Home About us Contact
|
Home About us Contact | ||
|
|
||
End-group Modification (end-group + modification)
Selected AbstractsHydroxyl-terminated hyperbranched aromatic poly(ether-ester)s: Synthesis, characterization, end-group modification, and optical propertiesJOURNAL OF POLYMER SCIENCE (IN TWO SECTIONS), Issue 16 2008Thiyagarajan Shanmugam Abstract Novel AB2 -type monomers such as 3,5-bis(4-methylolphenoxy)benzoic acid (monomer 1), methyl 3,5-bis(4-methylolphenoxy) benzoate (monomer 2), and 3,5-bis(4-methylolphenoxy)benzoyl chloride (monomer 3) were synthesized. Solution polymerization and melt self-polycondensation of these monomers yielded hydroxyl-terminated hyperbranched aromatic poly(ether-ester)s. The structure of these polymers was established using FTIR and 1H NMR spectroscopy. The molecular weights (Mw) of the polymers were found to vary from 2.0 × 103 to 1.49 × 104 depending on the polymerization techniques and the experimental conditions used. Suitable model compounds that mimic exactly the dendritic, linear, and terminal units present in the hyperbranched polymer were synthesized for the calculation of degree of branching (DB) and the values ranged from 52 to 93%. The thermal stability of the polymers was evaluated by thermogravimetric analysis, which showed no virtual weight loss up to 200 °C. The inherent viscosities of the polymers in DMF ranged from 0.010 to 0.120 dL/g. End-group modification of the hyperbranched polymer was carried out with phenyl isocyanate, 4-(decyloxy)benzoic acid and methyl red dye. The end-capping groups were found to change the thermal properties of the polymers such as Tg. The optical properties of hyperbranched polymer and the dye-capped hyperbranched polymer were investigated using ultraviolet-absorption and fluorescence spectroscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5414,5430, 2008 [source] An efficient synthesis of telechelic poly (N -isopropylacrylamides) and its application to the preparation of ,,,-dicholesteryl and ,,,-dipyrenyl polymersJOURNAL OF POLYMER SCIENCE (IN TWO SECTIONS), Issue 1 2008Florence Segui Abstract Poly(N -isopropylacrylamide)s (PNIPAMs) with cholesteryl or pyrenyl moieties at each chain end (CH-PNIPAMs or Py-PNIPAMs) were prepared via end-group modification of ,,,-dimercapto poly(N -isopropylacrylamides), ranging in molecular weight from , 7000 to 45,000 g mol,1 with a polydispersity index of 1.10 or lower. The telechelic thiol functionalized PNIPAMs were obtained by aminolysis of ,,,-di(isobutylthiocarbonylthio)-poly(N -isopropylacrylamide)s (iBu-PNIPAMs) obtained by reversible addition-fragmentation chain transfer (RAFT) polymerization of N -isopropylacrylamide in the presence of the difunctional chain transfer agent, diethylene glycol di(2-(1-isobutyl)sulfanylthiocarbonylsulfanyl-2-methyl propionate) (DEGDIM). The self-assembly of the polymers in water was assessed by fluorescence spectroscopy, using the intrinsic emission of Py-PNIPAM or the emission of pyrene added as a probe in aqueous solutions of CH-PNIPAM. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 314,326, 2008 [source] Synthesis and properties of room temperature curable trimethoxysilane-terminated polyurethane and their dispersionsPOLYMERS FOR ADVANCED TECHNOLOGIES, Issue 8 2007Sankaraiah Subramani Abstract The purpose of this research is to study the synthesis and characterization of stable aqueous dispersions of externally chain extended polyurethane/urea compositions terminated by hydrolyzable or hydrolyzed trialkoxysilane groups incorporated through secondary amino groups. These dispersions with excellent storage stability are substantially free from organic solvents which cure to water and solvent resistant, tough, scratch resistant, preferably light stable (non-yellowing) silylated polyurethane (SPU) films. The films were characterized by FT-IR, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), tensile strength and water contact angle measurements, nanoindentation, gel content, water and xylene swellability tests. The properties of the films were discussed and correlated in detail by changing length of soft segment, diisocyanates, NCO/OH ratio and chain extender, ethylenediamine (EDA). From the results, it was found that the particle size and viscosity are lower whereas the gel content and thermal stability are higher for SPUs. Modulus, hardness and tensile properties of SPU films are superior compared to EDA-PU film. Higher water contact angle and residual weight percentage of SPU films confirm silylation of PU by [3-(phenylamino)propyl]trimethoxysilane (PAPTMS). Increase in NCO/OH ratios consumes more quantity of PAPTMS which makes PU with superior mechanical properties. Higher PAPTMS content in SPU results in effective crosslinking of the functional silanol groups formed by hydrolysis reaction of trimethoxysilane groups. Overall, SPUs synthesized at 1.4 NCO/OH ratio using Poly-(oxytetramethylene)glycol (PTMG)-2000 and isophorone diisocyanate (or) toluene-2,4-diisocyanate have excellent properties compared to SPUs prepared using PTMG-1000 and at 1.2 and 1.6 NCO/OH ratios. SPUs prepared at 1.6 NCO/OH ratio are brittle due to higher crosslinking density. In addition, the crosslinking density of the films can be modified through silane end-group modification to produce SPUs with a wide range of physical properties. Copyright © 2007 John Wiley & Sons, Ltd. [source] | ||||||||||