Home About us Contact
|
Home About us Contact | ||
|
|
||
High Contrast Ratio (high + contrast_ratio)
Selected AbstractsHexyl-Derivatized Poly(3,4-ethylenedioxyselenophene): Novel Highly Stable Organic Electrochromic Material with High Contrast Ratio, High Coloration Efficiency, and Low-Switching VoltageADVANCED MATERIALS, Issue 17 2009Mao Li A novel family of electrochromic materials has been discovered. The electropolymerized poly(hexyl-3,4-ethylenedioxyselenophene) film switches color between a highly absorbing pure blue and a nearly colorless bleached state, achieves both a high contrast ratio of 88,89% and a high CE of up to 773,cm2 C,1 while showing a fast switching time and remarkable stability with the contrast ratio remaining 48% after 10000 cycles. [source] Enhanced Electrical Switching and Electrochromic Properties of Poly(p-phenylenebenzobisthiazole) Thin Films Embedded with Nano-WO3ADVANCED FUNCTIONAL MATERIALS, Issue 18 2010Jiahua Zhu Abstract The electrical switching and electrochromic phenomena of a novel nanocomposite comprising poly(p-phenylenebenzobisthiazole) (PBZT) and tungsten oxide (WO3) nanoparticles are investigated as a function of the nanoparticle loading. Both dissolving PBZT and doping PBZT backbone structure with acid are achieved by one simple step. Chlorosulfonic acid (CSA) is used as a solvent and spontaneously transformed to sulfuric acid upon exposure to moisture. The formed sulfuric acid serves as doping agent to improve the electrical conductivity of PBZT. The most significant enhancement of electrical switching is observed in the nanocomposites with low weight fraction (5%). The electrical conductivity of 5% WO3/PBZT nanocomposite thin film is increased by about 200 times and 2 times, respectively, as compared to those of the as-received PBZT and PBZT/CSA thin films. As the nanoparticle loading increases to 20% and 30%, the nanocomposites follow an ohmic conduction mechanism. Stable electrical conductivity switching is observed before and after applying a bias on the pristine PBZT and WO3/PBZT nanocomposite thin films. Electrochromic phenomena of both PBZT and WO3/PBZT nanocomposite thin films with high contrast ratio are observed after applying a bias (3 V). The mechanisms of the nanoparticles in enhancing the electrical switching and electrochromic properties are proposed. [source] Hexyl-Derivatized Poly(3,4-ethylenedioxyselenophene): Novel Highly Stable Organic Electrochromic Material with High Contrast Ratio, High Coloration Efficiency, and Low-Switching VoltageADVANCED MATERIALS, Issue 17 2009Mao Li A novel family of electrochromic materials has been discovered. The electropolymerized poly(hexyl-3,4-ethylenedioxyselenophene) film switches color between a highly absorbing pure blue and a nearly colorless bleached state, achieves both a high contrast ratio of 88,89% and a high CE of up to 773,cm2 C,1 while showing a fast switching time and remarkable stability with the contrast ratio remaining 48% after 10000 cycles. [source] Preparation and characterization of PDLC films formed using a two-step procedureADVANCES IN POLYMER TECHNOLOGY, Issue 1 2007Yu-Che Hsiao Abstract A novel polymer-dispersed liquid crystal composite film was prepared using liquid crystal and dual resins, namely, UV-curable urethane diacrylate and thermo-curable epoxy, with a fixed LC content of 50 wt%. A combination treatment of UV irradiation and heat was performed in sequential steps. At first, the urethane diacrylate resin was cross-linked through UV irradiation and a pre-UV-cured film was formed. Then, the pre-UV-cured film was heat treated for curing the thermo-curable epoxy resin. As the thermal polymerization continued, LC droplets were formed and became embedded within the polymer matrix. PDLC films obtained from the polymer matrix with refractive indices in a range from 1.511 to 1.523 (1.517 ± 0.006) have optimal electro-optical properties. Films with a refractive index higher than 1.523 have high contrast ratio (CR), threshold voltage (Vth), and V90, whereas those with a low refractive index of 1.508 have low CR, Vth, and V90. In this study, we found that PDLC composite films with optimal compositions prepared by dual resins (UV/thermal) have good electro-optical