Home About us Contact
|
Home About us Contact | ||
|
|
||
/clay Composites (clay + composite)
Selected AbstractsThermal stability of surfactants with amino and imido groups in poly(ethylene terephthalate)/clay compositesJOURNAL OF APPLIED POLYMER SCIENCE, Issue 6 2008Xuepei Yuan Abstract Effects of thermal stability of surfactants with amino and imido groups on thermal properties of poly(ethylene terephthalate) (PET)/clay composites were studied. The imidosilane surfactant was synthesized successfully from the imide reaction between amino silane and phthalic anhydride. TGA shows that imidosilane decomposition behaviors have two major stages according to the degradations of different functional groups. After melt extrusion, the decomposition of amino functional groups in amino surfactants decreases the thermal stability of organoclay and accelerates the degradation behaviors of PET composites. Because of the enhanced thermal stability of imidosilane surfactants, PET/imido-palygorskite (PT) composites represent enhanced thermal stability, good dispersion and low thermal expansion. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008 [source] Evaluation of polymethacrylic ionomer as compatibilizers for MCPA6/clay compositesJOURNAL OF APPLIED POLYMER SCIENCE, Issue 5 2008Tongfei Wu Abstract The compatibilization effects provided by polymethacrylic ionomer (PMMA ionomer) on monomer-casting polyamide6 (MCPA6)/clay (pristine sodium montmorillonite) composites were studied in this work. The PMMA ionomer used in this study was sodium polymethacrylate ionomer (PMMA Na+ -ionomer), which is a copolymer of methyl methacrylate and sodium methacrylate, prepared using emulsion polymerization. MCPA6/clay/PMMA Na+ -ionomer composites were prepared by in situ anionic ring-opening polymerization (AROP) of ,-caprolactam (CLA). X-ray diffraction (XRD) and transmission electron microscopy (TEM) plus rheological measurement were used to characterize those composites. The results indicated that PMMA Na+ -ionomer is a good compatibilizer for this system. With increasing PMMA Na+ -ionomer content, a better dispersion of clay layers was successfully achieved in the MCPA6 matrix. Furthermore, differential scanning calorimetry (DSC) and XRD results indicated that well dispersed silicate layers limit the mobility of the MCPA6 molecule chains to crystallize, reduce the degree crystalline, and favor the formation of the ,-crystalline form of the MCPA6 matrix. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008 [source] Synthesis and characterization of styrene butadiene rubber,Bentonite clay nanocompositesPOLYMER ENGINEERING & SCIENCE, Issue 7 2009Sugata Chakraborty In the present study, naturally occurring unfractionated bentonite clay was used to prepare styrene butadiene rubber/bentonite clay nanocomposite by latex stage blending. The bentonite clay was organo-modified by in situ resol formation by the reaction of resorcinol and formaldehyde. The latex clay mixture was co-coagulated with acid. The resulting clay masterbatch was compounded and evaluated by Fourier Transform Infrared spectroscopy, X-ray diffraction (XRD), Transmission Electron Microscopy (TEM), Energy Dispersive X-ray spectroscopy (EDS), Scanning Electron Microscopy, Thermogravimetric analysis, and Differential Scanning Calorimetry. XRD showed that the interplanar distance of the in situ resol-modified bentonite clay increased from 1.23 to 1.41 nm for the unmodified bentonite. TEM analysis indicated partial exfoliation and/or intercalation. EDS (Si and Al mapping) of the clay revealed the nature of the dispersion in the nanocomposites vis-à-vis the conventional styrene-butadiene rubber (SBR)/bentonite clay composite. Thermogravimetric analysis was used to compare the decomposition trends of the SBR/clay nanocomposites with the SBR/clay composite. The glass transition temperature of SBR/clay nanocomposites increased as compared with that of neat SBR. Substantial improvement in most of the other mechanical properties was also observed in case of the nanocomposites. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers [source] Nanostructure and micromechanical properties of reversibly crosslinked isotactic polypropylene/clay compositesJOURNAL OF APPLIED POLYMER SCIENCE, Issue 5 2010S. Bouhelal Abstract Recent developments concerning the methodology used to prepare composites of iPP and nanoclays are reported. Conventional (reactive melt mixing) and in situ preparations were performed, and the structural properties exhibited by the composites are discussed. Results suggest that the nanoclay could exhibit partial and, maybe, total exfoliation within the composites. Adhesion between the polymeric matrix and the nanoclay layers is similar to that obtained after grafting. The experimental procedure used and the analysis performed by means of the wide-angle X-ray scattering and differential scanning calorimetry techniques permit to describe, at nanoscale level, the contribution of the nanoclay to the polymer composite system. The microhardness values of the iPP,clay composites depend on the clay content and on the preparation method, and linearly correlate, according to the additivity law, with the degree of crystallinity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010 [source] Flame retardancy study on magnesium hydroxide associated with clays of different morphology in polypropylene matrixPOLYMERS FOR ADVANCED TECHNOLOGIES, Issue 6 2008B. B. Marosfoi Abstract Fire retardancy behavior of polypropylene,magnesium hydroxide,clay composites of different morphologies is presented. Layer- and needle-like clay nanoparticles in natural and organically surface modified form have been compared. Fire retardant performance of the composites was evaluated by conical combustor and by horizontal burning test, while the structure was characterized by SEM. Rheological analysis of varied temperature provided further information about the strength of