Home About us Contact
|
Home About us Contact | ||
|
|
||
Hole Transport (hole + transport)
Selected AbstractsStable, Glassy, and Versatile Binaphthalene Derivatives Capable of Efficient Hole Transport, Hosting, and Deep-Blue Light EmissionADVANCED FUNCTIONAL MATERIALS, Issue 15 2010Bin Wei Abstract Organic light-emitting diodes (OLEDs) have great potential applications in display and solid-state lighting. Stability, cost, and blue emission are key issues governing the future of OLEDs. The synthesis and photoelectronics of a series of three kinds of binaphthyl (BN) derivatives are reported. BN1,3 are "melting-point-less" and highly stable materials, forming very good, amorphous, glass-like films. They decompose at temperatures as high as 485,545,°C. At a constant current density of 25,mA,cm,2, an ITO/BN3/Al single-layer device has a much-longer lifetime (>80,h) than that of an ITO/NPB/Al single-layer device (8,h). Also, the lifetime of a multilayer device based on BN1 is longer than a similar device based on NPB. BNs are efficient and versatile OLED materials: they can be used as a hole-transport layer (HTL), a host, and a deep-blue-light-emitting material. This versatility may cut the cost of large-scale material manufacture. More importantly, the deep-blue electroluminescence (emission peak at 444 nm with CIE coordinates (0.16, 0.11), 3.23 cd A,1 at 0.21,mA cm,2, and 25200,cd,m,2 at 9,V) remains very stable at very high current densities up to 1000,mA,cm,2. [source] Modeling Electron and Hole Transport in Fluoroarene-Oligothiopene Semiconductors: Investigation of Geometric and Electronic Structure Properties,ADVANCED FUNCTIONAL MATERIALS, Issue 2 2008E. Koh Abstract A theoretical study using density functional theory is undertaken to gain insight into how the structural, electronic, and electron-transfer characteristics of three Fluoroarene-oligothiophene semiconductors influence the preferred transport of electrons versus holes in field-effect transistor applications. The intermolecular electronic coupling interactions are analyzed through both a simplified energy-splitting in dimer (ESID) model and as a function of the entire dimer Hamiltonian in order to understand the impact of site energy differences; our results indicate that these differences are generally negligible for the series and, hence, use of the ESID model is valid. In addition, we also investigate the reduction and oxidation processes to understand the magnitudes of the intramolecular reorganization energy for the charge-hopping process and expected barrier heights for electron and hole injection into these materials. From the electronic coupling and intramolecular reorganization energies, estimates of the nearest-neighbor electron-transfer hopping rate constant for electrons are obtained. The ionization energetics suggest favored electron injection for the system with perfluoroarene groups at the end of the thiophene core, in agreement with experiments. The combined analyses of the electron-transfer properties and ionization processes suggest possible ambipolar behavior for these materials under favorable device conditions. [source] The Influence of Film Morphology in High-Mobility Small-Molecule:Polymer Blend Organic TransistorsADVANCED FUNCTIONAL MATERIALS, Issue 14 2010Jeremy Smith Abstract Organic field-effect transistors (OFETs) based upon blends of small molecular semiconductors and polymers show promise for high performance organic electronics applications. Here the charge transport characteristics of high mobility p-channel organic transistors based on 2,8-difluoro-5,11-bis(triethylsilylethynyl) anthradithiophene:poly(triarylamine) blend films are investigated. By simple alteration of the film processing conditions two distinct film microstructures can be obtained: one characterized by small spherulitic grains (SG) and one by large grains (LG). Charge transport measurements reveal thermally activated hole transport in both SG and LG film microstructures with two distinct temperature regimes. For temperatures >115,K, gate voltage dependent activation energies (EA) in the range of 25,60 meV are derived. At temperatures <115,K, the activation energies are smaller and typically in the range 5,30 meV. For both film microstructures hole transport appears to be dominated by trapping at the grain boundaries. Estimates of