properties. © 2007 Wiley Periodicals, Inc. Adv Polym Techn 26:14,20, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/adv.20087 [source] An investigation into the morphology and electro-optical properties of 2-hydroxy ethyl methacrylate polymer dispersed liquid crystalsJOURNAL OF APPLIED POLYMER SCIENCE, Issue 3 2010Huey-Ling Chang Abstract Polymer dispersed liquid crystal (PDLC) films are fabricated using E7 liquid crystals, tetraethylene glycol diacrylate (TeGDA) crosslinking agent, and 0,66.49 mol % 2-hydroxy ethyl methacrylate (HEMA). The effects of different levels of HEMA addition on the microstructure and electro-optical properties of the PDLC samples are examined using scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and UV-Vis spectroscopy, respectively. The results show that the refractive index of the PDLC films is insensitive to the level of HEMA addition. However, an increasing HEMA content improves the degree of phase separation during the polymerization process and increases the size and uniformity of the liquid crystal domain. As a result, the electro-optical properties of the PDLC films are significantly improved as the level of HEMA addition is increased. Overall, the results show that a PDLC comprising 40 wt % E7 liquid crystals, 33.51 mol % TeGDA and 66.49 mol % HEMA has a high contrast ratio (13 : 1) and a low driving voltage (10 V) and is therefore an ideal candidate for a wide variety of intelligent photoelectric applications. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010 [source] Highly stable electrochromic polyamides based on N,N -bis(4-aminophenyl)- N,,N,-bis(4- tert -butylphenyl)-1,4-phenylenediamineJOURNAL OF POLYMER SCIENCE (IN TWO SECTIONS), Issue 9 2009Sheng-Huei Hsiao Abstract A new triphenylamine-containing aromatic diamine monomer, N,N -bis(4-aminophenyl)- N,,N,-bis(4- tert -butylphenyl)-1,4-phenylenediamine, was synthesized by an established synthetic procedure from readily available reagents. A novel family of electroactive polyamides with di- tert -butyl-substituted N,N,N,,N,-tetraphenyl-1,4-phenylenediamine units were prepared via the phosphorylation polyamidation reactions of the newly synthesized diamine monomer with various aromatic or aliphatic dicarboxylic acids. All the polymers were amorphous with good solubility in many organic solvents, such as N -methyl-2-pyrrolidinone (NMP) and N,N -dimethylacetamide, and could be solution-cast into tough and flexible polymer films. The polyamides derived from aromatic dicarboxylic acids had useful levels of thermal stability, with glass-transition temperatures of 269,296 °C, 10% weight-loss temperatures in excess of 544 °C, and char yields at 800 °C in nitrogen higher than 62%. The dilute solutions of these polyamides in NMP exhibited strong absorption bands centered at 316,342 nm and photoluminescence maxima around 362,465 nm in the violet-blue region. The polyamides derived from aliphatic dicarboxylic acids were optically transparent in the visible region and fluoresced with a higher quantum yield compared with those derived from aromatic dicarboxylic acids. The hole-transporting and electrochromic properties were examined by electrochemical and spectro-electrochemical methods. Cyclic voltammograms of the polyamide films cast onto an indium-tin oxide-coated glass substrate exhibited two reversible oxidation redox couples at 0.57,0.60 V and 0.95,0.98 V versus Ag/AgCl in acetonitrile solution. The polyamide films revealed excellent elcterochemical and electrochromic stability, with a color change from a colorless or pale yellowish neutral form to green and blue oxidized forms at applied potentials ranging from 0.0 to 1.2 V. These anodically coloring polymeric materials showed interesting electrochromic properties, such as high coloration efficiency (CE = 216 cm2/C for the green coloring) and high contrast ratio of optical transmittance change (,T%) up to 64% at 424 nm and 59% at 983 nm for the green coloration, and 90% at 778 nm for the blue coloration. The electroactivity of the polymer remains intact even after cycling 500 times between its neutral and fully oxidized states. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2330,2343, 2009 [source] | ||||||||||||||||||||||