the formed combustion residue. The results confirm that fibrous and layered clay nanofillers act synergistically and can be combined with MH microfillers advantageously for improving the flame retardancy of PP composites. Significant improvements were observed in combustion parameters, as well as in flammability classifications. Combination of montmorillonite and sepiolite type of clays resulted in the increased time to ignition, and markedly decreased heat release rate. These advancements are ascribed to the char stabilizer effect of nanofillers leading to increased strength of the residue. It is also concluded that not only the interaction between micro- and nanofillers, but also the nanofillers,nanofillers interaction plays a key role in fire retardant mechanism. Copyright © 2008 John Wiley & Sons, Ltd. [source] Modeling Studies of the Phase Behavior of Monomer/Polymer/Disk CompositesMACROMOLECULAR THEORY AND SIMULATIONS, Issue 6 2008Francisco Torrens Abstract The model developed by Balazs et al. to explain the phase behavior of polymer/clay composites is extended to monomer/polymer/clay composites, obtaining an expression for the free energy of a monomer/polymer/thin-disk mixture. By minimizing the free energy and calculating the chemical potentials of the three system components, phase diagrams for the monomer/disk and monomer/polymer/disk mixtures are contructed. Through the evolution and comparison of these diagrams, the effects of nanodisk size, polymer molecular mass and interaction parameters (temperature) on mixture stability and attained morphology are then studied. [source] Nanostructured polyolefins/clay composites: role of the molecular interaction at the interfacePOLYMERS FOR ADVANCED TECHNOLOGIES, Issue 6 2008Elisa Passaglia Abstract The extent of interphase interactions between polymer phase and inorganic particles is the driving force addressing the preparation/properties design in the field of the corresponding micro- and nanocomposites. In the case of preparation of nanocomposites based on polyolefins (POs) and inorganic compounds as potentially nanodispersed phase, the use of a PO with proper functional groups is necessary for the interface adhesion and stabilization of the nanostructured morphology. According to this approach, ethylene/propylene copolymers with a different propylene content were used for the preparation of nanocomposites through melt mixing with organophilic montmorillonites (OMMT). By taking into account the important role of functionalities grafted onto POs, two different synthetic approaches were compared here: (1) the dispersion of the inorganic filler was obtained by using previously functionalized POs bearing carboxylate groups as matrices; (2) the nanocomposites were prepared by performing contemporaneously the functionalization of POs (by using maleic anhydride (MAH) and/or diethyl maleate (DEM)) and the dispersion of the filler in a one-step process. The morphology of the nanocomposites as well as the variation of solubility and glass transition temperature (Tg) of the PO matrix were evaluated and tentatively discussed with reference to functionalization degrees, structure of PO, and preparation procedure. Copyright © 2008 John Wiley & Sons, Ltd. [source] Nanostructure and micromechanical properties of reversibly crosslinked isotactic polypropylene/clay compositesJOURNAL OF APPLIED POLYMER SCIENCE, Issue 5 2010S. Bouhelal Abstract Recent developments concerning the methodology used to prepare composites of iPP and nanoclays are reported. Conventional (reactive melt mixing) and in situ preparations were performed, and the structural properties exhibited by the composites are discussed. Results suggest that the nanoclay could exhibit partial and, maybe, total exfoliation within the composites. Adhesion between the polymeric matrix and the nanoclay layers is similar to that obtained after grafting. The experimental procedure used and the analysis performed by means of the wide-angle X-ray scattering and differential scanning calorimetry techniques permit to describe, at nanoscale level, the contribution of the nanoclay to the polymer composite system. The microhardness values of the iPP,clay composites depend on the clay content and on the preparation method, and linearly correlate, according to the additivity law, with the degree of crystallinity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010 [source] Preparation of photodegradable polypropylene/clay composites based on nanoscaled TiO2 immobilized organoclayPOLYMER COMPOSITES, Issue 5 2009Xiangfu Meng Photodegradable polypropylene (PP) composites were prepared via melting blending using PP and titanium dioxide (TiO2) immobilized organically modified montmorillonite (organoclay). TiO2 immobilized organoclay (TiO2 -OMT) was synthesized by immobilizing anatase TiO2 nanoparticles on organically modified clay via sol,gel method. The structure and morphology of TiO2 -OMT were characterized by XRD and scanning electron microscope (SEM), which showed that anatase TiO2 nanoparticles with the size range of 8,12 nm were uniformly immobilized on the surface of organoclay layers. Diffuse reflection UV,vis spectra revealed TiO2 -OMT had similar absorbance characters to that of commercial photocatalyst, Degussa P25. The solid-phase photocatalytic degradation of PP/TiO2 -OMT composites was investigated by FTIR, DSC, GPC and SEM. The results indicated that TiO2 -OMT enhanced the photodegradation rate of PP under UV irradiation. This was due to that immobilization of TiO2 nanoparticles on organoclay effectively avoided the formation of aggregation, and thereby increased the interface between PP and TiO2 nanoparticles. After 300 h irradiation, the average molecular weight was reduced by two orders of magnitude. This work presented a promising method for preparation of environment-friendly polymer nanocomposites. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers. [source] | ||||||||||