the trap densities suggests that LG films with fewer grain boundaries are characterized by a reduced number of traps that are less energetically disordered but deeper in energy than for small SG films. The effects of source and drain electrode treatment with self-assembled monolayers (SAMs) on current injection is also investigated. Fluorinated thiol SAMs were found to alter the work function of gold electrodes by up to ,1,eV leading to a lower contact resistance. However, charge transport analysis suggests that electrode work function is not the only parameter to consider for efficient charge injection. [source] Hole Injection in a Model Fluorene,Triarylamine CopolymerADVANCED FUNCTIONAL MATERIALS, Issue 2 2009Hon Hang Fong Abstract Recent developments in synthesis and purification have yielded conjugated polymers with hole mobilities exceeding 0.01,cm2 V,1 s,1. Essential to harvesting the potential of these materials in organic light emitting diodes (OLEDs) is the identification of suitable ohmic contacts. Using a model fluorene copolymer that shows high-mobility, non-dispersive hole transport, it is demonstrated that electrodes commonly used as anodes in OLEDs are very poor hole injectors. Injection from Au and indium tin oxide anodes is limited by energy barriers of 0.75 and 0.65,eV, respectively, and the injected current is found to be temperature independent,a prediction that was not reproduced by the leading injection model for disordered organic semiconductors. Injection from a poly(3,4-ethylenedioxythiophene) doped with poly(styrenesulfonate) (PEDOT:PSS) anode, on the other hand, is found to become less efficient with electric field, a behavior which is currently not understood. In thinner poly[(9,9,-dioctylfluorenyl-2,7-diyl)- co -(4,4,-(N -(4- sec -butyl))diphenylamine)] films, which are of relevance to OLEDs, ohmic losses on the PEDOT:PSS layer are found to limit the flow of current. These results illustrate the opportunity to further improve the performance of OLEDs as well as the challenge posed by high mobility conjugated polymers for the design of hole injection layers. [source] Harvesting Excitons Via Two Parallel Channels for Efficient White Organic LEDs with Nearly 100% Internal Quantum Efficiency: Fabrication and Emission-Mechanism AnalysisADVANCED FUNCTIONAL MATERIALS, Issue 1 2009Qi Wang Abstract By incorporating two phosphorescent dyes, namely, iridium(III)[bis(4,6-difluorophenyl)-pyridinato-N,C2,]picolinate (FIrpic) for blue emission and bis(2-(9,9-diethyl-9H -fluoren-2-yl)-1-phenyl-1H -benzoimidazol-N,C3)iridium(acetylacetonate) ((fbi)2Ir(acac)) for orange emission, into a single-energy well-like emissive layer, an extremely high-efficiency white organic light-emitting diode (WOLED) with excellent color stability is demonstrated. This device can achieve a peak forward-viewing power efficiency of 42.5,lm,W,1, corresponding to an external quantum efficiency (EQE) of 19.3% and a current efficiency of 52.8,cd,A,1. Systematic studies of the dopants, host and dopant-doped host films in terms of photophysical properties (including absorption, photoluminescence, and excitation spectra), transient photoluminescence, current density,voltage characteristics, and temperature-dependent electroluminescence spectra are subsequently performed, from which it is concluded that the emission natures of FIrpic and (fbi)2Ir(acac) are, respectively, host,guest energy transfer and a direct exciton formation process. These two parallel pathways serve to channel the overall excitons to both dopants, greatly reducing unfavorable energy losses. It is noteworthy that the introduction of the multifunctional orange dopant (fbi)2Ir(acac) (serving as either hole-trapping site or electron-transporting channel) is essential to this concept as it can make an improved charge balance and broaden the recombination zone. Based on this unique working model, detailed studies of the slight color-shift in this WOLED are performed. It is quantitatively proven that the competition between hole trapping on orange-dopant sites and undisturbed hole transport across the emissive layer is the actual reason. Furthermore, a calculation of the fraction of trapped holes on (fbi)2Ir(acac) sites with voltage shows that the hole-trapping effect of the orange dopant is decreased with increasing drive voltage, leading to a