessed using hemispherical photography. 4Populations of Sahlbergella singularis were highly aggregated in the plots. Semivariance analysis and kriging visualized the spatial dependence of mirid densities. Clearly distinguishable mirid pockets of 20,30 adjacent infested cocoa trees were identified in two of the three plots. 5The high diversity of shade tree species and the large variability in density and size of shade trees resulted in a considerable heterogeneity of plot light conditions. Percentage transmitted light varied in the range 9.4,80.1% in the most heterogeneous plot. 6For two of the three plots, mirid pockets were aggregated in those areas where light transmission was highest. In the third plot, relatively high mirid densities and the presence of an alternative host resulted in a more homogeneous distribution. The importance of these findings for improved mirid control is discussed. [source] The influence of temporal cake moisture content on a discontinuous washing process in the centrifugal fieldAICHE JOURNAL, Issue 3 2009Franky Ruslim Abstract In solid/liquid separation processes, filter cake washing is an essential step in improving the quality of particulate products by elimination of impurities. During cake washing and dewatering, the cake saturation changes depending on the flow conditions and it cannot always be measured and controlled accurately. This article deals with investigations on the influence of the initial and temporal cake saturation on washing PVC and silica sand particles in the centrifugal field. It was found, that high initial saturation levels and high maximum saturations during the washing process had a positive impact in inducing a high hydrostatic pressure for advective flow and enabling a homogeneous distribution of the wash water inside the cake. This was achieved by increasing the wash water flux and/or decreasing the g-factor. A good method to obtain low final impurity quantity is the combination of washing at a low g-factor and dewatering at a high one. © 2009 American Institute of Chemical Engineers AIChE J, 2009 [source] Alumina/Silicon Carbide Laminated Composites by Spark Plasma SinteringJOURNAL OF THE AMERICAN CERAMIC SOCIETY, Issue 11 2009Vincenzo M. Sglavo Ceramic laminates composed of alumina/silicon carbide composite layers were produced by spark plasma sintering (SPS). Monolithic composite disks containing up to 30 vol% of silicon carbide were fabricated by stacking together and cosintering by SPS green layers prepared by tape casting water-based suspensions. An engineered laminate with a specific layer combination that is able to promote the stable growth of surface defects before final failure was also designed and produced. Fully dense materials with an optimum adhesion between the constituting layers and a homogeneous distribution of the two phases were obtained after SPS. Monolithic composites showed an increasing strength with SiC load, and biaxial strength values as high as 700 MPa were observed for a SiC content of 30 vol%. The engineered laminate showed a peculiar crack propagation that is responsible for the high strength value of about 600 MPa and for the evident insensitivity to surface defects. [source] Orientation-Selective Incorporation of Transmembrane F0F1 ATP Synthase Complex from Micrococcus luteus in Polymer-Supported MembranesMACROMOLECULAR BIOSCIENCE, Issue 11 2008Murat Tutus Abstract We report the vectorial incorporation of a highly asymmetric F0F1 ATP synthase complex from Micrococcus luteus into polymer-supported membranes. Dynamic light scattering and cryo electron microscopy confirm that the use of weak surfactants (bile acid) allows for the non-disruptive protein incorporation into lipid vesicles. Spreading of vesicles with ATP synthase onto a cellulose support results in a homogeneous distribution of proteins, in contrast to a patchy image observed on bare glass slides. The orientation of ATP synthase can be identified using an antibody to the ATP binding site as well as from topographic profiles of the surface. The method to "align" transmembrane proteins in supported membranes would open a possibility to quantify protein functions in biomimetic model systems. [source] Analysis of the Influence of Processing Conditions on the Supramolecular Structure and Antioxidant Distribution in PP-Pipes Using Infrared MicroscopyMACROMOLECULAR MATERIALS & ENGINEERING, Issue 5 2008Robert Brüll Abstract The supramolecular structure in pipe walls of isotactic PP-R is a function of compound composition and processing parameters, which both influence the mechanical properties of the pipes. µFTIR shows a gradient of the crystallinity across the pipe wall, with a lower-crystalline outer layer, and a higher-crystalline core layer. The rate of extrusion has an influence on the thickness of the outer layer. The nucleating effect on the morphological profile throughout the pipe wall can be visualised. µFTIR shows a homogeneous