			Home About us Contact

Film Applications (film + application)

Distribution by Scientific Domains

Chemistry	50%
Polymers and Materials Science	33%

Selected Abstracts

The Characteristics of Polyethylene Film for Stretch and Cling Film Applications

ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING, Issue 1-2 2004
C.M. Small
Part I. A range of polyethylene films were prepared from metallocene linear low density polyethylene (m-LLDPE), linear low density polyethylene (LLDPE) and ultra low density polyethylene (ULDPE) resins, containing 0 and 8% polyisobutylene (PIB). FTIR, DSC and mechanical analysis techniques were used to investigate the effect of co-monomer type, density and melt flow index (MFI) on the mechanical performance, orientation and crystallinity of these films. The study established that co-monomer type and MFI were the greatest factors influencing mechanical performance and crystallinity. Crystallinity was found to be the most influential factor governing PIB migration in these films and this in turn was related to polymer type, density and MFI, High MFI, octene co-monomer films exhibited the highest orientation, tear resistance and tack strength and would therefore be suitable for stretch film applications. Ultra low-density polymers gave relatively low tack strength and poor overall mechanical performance. Part II. A range of ethyl vinyl acetate (EVA)/m-LLDPE/EVA co-extruded films was manufactured, with vinyl acetate (VA) co-monomer content of 6, 12 and 18% and PIB content from 0,20%. The films were aged at 45d,C for up to 28 days, to enable tack (cling) development. The results show that film tack strength improved significantly with ageing. Increased VA concentration in the surface layer also showed significant improvement in film tack strength. The film tensile strength, elongation and tear properties in both machine direction (MD) and transverse direction (TD) were not significantly affected by increase in PIB concentration. However, increased VA content showed slight improvement in MD mechanical performance of the films, TD properties were relatively unaffected. Films with 12 to 18% VA in the surface layers produced high surface tack film and the mechanical performance of these films were comparable to mono-layer polyethylenes. These films are suitable for stretch wrap applications and have reduced the overall concentrations of tack additives, though high VA films were more difficult to process. [source]

Oxygen scavengers and sensitizers for reduced oxygen inhibition in radical photopolymerization

JOURNAL OF POLYMER SCIENCE (IN TWO SECTIONS), Issue 20 2008
Michael Höfer
Abstract Oxygen inhibition in the free-radical photopolymerization of (meth)acrylates is one of the most challenging problems in thin film application. Apart from the utilization of an inert gas atmosphere, additives reducing oxygen inhibition due to production of new propagating centers are used. In the present study, a more straightforward approach to reduce oxygen inhibition by photosensitized generation of singlet oxygen and subsequent scavenging of these species by selective singlet oxygen trappers was investigated. The potential of 1,2-dions conventionally used as type-II photoinitiators for visible light polymerization to function as singlet oxygen generators was verified in sensitized steady state photooxidation experiments in solution. A set of furan and anthracene derivatives were tested as oxygen scavengers and their corresponding relative reaction rates were determined. The ability of these sensitizer/scavenger systems to reduce oxygen inhibition in practical applications was studied in photo-DSC-experiments. In thin film polymerization (investigated by ATR-FTIR), the formation of insufficiently cured surfaces could be prevented by the usage of singlet oxygen trappers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6916,6927, 2008 [source]

Electrically Conductive Thin Films Prepared from Layer-by-Layer Assembly of Graphite Platelets

ADVANCED FUNCTIONAL MATERIALS, Issue 7 2009
Mubarak Alazemi
Abstract Layer-by-layer (LBL) assembly of carbon nanoparticles for low electrical contact resistance thin film applications is demonstrated. The nanoparticles consist of irregularly shaped graphite platelets, with acrylamide/,, -methacryl-oxyethyl-trimethyl-ammonium copolymer as the cationic binder. Nanoparticle zeta (,,) potential and thereby electrostatic interactions are varied by altering the pH of graphite suspension as well as that of the binder suspension. Film thickness as a function of zeta potential, immersion time, and the number of layers deposited is obtained using Monte Carlo simulation of the energy dispersive spectroscopy measurements. Multilayer film surface morphology is visualized via field-emission scanning electron microscopy and atomic-force microscopy. Thin film electrical properties are characterized using electrical contact resistance measurements. Graphite nanoparticles are found to self-assemble onto gold substrates through two distinct yet overlapping mechanisms. The first mechanism is characterized by logarithmic carbon uptake with respect to the number of deposition cycles and slow clustering of nanoparticles on the gold surface. The second mechanism results from more rapid LBL nanoparticle assembly and is characterized by linear weight uptake with respect to the number of deposition cycles and a constant bilayer thickness of 15 to 21,nm. Thin-film electrical contact resistance is found to be proportional to the thickness after equilibration of the bilayer structure. Measured values range from 1.6,m,,cm,2 at 173,nm to 3.5,m,,cm,2 at 276,nm. Coating volume resistivity is reduced when electrostatic interactions are enhanced during LBL assembly. [source]

Antimicrobial activity of glucose oxidase-immobilized plasma-activated polypropylene films

PACKAGING TECHNOLOGY AND SCIENCE, Issue 5 2005
Jari Vartiainen
Abstract Antimicrobial enzyme, glucose oxidase (GOX), was covalently immobilized onto amino- and carboxyl-plasma-activated biorientated polypropylene films (BOPP) via glutaraldehyde and carbodiimide chemistries. N2 -plasma + NH3 and N2 -plasma + CO2 treatments were utilized to create amino (1.1,nmol/cm2) and carboxyl (0.9,nmol/cm2) groups densities onto the surface of BOPP films. GOX-immobilized onto amino-activated BOPP films using 2.5% glutaraldehyde produced higher enzymatic activities than GOX-immobilized by 0.4% carbodiimide. Further immobilizations were carried out with glutaraldehyde as the coupling agent at temperatures of 4,75°C at pH 5.6 and 7.2. 10,s treatment was sufficient to immobilize GOX at high temperatures in both pH conditions, producing enzymatically active films which remained active over 30 days of storage. GOX covalently immobilized onto BOPP films completely inhibited the growth of Escherichia coli and substantially inhibited the growth of Bacillus subtilis; thus, they may have great potential to be exploited in various antimicrobial packaging film applications. Copyright © 2005 John Wiley & Sons, Ltd. [source]

Generation of paramagnetic hybrid inorganic/organic thin films

APPLIED ORGANOMETALLIC CHEMISTRY, Issue 7 2010
Abhinav Bhushan
Abstract There is a growing interest in developing advanced materials for thin film applications in biology, electronics, photonics and engineering. We report the development of hybrid inorganic/organic thin films containing nickel, iron and cobalt paramagnetic materials. By etching the resist in oxygen plasma after processing, most of the organic component of the resist was removed. The elemental chemical composition of the films was confirmed by energy dispersive X-ray spectroscopy. This process can potentially lead to patterning paramagnetic thin films containing paramagnetic materials by following standard photolithography protocols, obviating the need for a wet or vacuum metal deposition. Copyright © 2010 John Wiley & Sons, Ltd. [source]