Home About us Contact
|
Home About us Contact | ||
|
|
||
Endodontic Instruments (endodontic + instruments)
Selected AbstractsMechanical preparation of root canals: shaping goals, techniques and meansENDODONTIC TOPICS, Issue 1 2005Michael Hülsmann Preparation of root canal systems includes both enlargement and shaping of the complex endodontic space together with its disinfection. A variety of instruments and techniques have been developed and described for this critical stage of root canal treatment. Although many reports on root canal preparation can be found in the literature, definitive scientific evidence on the quality and clinical appropriateness of different instruments and techniques remains elusive. To a large extent this is because of methodological problems, making comparisons among different investigations difficult if not impossible. The first section of this paper discusses the main problems with the methodology of research relating to root canal preparation while the remaining section critically reviews current endodontic instruments and shaping techniques. [source] Attitudes and use of rubber dam by Irish general dental practitionersINTERNATIONAL ENDODONTIC JOURNAL, Issue 6 2007C. D. Lynch Abstract Aim, To investigate the attitudes towards and use of rubber dam by Irish general dental practitioners. Methodology, A pre-piloted questionnaire was distributed amongst a group of 600 dentists randomly selected from the Irish Register of Dentists. Replies from dentists working in specialist practice or the hospital dental service were excluded. Dentists were surveyed in relation to their use of rubber dam during a variety of operative and root canal treatments, as well as their attitudes to the use of rubber dam in dental practice. Results, A total of 300 replies were considered from a total of 324 that were received. Seventy-seven per cent of respondents (n = 231) worked in general dental practice and 23% (n = 69) worked in the Irish Health Board/Community Dental Service. Rubber dam was ,never' used by 77% of respondents (n = 228) when placing amalgam restorations in posterior teeth, 52% (n = 147) when placing composite restorations in posterior teeth, and 59% (n = 177) when placing composite restorations in anterior teeth. Rubber dam was ,never' used by 39% of respondents (n = 114) when performing root canal treatment on anterior teeth; 32% (n = 84) when performing root canal treatment on premolar teeth; and 26% (n = 51) when performing root canal treatment on molar teeth. Fifty-seven per cent (n = 171) considered rubber dam ,cumbersome and difficult to apply', and 41% (n = 123) considered throat pack ,as good a prevention against inhalation of endodontic instruments as rubber dam'. Conclusions, Whilst rubber dam is used more frequently for root canal treatment than operative treatment, its use is limited. This presents quality issues, as well as medico-legal and safety concerns for both the profession and patients. [source] Phase transformation behaviour and bending properties of hybrid nickel,titanium rotary endodontic instrumentsINTERNATIONAL ENDODONTIC JOURNAL, Issue 4 2007Y. Hayashi Abstract Aim, To investigate the bending properties of hybrid rotary nickel,titanium endodontic instruments in relation to their transformation behaviour. Methodology, Four types of nickel,titanium rotary endodontic instruments with different cross-sectional shapes (triangular-based and rectangular-based) and different heat treatment conditions (super-elastic type and hybrid type with shape memory effect) were selected to investigate bending properties and phase transformation behaviour. Bending load of the instruments was measured in a cantilever-bending test at 37 °C with the maximum deflection of 3.0 mm. A commercial rotary instrument, ProFile (PF; Dentsply Maillefer, Ballaigues, Switzerland) was used as a reference for the bending test. Phase transformation temperatures were calculated from the diagrams obtained from differential scanning calorimetry. Data were analysed by anova and Scheffe's test. Results, The bending load values of the hybrid type that had undergone additional heat treatment at the tip were significantly lower (P < 0.05) than those of the super-elastic type with no additional heat treatment. The bending load values of rectangular-based cross-sectional shaped instruments were significantly lower (P < 0.05) than those of triangular-based cross-sectional shaped instruments. Phase transformation temperatures (Ms and Af points) of the hybrid type were significantly higher (P < 0.05) than the super-elastic type. The Mf and As points of the tip part were significantly higher (P < 0.05) than those of the whole part of the hybrid instrument. Conclusions, Additional heat treatment of hybrid nickel,titanium instruments may be effective in increasing the flexibility of nickel,titanium rotary instruments. [source] Physical and mechanical characterization and the influence of cyclic loading on the behaviour of nickel-titanium wires employed in the manufacture of rotary endodontic instrumentsINTERNATIONAL ENDODONTIC JOURNAL, Issue 11 2005M. G. A. Bahia Abstract Aim, To analyse the influence of cyclic loading on the mechanical behaviour of nickel-titanium (NiTi) wires employed in the manufacture of ProFile rotary endodontic instruments. Methodology, Nickel-titanium wires, 1.2 mm in diameter, taken from the production line of ProFile rotary endodontic instruments before the final machining step, were tensile-tested to rupture in the as-received condition and after 100 load,unload cycles in the superelastic plateau (4% elongation). The wires were characterized by X-ray energy-dispersive spectroscopy, X-ray diffraction and by differential scanning calorimetry and compared with new size 30, .06 taper ProFile instruments. The fracture surfaces of the wires were observed by scanning electron microscopy. Results, The mechanical properties of the as-received wires, their chemical composition, the phases present and their transformation temperatures were consistent with their final application. Only small changes, which decreased after the first few cycles, took place in the mechanical properties of the cycled wires. The stress at maximum load and the plastic strain at breakage remained the same, while the critical stress for inducing the superelastic behaviour, which is related to the restoring force of the endodontic instruments, decreased by approximately 27%. Conclusions, The mechanical behaviour of the NiTi wires was modified slightly by cyclic tensile loading in the superelastic plateau. As the