Height Distribution (height + distribution)

Distribution by Scientific Domains


Selected Abstracts


Freezing height distribution in the tropics

INTERNATIONAL JOURNAL OF SATELLITE COMMUNICATIONS AND NETWORKING, Issue 6 2003
Merhala Thurai
Abstract The calculation of fade margins required to meet the user-specified availability criteria needs to take into consideration a number of meteorological factors specific to the earth-station location. One such factor is the annual average of the freezing level height. Information on this height is available in ITU-R Recommendation P. 839-3, which provides contours that are generated on a 1.5° by 1.5° latitude by longitude resolution grid. This paper compares these heights with the bright-band heights (BBH) obtained from the precipitation radar on-board the TRMM (Tropical Rainfall Measuring Mission) satellite. Four years of TRMM radar data have been analysed, and their averages are compared within the latitude range covered by the satellite orbit (35°N to 35°S). Comparisons show that the radar bright-band heights typically occur 300 m below the 0°C isotherm heights. However, results also indicate that this difference may be latitude dependent. Also examined are the year-to-year variability and the seasonal variation. In the former case, only 1998 showed BBH values which are somewhat higher in tropical regions, this year having had one of the strongest El Niño events recorded. In the latter case, results show significant seasonal variation, becoming more pronounced at higher latitudes. Copyright © 2003 John Wiley & Sons, Ltd. [source]


An integrated analysis of lidar observations in association with optical properties of aerosols from a high altitude location in central Himalayas

ATMOSPHERIC SCIENCE LETTERS, Issue 1 2009
P. Hegde
Abstract In order to study the aerosol backscatter profiles, a portable micro pulse lidar (MPL) system was installed in the year 2006 at Manora Peak, (29°22,N, 79°27,E, ,1960 m amsl) Nainital, a high altitude location in the central Himalayas. In the present study the results of observed lidar profiles, columnar aerosol optical depths (AOD) and prevailing meteorology during May 2006 to June 2007 are presented. Although the lidar was operated from a sparsely inhabited free tropospheric site, nevertheless the height distribution of aerosol layers are found to be extended up to the summit of ,2 km above the ground level (AGL). The backscatter ratio (BSR) varies from ,10 to ,20 having lowest values during post-monsoon and highest during pre-monsoon period. The observed boundary layer height during the post monsoon was shallower to the pre-monsoon period. Occasionally the lidar profiles reveal the presence of cirrus clouds at an altitude of 8,10 km AGL. The extended lidar observations over Manora Peak not only provided the profiles of aerosol extinction coefficient but also significantly substantiate the elevated aerosol layers and clouds, which are important in the study of climate modelling. Copyright © 2009 Royal Meteorological Society [source]


Structure of Anogeissus leiocarpa Guill., Perr. natural stands in relation to anthropogenic pressure within Wari-Maro Forest Reserve in Benin

AFRICAN JOURNAL OF ECOLOGY, Issue 3 2010
Achille Ephrem Assogbadjo
Abstract The present study focused on the analysis of the structure of the Anogeissus leiocarpa dominated natural stands in the Wari-Maro forest reserve which are under high and minimal anthropogenic pressures. These stands were considered for forest inventories after carrying out a random sampling scheme of 40 sample units of 30 m × 50 m. In each level pressure stand, the dbh and tree-height of identified tree-species were measured in each plot. Data analyses were based on the computation of structural parameters, establishment of diameter and height distributions and the floristic composition of the two types of stands. Results obtained showed higher values for the overall basal area (9.78 m2 ha,1), mean height (22.37 m) and mean diameter (36.92 cm) for A. leiocarpa in low-pressure stands. In high-pressure stands, some species like Afzelia africana had lower Importance Value Index and the frequency of A. leiocarpa trees in the successive diameter classes dropped rapidly and the value of the logarithmic slope of the height,diameter relationship was lower (9.77) indicating a lanky shape. Results obtained suggest that effective conservation is needed for A. leiocarpa stands under high pressure by limiting human interference and developing appropriate strategy for restoration purposes. Résumé Cette étude s'est focalisée sur l'analyse de la structure de peuplements naturels à dominance de Anogeissus leiocarpa, dans la forêt classée de Wari-Maro, qui subissent à certains endroits, des pressions anthropiques fortes et à d'autres endroits des pressions anthropiques minimes. Ces peuplements ont été inventoriés en considérant un échantillonnage aléatoire de 40 placeaux de 30 m × 50 m. Pour chaque niveau de pression, on a mesuré dans chaque placeau le diamètre à 1,3 m et la hauteur totale des arbres d'espèces identifiées. L'analyse des données s'est basée sur le calcul des paramètres structuraux, sur l'établissement de la distribution en diamètre et en hauteur et sur la composition floristique des peuplements des deux types de formation. Les résultats obtenus indiquent les plus grandes valeurs pour la surface terrière globale (9,78 m² ha,1), la hauteur moyenne (22,37 m) et le diamètre moyen (36,92 cm) chez A. leiocarpa dans les peuplements soumis à une faible pression. Dans les peuplements subissant une forte pression, certaines espèces comme Afzelia africana avaient les plus faibles Indices d'importance, la fréquence de A. leiocarpa dans les classes de hauteurs successives diminuait rapidement et la valeur de la pente logarithmique de la relation hauteur/diamètre était plus faible (9,77), ce qui indique une forme élancée. Les résultats obtenus suggèrent que les peuplements de A. leiocarpa sous forte pressions anthropiques requièrent une conservation efficace, en limitant les pertubations humaines et en développant une stratégie appropriée en vue de leur restauration. [source]


Inheritance of reduced plant height in the sunflower line Dw 89

PLANT BREEDING, Issue 5 2003
L. Velasco
Abstract The objective of the present research was to study the inheritance of reduced plant height in the sunflower line Dw 89. Plants of the cytoplasmic male sterile version of this line, cmsDw 89 (mean plant height of 47.4 cm) were crossed with plants of the restorer line RHA 271 (mean of 120.9 cm). F1 plants averaged 120.4 cm, which indicated dominance of standard over reduced plant height. F2 plants followed a segregation pattern of 1 : 15 (reduced : normal height), suggesting that reduced plant height in Dw 89 is controlled by alleles at two loci, designated Dw1 and Dw2. Class assignment in the F2 was confirmed through the evaluation of the F3 generation. Backcrosses to Dw 89 segregated with 1 : 3 (reduced : normal height) ratios, which confirmed the digenic inheritance of the trait. The evaluation of plant height distributions in F3 families suggested possible genetic interaction between the Dw1 and Dw2 loci. [source]


Fluctuation model for a rough metal/semiconductor interface

PHYSICA STATUS SOLIDI (C) - CURRENT TOPICS IN SOLID STATE PHYSICS, Issue 3 2003
N. L. Dmitruk
Abstract The fluctuation model with Gaussian-type of barrier heights distribution that was recently applied successfully to explain the dark current,voltage characteristics of Au/GaAs barrier structure with microrelief interface, in this paper is extended to photoelectric characteristics. In addition to the change of the Richardson constant and the apparent temperature coefficient of barrier height we predict the decrease of the open-circuit voltage of photodetectors or solar cells. The theoretical predictions have been verified experimentally on the Au/GaAs Schottky barriers with dendrite-like or quasigrating interface prepared by wet anisotropic etching. [source]