distribution of the primary antioxidant in the pipe wall. Both the spectral crystallinity and the antioxidant concentration distribution are calculated. [source] Magnetic properties of screen-printed (Y0.5Sm0.5)Co5 magnet arraysPHYSICA STATUS SOLIDI (A) APPLICATIONS AND MATERIALS SCIENCE, Issue 6 2007D. Bueno-Baques Abstract (Y0.5Sm0.5)Co5 magnet arrays of square ,dots of 300 ,m were prepared by screen printing. A well controlled paste like ink prepared with the (Y0.5Sm0.5)Co5 nanoparticles and a mixture of organic solvent and polymer was used to print different pattern arrays. (Y0.5Sm0.5)Co5 nanoparticles were obtained by mechanical milling starting from arc melted ingots and heat treated in Ar atmosphere. Two different heat treatment were considered, resulting in powders with different magnetic properties. The microstructure of the magnet arrays was studied by scanning electron microscopy (SEM). An isotropic homogeneous distribution of the nanoparticles inside the ,dots was observed. The final shape of the ,dots in the array was found to be highly dependent on the squeeze pressure and speed over the mesh. Magnetic properties were studied by pulsed field magnetometry and vibrating sample magnetometry at room temperature. The micro size arrays showed lower saturation magnetization and a slightly increase in the coercive field. (© 2007 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [source] Thermal and morphological properties of high-density polyethylene/ethylene,vinyl acetate copolymer composites with polyhedral oligomeric silsesquioxane nanostructurePOLYMER INTERNATIONAL, Issue 2 2010Patrícia Scapini Abstract The demand for improved properties of common polymers keeps increasing, and several new approaches have been investigated. In the study reported here, composites with a polymer matrix comprising a blend of high-density polyethylene with ethylene,vinyl acetate copolymer (EVA), and with polyhedral oligomeric silsesquioxane (POSS) as a nanostructure, were processed and characterized in terms of their thermal and morphological properties. For the preparation of the composites, the concentrations of the blend components (0, 50 and 100 wt%) and of the POSS (0, 1 and 5 wt%) were varied. X-ray diffraction results indicated that the presence of EVA in the composites led to the appearance of crystalline domains at lower POSS concentrations. Transmission and scanning electron microscopy showed that samples with 1 wt% of POSS had a homogeneous distribution in the polymer matrix with average dimensions of ca 150 nm. However, the formation of aggregates occurred in samples with 5 wt% of POSS. Differential scanning calorimetry and thermogravimetic analyses indicated that the POSS did not affect the melt and degradation temperatures of the polymer matrix. POSS underwent aggregation at higher concentrations during the composite processing, indicating a solubility limit of around 1 wt%. The presence of EVA in the composite favors POSS aggregation due to an increase in the polarity of the polymer matrix. Copyright © 2009 Society of Chemical Industry [source] Brief communication: The distribution of perikymata on Qafzeh anterior teethAMERICAN JOURNAL OF PHYSICAL ANTHROPOLOGY, Issue 1 2010Debbie Guatelli-Steinberg Abstract Recent studies have suggested that Neandertals and modern humans differ in the distribution of perikymata (enamel growth increments) over their permanent anterior tooth crowns. In modern humans, perikymata become increasingly more compact toward the cervix than they do in Neandertals. Previous studies have suggested that a more homogeneous distribution of perikymata, like that of Neandertals, characterizes the anterior teeth of Homo heidelbergensis and Homo erectus as well. Here, we investigated whether Qafzeh anterior teeth (N = 14) differ from those of modern southern Africans, northern Europeans, and Alaskans (N = 47,74 depending on tooth type) in the percentage of perikymata present in their cervical halves. Using the normally distributed modern human values for each tooth type, we calculated Z -scores for the 14 Qafzeh teeth. All but two of the 14 Qafzeh teeth had negative Z -scores, meaning that values equal to these would be found in the bottom 50% of the modern human samples. Seven of the 14 would be found in the lowest 5% of the modern human distribution. Qafzeh teeth therefore appear to differ from those of modern humans in the same direction that Neandertals do: with generally lower percentages of perikymata in their cervical regions. The similarity between them appears to represent the retention of a perikymata distribution pattern present in earlier members of the genus Homo, but not generally characteristic of modern humans from diverse regions of the world. Am J Phys Anthropol 2010. © 2009 Wiley-Liss, Inc. [source] Sample preparation effects in matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry of partially depolymerised methyl celluloseRAPID COMMUNICATIONS IN