changes tended towards stabilization, the clinical use of rotary NiTi ProFile instruments does not compromise their superelastic properties until they fracture by fatigue or torsional overload, or are otherwise discarded. [source] Questionnaire survey on the use of rotary nickel,titanium endodontic instruments by Australian dentistsINTERNATIONAL ENDODONTIC JOURNAL, Issue 4 2004P. Parashos Abstract Aim, To ascertain the extent of the adoption and use of rotary nickel,titanium (NiTi) instruments and techniques in general dental practice and specialist endodontic practice in Australia in 2001. Methodology, A questionnaire survey comprising 43 questions was developed by first creating questions, then pilot testing with 10 postgraduate students in endodontics, followed by a final revision. The final series of questions covered demographics, patterns of rotary NiTi usage, issues associated with NiTi usage and training in NiTi use. The sampling frame was 908, comprising 64 endodontists and 844 general dentists. Results, The overall response rate was 87%. Rotary NiTi instruments were used by 22% of general dentists and 64% of endodontists. The two main reasons for not using rotary NiTi were ,no perceived advantage' and ,too fragile'. Instrument fracture had been experienced by 74% of respondents, and 72% of these had fractured one to five files for the two main perceived reasons of ,excessive pressure on the file' and ,over-usage'. The next two most common problems encountered were ,binding' (53%) and ,ledging' (45%). Very high proportions of positive experiences were noted. Most respondents (73%) had attended one or more continuing education courses, most of which were provided by dental supply companies (64%). Conclusions, The results indicate a sensible and responsible approach to the incorporation of rotary NiTi instruments and techniques into root canal treatment. Dentists were aware of the limitations of the new technology, but were taking steps to become familiar with the properties and behaviour of the instruments. Instrument fracture was common, but it was of low frequency and did not deter dentists from using the technology. [source] Effects of endodontic instrument handle diameter on electromyographic activity of forearm and hand musclesINTERNATIONAL ENDODONTIC JOURNAL, Issue 2 2001T. Ozawa Abstract Aim To determine the influence of the handle diameter of endodontic instruments on forearm and hand muscle activity using electromyographic (EMG) recording. Methodology Size 45 K-type files were fitted with four different handle diameters; 3.5, 4.0, 5.0, and 6.0 mm. Seven dentists then attempted to negotiate to the working length acrylic resin root canals with each of the four handle sizes using a reaming motion. EMG activities were recorded from the flexor pollicis brevis muscle (f.p.b.), the flexor carpi radialis muscle (f.c.r.), and the brachioradialis muscle (b) with bipolar surface electrodes. The time taken to negotiate the canals, the area of integrated EMG that corresponded to the amount of EMG activity required during penetration and the maximum amplitude of EMG were measured using the EMG data. Results were analysed statistically using a one-way factorial anova test and multiple comparison tests. Results Reaming time and integrated EMG area of each muscle decreased with an increase in handle diameter. The most significant difference in time and area of integrated EMG was detected between handles of 6 mm and 3.5 mm diameter (time: P < 0.01, area of the f.p.b.: P < 0.01, area of the f.c.r. and b: P < 0.05), and between handles of 5 mm and 3.5 mm diameter (P < 0.05). Both 5 mm and 6 mm handles significantly decreased the maximum amplitude of EMG recorded from the f.p.b. compared with 3.5 mm handles (between 3.5 mm and 6 mm: P < 0.01, between 3.5 mm and 5 mm: P < 0.05). Conclusion The results indicate that handle diameter has an effect on reaming time as well as on muscle activity. As a consequence, handle diameter influenced operator performance during instrumentation. [source] Cleaning effectiveness of root canal irrigation with electrochemically activated anolyte and catholyte solutions: a pilot studyINTERNATIONAL ENDODONTIC JOURNAL, Issue 6 2000A. M. Solovyeva Abstract Aim The aim of this study was to evaluate the potential of electrochemically activated (ECA) anolyte and catholyte solutions to clean root canals during conventional root canal preparation. Methodology Twenty extracted single-rooted human mature permanent teeth were allocated randomly into four groups of five teeth. The pulp chambers were accessed and the canals prepared by hand with conventional stainless steel endodontic instruments using a double-flared technique. One or other of the following irrigants was used during preparation: distilled water, 3% NaOCl, anolyte neutral cathodic (ANC) (300 mg L,1 of active chlorine), and a combination of anolyte neutral cathodic (ANC) (300 mg L,1 of active chlorine) and catholyte. The teeth were split longitudinally and the canal walls examined for debris and smear layer by scanning electron microscopy. SEM photomicrographs were taken separately in the coronal, middle and apical parts of canal at magnification of ×800 to evaluate the debridement of extra-cellular matrix and at a magnification of ×2500 to evaluate the presence of smear layer. Results Irrigation with distilled water did not remove debris in the apical part of canals and left a continuous and firm smear layer overlying compressed low-mineralized predentine. All chemically active irrigants demonstrated improved cleaning potential compared to distilled water. The quality of loose debris elimination was similar for NaOCl and the anolyte ANC solution. The combination of anolyte ANC and catholyte resulted in improved cleaning, particularly in the apical third of canals. The evaluation of smear layer demonstrated that none of the irrigants were effective in its total removal; however, chemically active irrigants affected its surface and thickness. Compared to NaOCl, the ECA solutions left a thinner smear layer with a smoother and more even surface. NaOCl enhanced the opening of tubules predominantly in the coronal and middle thirds of canals, whereas combination of ANC and catholyte resulted in more numerous open dentine tubules throughout the whole length of canals. Conclusions Irrigation with electrochemically activated solutions cleaned root canal walls and may be an alternative to NaOCl in conventional root canal treatment. Further investigation of ECA solutions for root canal irrigation is warranted. [source] | ||||||||||