reduction of orange emission. [source] A New Donor,Acceptor,Donor Polyfluorene Copolymer with Balanced Electron and Hole Mobility,ADVANCED FUNCTIONAL MATERIALS, Issue 18 2007A. Gadisa Abstract A new alternating polyfluorene copolymer poly[2,7-(9,9-dioctylfluoren)- alt -5,5-(5,,8,-di-2-thienyl-(2,,3,-bis-(3,,-octyloxyphenyl)-quinoxaline))] (APFO-15), which has electron donor,acceptor,donor units in between the fluorene units, is synthesized and characterized. This polymer has a strong absorption and emission in the visible range of the solar spectrum. Its electroluminescence and photoluminescence emissions extend from about 560 to 900 nm. Moreover, solar cells with efficiencies in excess of 3.5,% have been realized from blends of APFO-15 and an electron acceptor molecule, a methanofullerene [6,6]-phenyl-C61 -butyric acid methyl ester (PCBM). It has also been observed that electron and hole transport is balanced both in the pure polymer phase and in polymer/PCBM bulk heterojunction films, which makes this material quite attractive for applications in opto-electronic devices. [source] The Effect of Polymer Optoelectronic Properties on the Performance of Multilayer Hybrid Polymer/TiO2 Solar CellsADVANCED FUNCTIONAL MATERIALS, Issue 4 2005P. Ravirajan Abstract We report a study of the effects of polymer optoelectronic properties on the performance of photovoltaic devices consisting of nanocrystalline TiO2 and a conjugated polymer. Three different poly(2-methoxy-5-(2,-ethylhexoxy)-1,4-phenylenevinylene) (MEH-PPV)-based polymers and a fluorene,bithiophene copolymer are compared. We use photoluminescence quenching, time-of-flight mobility measurements, and optical spectroscopy to characterize the exciton-transport, charge-transport, and light-harvesting properties, respectively, of the polymers, and correlate these material properties with photovoltaic-device performance. We find that photocurrent is primarily limited by the photogeneration rate and by the quality of the interfaces, rather than by hole transport in the polymer. We have also studied the photovoltaic performance of these TiO2/polymer devices as a function of the fabrication route and device design. Including a dip-coating step before spin-coating the polymer leads to excellent polymer penetration into highly structured TiO2 networks, as was confirmed through transient optical measurements of the photoinduced charge-transfer yield and recombination kinetics. Device performance is further improved for all material combinations studied, by introducing a layer of poly(ethylene dioxythiophene) (PEDOT) doped with poly(styrene sulfonic acid) (PSS) under the top contact. Optimized devices incorporating the additional dip-coated and PEDOT:PSS layers produced a short-circuit current density of about 1,mA,cm,2, a fill factor of 0.50, and an open-circuit voltage of 0.86,V under simulated AM,1.5 illumination (100,mW,cm,2, 1,sun). The corresponding power conversion efficiency under 1,sun was ,,0.4,%. [source] Direct Correlation of Organic Semiconductor Film Structure to Field-Effect Mobility,ADVANCED MATERIALS, Issue 19 2005M. DeLongchamp Near-edge X-ray fine structure spectroscopy is used to measure simultaneous chemical conversion, molecular ordering, and defect formation in soluble oligothiophene precursor films. Film structure is correlated to OFET performance. Molecular orientation is determined by evaluating antibonding orbital overlap with the polarized electric field vector of incident soft X-rays (see Figure and cover). Upon conversion, the molecules become vertically oriented, allowing , overlap in the plane of hole transport. [source] In Situ, Digital-Like, and Reagentless Discrimination of Label-Free SNPs of 90-mer Length with Easily Synthesized Electrochemical DNA ProbesCHEMBIOCHEM, Issue 18 2007Reona Ikeda Finding the mismatches. We have developed new electrochemical DNA probes for single nucleotide polymorphism (SNP) detection that are based on hole transport through duplexes. The probes could be easily synthesized, and discriminated single-base-mismatched target DNAs from the corresponding fully matched ones. This assay system allows for the in situ detection of label-free SNPs of 90-mer length, and it satisfies the requirements for a user-friendly SNP sensor that is highly compatible with PCR on-chip technologies. [source] | ||||||||||