MASS SPECTROMETRY, Issue 11 2003Dane Momcilovic Methyl cellulose (MC) was partially depolymerised and the oligomers thus obtained were studied by matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI-TOFMS). The depolymerisation was either enzymatic or acidic. Fractions of enzymatically depolymerised MC were collected from size-exclusion chromatography and subjected to a sample preparation investigation. Several MALDI matrices and solvents were evaluated. The results showed that the solvent choice had a significant effect on the measured degree of substitution (DS). Aprotic solvents produced higher DS values, which was most likely due to poor solubility of species with low DS. The obtained signal intensity, however, did not correlate with the solubility but seemed to be more dependent on certain matrix/solvent combinations. All the matrices attempted produced mass spectra with sufficient signal intensity for accurate peak area calculation. The choice of matrix did not have any significant effect on the measured DS. Sample spots obtained from organic solvents had a more homogeneous distribution of the analyte and smaller crystals than those obtained from water. This increased both the reproducibility and peak resolution and in addition the analysis time was shorter. DS measurements were performed on two acidically depolymerised MCs with different nominal DS values. It was easy to distinguish between the two MCs, and the measured DS values agreed well with the values supplied by the manufacturers. Copyright © 2003 John Wiley & Sons, Ltd. [source] Acrosome Biosynthesis in Spermatocytes and Spermatids Revealed by HPA Lectin CytochemistryTHE ANATOMICAL RECORD : ADVANCES IN INTEGRATIVE ANATOMY AND EVOLUTIONARY BIOLOGY, Issue 9 2008Galder Valbuena Abstract The origin of the acrosome is controversial, because of both its lysosomal nature and at the moment of its appearance, which seems to be species-specific. Considering the amazing organization shown by the acrosome of some urodele amphibians, HPA-colloidal gold cytochemistry was used to analyze the biogenesis of the acrosome in the urodele Pleurodeles waltl at electron microscopy level. The results showed that HPA-labeling is useful to label the acrosome and its precursor vesicles and, consequently, HPA-histochemistry could be used as a marker of acrosomal content. Labeling of the Golgi apparatus and precursor vesicles was seen in primary spermatocytes and round (stage I) spermatids, thus contributing solid evidence for the beginning of acrosome biogenesis before meiosis. In both primary spermatocytes and round spermatids, an enigmatic vesicle, probably related to the biosynthesis of the neck piece or the tail, was also labeled. Labeling in elongating spermatids (stage II,IV), showed a homogeneous distribution of colloidal gold particles in the acrosomal cap, but the perforatorium was not positive to the lectin. However, in mature (stage V,VI) spermatids, a regional distribution of labeling in the acrosome was seen, with the apical knob showing a stronger labeling than the lateral barb, and the lateral barb showing a stronger labeling than the principal piece of the acrosomal cap. This regional distribution of the labeling suggests that the acrosome develops several domains with different glycoconjugate compositions. Anat Rec, 291:1097-1105, 2008. © 2008 Wiley-Liss, Inc. [source] Postnatal development of 11,-hydroxysteroid dehydrogenase type 1 in the rat hippocampusJOURNAL OF NEUROSCIENCE RESEARCH, Issue 5 2002S.L. Wan Abstract Glucocorticoids (GCs) have important actions in the hippocampus of the brain, where their access to glucocorticoid receptor (GR) is increased by 11,-hydroxysteroid dehydrogenase type 1 (11,-HSD1). 11,-HSD1 converts biologically inactive 11-dehydrocorticosterone into active corticosterone. However, the postnatal development of 11,-HSD1 in the hippocampus is not properly understood. In this study, the postnatal distribution and development of 11,-HSD1 in the hippocampus of the rat brain was studied with immunohistochemistry and Western blot analysis. Results showed that abundant 11,-HSD1 immunoreactive substance (ir-11,-HSD1) was present in the hippocampus. There were homogeneous distributions of 11,-HSD1 in the hippocampal CA1, CA2, CA3, CA4 regions and the dentate gyrus at postnatal days 1, 3, and 7. Interestingly, the developmental distribution of GR in the hippocampus followed the same pattern as 11,-HSD1. Western blot analysis demonstrated that a higher level of expression of 11,-HSD1 in the hippocampus was found in the first 2 weeks of life. The expressions of 11,-HSD1 started to drop to adult levels at about postnatal day 15 both in the hippocampus and in other brain areas. These results suggest that the higher expression of 11,-HSD1 in the neonatal hippocampus may be important for the maturation of the central nervous system mediated by GCs through GR. © 2002 Wiley-Liss, Inc. [source] | ||||||||||||||||||||||||||||