Home About us Contact
|
Home About us Contact | ||
|
|
||
Eddy Currents (eddy + current)
Selected AbstractsNumerical solution of eddy current problems in ferromagnetic bodies travelling in a transverse magnetic fieldINTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, Issue 12 2003W. Peterson Abstract Eddy currents are investigated in a ferromagnetic bar travelling in a transverse magnetic field. Such an open boundary field problem is analysed by a hybrid approach based on Galerkin finite element formulation coupled with a separation of variables. A steady state is considered, introducing time-periodic boundary conditions. The resultant system of non-linear equations is solved by an iterative procedure based on Brouwer's fixed-point theorem. Numerical results are presented for a bar of circular cross-section made of cast steel or cast iron. Selected examples of the field distribution and characteristics of eddy-current power losses are enclosed in graphic form. Copyright © 2003 John Wiley & Sons, Ltd. [source] Improved slice selection for R2* mapping during cryoablation with eddy current compensation,JOURNAL OF MAGNETIC RESONANCE IMAGING, Issue 1 2008Aiming Lu PhD Abstract Purpose To improve the slice profile and image quality of R2* mapping in the iceball during cryoablation with ultrashort echo time (UTE) imaging by compensating for eddy currents induced by the selective gradient when half-pulse radiofrequency (RF) excitation is employed to achieve UTEs. Materials and Methods A method to measure both B0 and linear eddy currents simultaneously is first presented. This is done with a least-square fitting process on calibration data collected on a phantom. Eddy currents during excitation are compensated by redesigning the RF pulse and the selective gradient accordingly, while that resultant from the readout gradient are compensated for during image reconstruction. In vivo data were obtained continuously during the cryoablation experiments to calculate the R2* values in the iceball and to correlate them with the freezing process. Results Image quality degradation due to eddy currents is significantly reduced with the proposed approaches. R2* maps of iceball throughout the cryoablation experiments were achieved with improved quality. Conclusion The proposed approaches are effective for compensating eddy currents during half-pulse RF excitation as well as readout. TEs as short as 100 ,sec were obtained, allowing R2* maps to be obtained from frozen tissues with improved quality. J. Magn. Reson. Imaging 2008;28:190,198. © 2008 Wiley-Liss, Inc. [source] Enhancement in electrical properties of GaN heterostructure field-effect transistor by Si atom deposition on AlGaN barrier surfacePHYSICA STATUS SOLIDI (C) - CURRENT TOPICS IN SOLID STATE PHYSICS, Issue S2 2009Norio Onojima Abstract This study demonstrates that deposition of Si atoms on AlGaN barrier surfaces in GaN heterostructure field-effect transistors (HFETs) can modulate the electrical properties of the two-dimensional electron gas (2DEG). The results of Hall measurements performed using the eddy current and four-point van der Pauw methods showed that the sheet resistance of an AlGaN/GaN HFET sample without surface passivation increased from that of the unprocessed sample after post-metallization annealing at 820 °C for ohmic contacts. In contrast, the sheet resistance of the Si-deposited sample did not increase even after annealing. Furthermore, eddy current measurements for unprocessed wafers with and without Si deposition revealed that the sheet resistance can be reduced by depositing Si atoms, regardless of annealing. The effect of Si deposition on devices having a thin Al-rich barrier layer was found to be significant. The deposition of Si atoms (2 nm) on the AlN barrier surface in an AlN/GaN HFET (AlN 2 nm) resulted in a remarkable decrease in the sheet resistance from 60356 to 388 ,/sq. (© 2009 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [source] A systematic method for the development of a three-phase transformer non-linear modelINTERNATIONAL JOURNAL OF CIRCUIT THEORY AND APPLICATIONS, Issue 8 2010Andreas D. Theocharis Abstract In this work, a novel three-phase transformer non-linear model is developed. The proposed model takes into account the magnetic core topology and the windings connections. The non-linear characteristic curve of the core material is introduced by its magnetization curve or by its hysteresis loop using the mathematical hysteresis model proposed by Tellinen or the macroscopic hysteresis model proposed by Jiles,Atherton. The eddy currents effects are included through non-linear resistors using Bertotti's work. The proposed model presents several advantages. An incremental linear circuit, having the same topology with the magnetic circuit of the core, is used in order to directly write the differential equations of the magnetic part of the transformer. The matrix Ld that describes the coupling between the windings of the transformer is systematically derived. The electrical equations of the transformer can be easily written for any possible connection of the primary and secondary windings using the unconnected windings equations and transformation matrices. The proposed methods for the calculation of the coupling between the windings, the representation of the eddy currents and the inclusion of the core material characteristic curve can be used to develop a transformer model appropriate for the EMTP/ATP-type programs. Copyright © 2009 John Wiley & Sons, Ltd. [source] Improved slice selection for R2* mapping during cryoablation with eddy current compensation,JOURNAL OF MAGNETIC RESONANCE IMAGING, Issue 1 2008Aiming Lu PhD Abstract Purpose To improve the slice profile and image quality of R2* mapping in the iceball during cryoablation with ultrashort echo time (UTE) imaging by compensating for eddy currents induced by the selective gradient when