			Home About us Contact

Geometry Parameters (geometry + parameter)

Distribution by Scientific Domains

Engineering	40%
Earth and Environmental Science	40%

Selected Abstracts

Factors affecting fluid flow in strike,slip fault systems: coupled deformation and fluid flow modelling with application to the western Mount Isa Inlier, Australia

GEOFLUIDS (ELECTRONIC), Issue 1 2009
A. FORD
Abstract Deformation and focused fluid flow within a mineralized system are critical in the genesis of hydrothermal ore deposits. Dilation and integrated fluid flux due to coupled deformation and fluid flow in simple strike,slip fault geometries were examined using finite difference analysis in three dimensions. A series of generic fault bend and fault jog geometries consistent with those seen in the western Mount Isa Inlier were modelled in order to understand how fault geometry parameters influence the dilation and integrated fluid flux. Fault dip, fault width, bend/jog angle, and length were varied, and a cross-cutting fault and contrasting rock types were included. The results demonstrate that low fault dips, the presence of contrasts in rock type, and wide faults produce highest dilation and integrated fluid flux values. Increasing fault bend lengths and angles increases dilation and integrated fluid flux, but increasing fault jog length or angle has the opposite effect. There is minimal difference between the outputs from the releasing and restraining fault bend and jog geometries. Model characteristics producing greater fluid flows and/or gradients can be used in a predictive capacity in order to focus exploration on regions with more favorable fault geometries, provided that the mineralized rocks had Mohr,Coulomb rheologies similar to the ones used in the models. [source]

From Micro to Meso: an exercise in determining hydraulic conductivity of fractured sandstone cores from detailed characterization of the fractures

GEOPHYSICAL JOURNAL INTERNATIONAL, Issue 3 2006
Salima Baraka-Lokmane
SUMMARY Hydraulic conductivities of fractured sandstone bore cores of 0.1 m in diameter are calculated using detailed characterization of the fracture geometry parameters determined using a resin casting technique. The accuracy of the measurements was about 0.25,1.25 ,m with the image size used. The values of the effective fracture apertures vary between 10 ,m and 50 ,m. For modelling purposes the samples are sectioned serially, perpendicular to the flow direction along the cylinder axis. The hydraulic conductivity of individual slices is estimated by summing the contribution of the matrix (assumed uniform) and each fracture (depending on its length and aperture). Finally, the hydraulic conductivity of the bulk sample is estimated by a harmonic average in series along the flow path. Results of this geometrical upscaling compare favourably with actual conductivity measured in hydraulic and pneumatic experiments carried out prior to sectioning. This study shows that the determination of larger-scale conductivity can be achieved, based on the evaluation of fracture geometry parameters (e.g. fracture aperture, fracture width and fracture length), measured using an optical method, at least at the laboratory scale. [source]

Predicting river width, depth and velocity at ungauged sites in England and Wales using multilevel models

HYDROLOGICAL PROCESSES, Issue 20 2008
D. J. Booker
Abstract Using a dataset of gauged river discharges taken from sites in England and Wales, linear multilevel models (also known as mixed effects models) were applied to quantify the variability in discharge and the discharge-hydraulic geometry relationships across three nested spatial scales. A jackknifing procedure was used to test the ability of the multilevel models to predict hydraulic geometry, and therefore width, mean depth and mean velocity, at ungauged stations. These models provide a framework for making predictions of hydraulic geometry parameters, with associated levels of uncertainty, using different levels of data availability. Results indicate that as one travels downstream along a river there is greater variability in hydraulic geometry than is the case between rivers of similar sizes. This indicates that hydraulic geometry (and therefore hydrology) is driven by catchment area, to a greater extent than by natural geomorphological variations in the streamwise direction at the mesoscale, but these geomorphological variations can still have a major impact on channel structure. Copyright © 2008 John Wiley & Sons, Ltd. [source]

Energy decomposition scheme for combined ab initio quantum mechanical / molecular mechanical methods

INTERNATIONAL JOURNAL OF QUANTUM CHEMISTRY, Issue 3 2005
Imre Berente
Abstract A new energy decomposition scheme is presented which paves the way toward the accurate and simple treatment of boundary atoms in combined ab initio quantum mechanical / molecular mechanical methods. We extend the wave function beyond the quantum region to a few atoms of the molecular mechanical region, which are linked directly to boundary atoms. Furthermore, we apply an approximate decomposition scheme, which allows calculating the total energy in terms of one-center atomic contributions. Comparisons with reference ab initio calculations are made, and good agreement is obtained for geometry parameters referring to CC, CC, and CX (XO, S, N) bonds at the boundary, as well as for the rotational energy curve of n -butane. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005 [source]

Synthesis of interdigital capacitors based on particle swarm optimization and artificial neural networks

INTERNATIONAL JOURNAL OF RF AND MICROWAVE COMPUTER-AIDED ENGINEERING, Issue 4 2006
Jehad Ababneh
Abstract This article reports on the use of the particle swarm optimization (PSO) algorithm in the synthesis of the planar interdigital capacitor (IDC). The PSO algorithm is used to optimize the geometry parameters of the IDC in order to obtain a certain capacitance value. The capacitance value of the IDC is evaluated using an artificial neural network (ANN) model with the geometry parameters of the IDC as its inputs. Several design examples are presented that illustrate the use of the PSO algorithm, and the design goal in each example is easily achieved. Full-wave electromagnetic simulations are also performed for some of the studied IDC structures implemented using coplanar waveguide (CPW) technology. The simulation results are in good agreement with those obtained using the ANN/PSO algorithm. © 2006 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2006. [source]