Home About us Contact
|
Home About us Contact | ||
|
|
||
Highly Porous Structure (highly + porous_structure)
Selected AbstractsVoltammetric Detection of Lead(II) Using Amide-Cyclam- Functionalized Silica-Modified Carbon Paste ElectrodesELECTROANALYSIS, Issue 15 2009Stéphanie Goubert-Renaudin Abstract 2-(4,8,11-Triscarbamoylmethyl-1,4,8,11-tetraazacyclotetradec-1-yl)acetamide (TETAM) derivatives bearing 1, 2, or 4 silylated arms have been synthesized and grafted to the surface of silica gel and ordered mesoporous silica samples. The resulting organic-inorganic hybrids have been incorporated into carbon paste electrodes and applied to the preconcentration electroanalysis of Pb(II). The attractive recognition properties of these cyclam derivatives functionalized with amide pendent groups toward Pb(II) species and the highly porous structure of the adsorbents can be exploited for the selective and sensitive detection of the target analyte. Various parameters affecting the preconcentration and detection steps have been discussed with respect to the composition and pH of both accumulation and detection media, the nature of the adsorbent (number of silylated groups linking the macrocycle to silica, texture of materials), the accumulation time, and the presence of interfering cations. Under optimal conditions and for 2,min accumulation at open-circuit, the voltammetric response increased linearly with the Pb(II) concentration in a range extending from 2×10,7 to 10,5,M, while a longer accumulation time of 15,min afforded a linear calibration curve between 10,8 and 10,7,M with a detection limit of 2.7×10,9,M which is well below the European regulatory limit of lead in consumption water. [source] Separation of proteins in a multicompartment electrolyzer with chambers defined by a bed of gel beadsELECTROPHORESIS, Issue 4 2003Marina Cretich Abstract Multicompartment electrolyzers (MEs) with isoelectric membranes were introduced in 1989 for purifying proteins in an electric field. At the basis of ME technology there are membranes consisting of cross-linked copolymers of acrylamide and acrylamido monomers bearing protolytic groups. The technology employed for casting the membranes is an extension of the isoelectric focusing in immobilized pH gradient technique for which specific acrylamido monomers, known with the trade name of Immobiline, have been developed. However, the use of continuous membranes presents several disadvantages. Due to the mechanical characteristics of polyacrylamide, the gel must physically adhere onto a rigid support, which prevents it from collapsing. The support must have a highly porous structure in order to be permeable to proteins. The mechanical fragility of the membranes is one of the main problems that hinders the industrial scale application of ME separators. In order to overcome this problem, we propose to substitute the continuous membranes with a bed of gel beads of identical comonomer composition, obtained by an inverse emulsion polymerization process. [source] Formation of Network and Cellular Structures by Viscoelastic Phase SeparationADVANCED MATERIALS, Issue 18 2009Hajime Tanaka Abstract Network (sponge) and cellular structures are often seen in various types of materials. Materials with such structures are generally characterized by light weight and high mechanical strength. The usefulness of such materials is highlighted, for example, by the remarkable material properties of bone tissue, which often has a highly porous structure. In artificial materials, plastic and metallic foams and breads have such structures. Here, we describe a physical principle for producing network and cellular structures using phase separation, and its potential applications to the morphological control of materials spanning from soft to hard matter. [source] Mesenchymal stem cell interaction with a non-woven hyaluronan-based scaffold suitable for tissue repairJOURNAL OF ANATOMY, Issue 5 2008G. Pasquinelli Summary The fabrication of biodegradable 3-D scaffolds enriched with multipotent stem cells seems to be a promising strategy for the repair of irreversibly injured tissues. The fine mechanisms of the interaction of rat mesenchymal stem cells (rMSCs) with a hyaluronan-based scaffold, i.e. HYAFF®11, were investigated to evaluate the potential clinical application of this kind of engineered construct. rMSCs were seeded (2 × 106 cells cm,2) on the scaffold, cultured up to 21 days and analysed using appropriate techniques. Light (LM), scanning (SEM) and transmission (TEM) electron microscopy of untreated scaffold samples showed that scaffolds have a highly porous structure and are composed of 15-µm-thick microfibres having a rough surface. As detected by trypan blue stain, cell adhesion was high at day 1. rMSCs were viable up to 14 days as shown by CFDA assay and proliferated steadily on the scaffold as revealed by MTT assay. LM showed rMSCs in the innermost portions of the scaffold at day 3. SEM revealed a subconfluent cell monolayer covering 40 ± 10% of the scaffold surface at day 21. TEM of early culture showed rMSCs wrapping individual fibres with regularly spaced focal contacts, whereas confocal microscopy showed polarized expression of CD44 hyaluronan receptor; TEM of 14-day cultures evidenced fibronexus formation. Immunohistochemistry of 21-day cultures showed that fibronectin was the main matrix protein secreted in the extracellular space; decorin and versican were seen in the cell cytoplasm only and type IV collagen was minimally expressed. The expression of CD90, a marker of mesenchymal stemness, was found unaffected at the end of cell culture. Our results show that HYAFF®11 scaffolds support the adhesion, migration and proliferation of rMSCs, as well as the synthesis and delivery of extracellular matrix components under static culture conditions without any chemical induction. The high retention rate and viability of the seeded cells as well as their fine modality of interaction with the substrate suggest that such scaffolds could be potentially useful when wide tissue defects are to be repaired as in the case of cartilage repair, wound healing and large vessel replacement. [source] Fabrication of a Porous Bioactive Glass,Ceramic Using Room-Temperature Freeze CastingJOURNAL OF THE AMERICAN CERAMIC SOCIETY, Issue 8 2006Ju-Ha Song The room-temperature freeze-casting method was used to fabricate porous bioactive glass,ceramics. In this method, a glass/camphene slurry prepared at 60°C was cast into a mold at 20°C, resulting in the production of a rigid green body that was comprised of three-dimensional dendritic camphene networks surrounded by highly concentrated glass powder walls. After the sublimation of camphene, the samples were sintered for 3 h at elevated temperatures ranging from 700° to 1100°C. As the sintering temperature was increased to 1000°C, the densification of the glass,ceramic wall was remarkably enhanced, while its highly porous structure was preserved. The sample sintered at 1000°C showed a high porosity of 53% and pore channels with a size of several tens of micrometers, as well as dense glass,ceramic walls. In addition, the fabricated samples effectively induced the deposition of apatite on their surfaces when immersed in simulated body fluid, implying that they are very bioactive. [source] | |||||||||||||