			Home About us Contact

Composite Panels (composite + panel)

Distribution by Scientific Domains

Polymers and Materials Science	83%

Selected Abstracts

Finite element modelling of fibre reinforced polymer sandwich panels exposed to heat

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, Issue 1 2004
P. Krysl
Abstract A finite element model that predicts temperature distribution in a composite panel exposed to a heat source, such as fire, is described. The panel is assumed to be composed of skins consisting of polymer matrix reinforced with fibres and a lightweight core (the paper concentrates on the crucial aspect of the problem, i.e. the behaviour of the ,hot' skin of the panel. The core is assumed not to decompose, and the ,cold' skin is treated exactly as the ,hot' skin.) It is assumed that the polymer matrix undergoes chemical decomposition. Such a model results in a set of coupled non-linear transient partial differential equations. A Galerkin finite element framework is formulated to yield a fully implicit time stepping scheme. The crucial input parameters for the model are carefully identified for subsequent experimental determination. Copyright © 2004 John Wiley & Sons, Ltd. [source]

A simple model for the prediction of the fatigue delamination growth of impacted composite panels

FATIGUE & FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES, Issue 10 2004
D. G. KATERELOS
ABSTRACT The fatigue behaviour of composite panels that have been subjected to low-velocity impact was studied. Impacted specimens were tested under compression,compression fatigue. A delamination propagation model based on the derivation of the strain energy release rate was used. The stress distribution around the initially induced delamination was derived analytically. The shape of the delamination was experimentally monitored by c-scan imaging and is assumed to be an ellipse. The orientation and aspect ratio of the ellipse were used to calculate the corresponding strain energy-release rates, which were subsequently used to predict the direction of delamination propagation. [source]

Mechanical properties of wood plastic composite panels made from waste fiberboard and particleboard

POLYMER COMPOSITES, Issue 6 2008
Majid Chaharmahali
The possibility of producing wood-plastic panels using a melt blend/hot press method was studied in this research. The studied panels were compared with conventional medium density fiberboard (MDF) and particleboard (PB) panels. Wood-plastic panels were made from high density polyethylene (as resin) and MDF waste and PB waste (as natural fiber) at 60, 70, and 80% by weight fiber loadings. Nominal density and dimensions of the panels were 1 g/cm3 and 35 × 35 × 1 cm3, respectively. Mechanical properties of the panels including flexural modulus, flexural strength, screw and nail withdrawal resistances, and impact strength were studied. Results indicated that the mechanical properties of the composites were strongly affected by the proportion of the wood flour and polymer. Maximum values of flexural modulus of wood plastic panels were reached at 70% fiber content. Flexural strength, screw and nail withdrawal resistance, and impact strength of wood plastic composites declined with the increase in fiber content from 60 to 80%. This was attributed to the lack of compatibility between the phases. The produced panels outperformed conventional PB panels regarding their mechanical properties, which were acceptable when compared with MDF panels as well. The best feature in the produced panels was their screw withdrawal resistance, which is extremely important for screw joints in cabinet making. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers [source]

Simulation and validation of resin flow during manufacturing of composite panels containing embedded impermeable inserts with the VARTM process

POLYMER COMPOSITES, Issue 4 2007
Jeffrey M. Lawrence
Modern composite materials are becoming more and more advanced as engineers are better able to take advantage of their properties. In addition to their lighter weight and net-shape manufacturing, current interest is to make these materials multifunctional. This may require one to insert various objects into the composite to achieve a variety of different goals. It is important to understand how these embedded objects will affect both the manufacturing and the structural integrity of the component. In this work, the effects of impermeable embedded inserts on the infusion stage of vacuum-assisted resin transfer molding (VARTM) will be explored. In VARTM, one places a distribution media on top of the preform to aid the filling as the resin will first fill the face of the preform in contact with the distribution media and will then infuse the preform in the thickness direction. However, if one has an embedded impermeable insert in the thickness direction, it will obstruct the flow in the region below the embedded object. Several case studies are conducted to understand the effect of the geometry and placement of the embedded insert and the distribution media lay out and properties on the impregnation of the resin into the fiber preform. Finally, an approach is outlined to modify the layout of the distribution media in order to ensure a complete saturation of the preform under all but the most extreme conditions. The approach is validated with experiments. POLYM. COMPOS., 28:442,450, 2007. © 2007 Society of Plastics Engineers [source]

Effect of temperature on hygroscopic thickness swelling rate of composites from lignocellolusic fillers and HDPE

POLYMER COMPOSITES, Issue 11 2009
Abdollah Najafi
Effect of temperature on hygroscopic thickness swelling rate of lignocellolusic fillers/HDPE (high density polyethylene) composites was investigated. The composites were manufactured using a dry blend/hot press method. In this method, powder of plastic and dried powder of lignocellolusic material were mixed in high-speed mixer and then the mixed powder were pressed at 190°C. Lignocellolusic fillers/HDPE composites panels were made from virgin and recycled HDPE (as plastic) and wood sawdust and flour of rice hull (as filler) at 60% by weight filler loadings. Nominal density and dimensions of the panels were 1 g/cm3 and 35 × 35 × 1 cm3, respectively. Thickness swelling rate of manufactured wood plastic composites (WPCs) were evaluated by immersing them in water at 20, 40, and 60°C for reaching a certain value where no more thickness was swelled. A swelling model developed by Shi and Gardner [Compos. A, 37, 1276 (2006)] was used to study the thickness swelling process of WPCs, from which the parameter, swelling rate parameter, can be used to quantify the swelling rate. The results indicated that temperature has a significant effect on the swelling rate. The swelling rate increased as the temperature increased. The swelling model provided a good predictor of the hygroscopic swelling process of WPCs immersed in water at various temperatures. From the activation energy values calculated from the Arrhenius plots, the temperature had less effect on the thickness swelling rate for the composites including wood sawdust compared with the rice hull as filler and the composites including recycled compared with the virgin HDPE as plastic. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers [source]