half-pulse radiofrequency (RF) excitation is employed to achieve UTEs. Materials and Methods A method to measure both B0 and linear eddy currents simultaneously is first presented. This is done with a least-square fitting process on calibration data collected on a phantom. Eddy currents during excitation are compensated by redesigning the RF pulse and the selective gradient accordingly, while that resultant from the readout gradient are compensated for during image reconstruction. In vivo data were obtained continuously during the cryoablation experiments to calculate the R2* values in the iceball and to correlate them with the freezing process. Results Image quality degradation due to eddy currents is significantly reduced with the proposed approaches. R2* maps of iceball throughout the cryoablation experiments were achieved with improved quality. Conclusion The proposed approaches are effective for compensating eddy currents during half-pulse RF excitation as well as readout. TEs as short as 100 ,sec were obtained, allowing R2* maps to be obtained from frozen tissues with improved quality. J. Magn. Reson. Imaging 2008;28:190,198. © 2008 Wiley-Liss, Inc. [source] Application of k -space energy spectrum analysis for inherent and dynamic B0 mapping and deblurring in spiral imagingMAGNETIC RESONANCE IN MEDICINE, Issue 4 2010Trong-Kha Truong Abstract Spiral imaging is vulnerable to spatial and temporal variations of the amplitude of the static magnetic field (B0) caused by susceptibility effects, eddy currents, chemical shifts, subject motion, physiological noise, and system instabilities, resulting in image blurring. Here, a novel off-resonance correction method is proposed to address these issues. A k -space energy spectrum analysis algorithm is first applied to inherently and dynamically generate a B0 map from the k -space data at each time point, without requiring any additional data acquisition, pulse sequence modification, or phase unwrapping. A simulated phase evolution rewinding algorithm and an automatic residual deblurring algorithm are then used to correct for the blurring caused by both spatial and temporal B0 variations, resulting in a high spatial and temporal fidelity. This method is validated against conventional B0 mapping and deblurring methods, and its advantages for dynamic MRI applications are demonstrated in functional MRI studies. Magn Reson Med, 2010. © 2010 Wiley-Liss, Inc. [source] Robust automated shimming technique using arbitrary mapping acquisition parameters (RASTAMAP)MAGNETIC RESONANCE IN MEDICINE, Issue 5 2004L. Martyn Klassen Abstract Quantitative MRI techniques as well as methods such as blood oxygen level-dependent (BOLD) imaging and in vivo spectroscopy require stringent optimization of magnetic field homogeneity, particularly when using high main magnetic fields. Automated shimming approaches require a method of measuring the main magnetic field, B0, followed by adjusting the currents in resistive shim coils to maximize homogeneity. A robust automated shimming technique using arbitrary mapping acquisition parameters (RASTAMAP) using a 3D multiecho gradient echo sequence that measures B0 with high precision was developed. Inherent compensation and postprocessing methods enable removal of artifacts due to hardware timing errors, gradient propagation delays, gradient amplifier asymmetry, and eddy currents. This allows field maps to be generated for any field of view, bandwidth, resolution, or acquisition orientation without custom tuning of sequence parameters. Field maps of an aqueous phantom show ± 1 Hz variation with altered acquisition orientations and bandwidths. Subsequent fitting of measured shim coil field maps allows calculation of shim currents to produce optimum field homogeneity. Magn Reson Med 51:881,887, 2004. © 2004 Wiley-Liss, Inc. [source] On the application of a non-CPMG single-shot fast spin-echo sequence to diffusion tensor MRI of the human brainMAGNETIC RESONANCE IN MEDICINE, Issue 1 2002Mark E. Bastin Abstract The strong sensitivity of Carr-Purcell-Meiboom-Gill (CPMG) fast spin-echo (FSE) sequences, such as rapid acquisition with relaxation enhancement (RARE), to the phase of the prepared transverse magnetization means that artifact-free single-shot diffusion-weighted images can currently only be obtained with a 30,50% reduction in the signal-to-noise ratio (SNR). However, this phase sensitivity and signal loss can be addressed in FSE sequences that use quadratic phase modulation of the radiofrequency (RF) refocusing pulses to generate a sustained train of stable echoes. Here the first application of such a non-CPMG single-shot FSE (ssFSE) sequence to diffusion tensor MR imaging (DT-MRI) of the human brain is described. This approach provides high SNR diffusion-weighted images that have little or no susceptibility to poor B0 magnetic field homogeneity and the strong eddy currents typically present in DT-MRI experiments. Magn Reson Med 48:6,14, 2002. © 2002 Wiley-Liss, Inc. [source] Determination of effective anisotropy in nanocrystalline soft ribbons regarding magnetostrictive contributionsPHYSICA STATUS SOLIDI (A) APPLICATIONS AND MATERIALS SCIENCE, Issue 1 2003O. Geoffroy Abstract The effective anisotropy of nanocrystalline ribbons was determined by means of breakage/multiplication of domain walls by eddy currents under dynamical conditions. The data were interpreted in terms of the possible sources of anisotropy: random crystalline (nanograins), uniaxial (field annealing), magnetoelastic (stress). A simple model adapted from Herzer's Random Anisotropy Model describes the combination of the above terms on the wall scale. The random contribution from nanograins is short-range and averaged by the walls. On the contrary, the two other terms are long-range. The estimated stress ranges between 0.3 and 1.3 MPa, depending on the degree of recrystallisation. [source] | ||||||||||||||||