|
| ||
|
|
||
Cellulose Content (cellulose + content)
Selected AbstractsResource quality and stoichiometric constraints on stream ecosystem functioningFRESHWATER BIOLOGY, Issue 5 2009SALLY HLADYZ Summary 1. Resource quality and stoichiometric imbalances in carbon : nutrient ratios between consumers and resources can influence key ecosystem processes. In many streams, this has important implications for food webs that are based largely upon the utilization of terrestrial leaf-litter, which varies widely among litter types in its value as a food source for detritivores and as a substrate for microbial decomposers. 2. We measured breakdown rates and macroinvertebrate colonization of leaf-litter from a range of native and exotic plants of differing resource quality and palatability to consumers [e.g. carbon : nitrogen : phosphorus (C : N : P) ratios, lignin and cellulose content], in a field experiment. We also measured C : N : P ratios of the principal leaf-shredding invertebrates, which revealed strong stoichiometric imbalances across trophic levels: C : N and C : P ratios typically differed by at least one order of magnitude between consumers and resources, whereas N : P imbalances were less marked. Application of the threshold elemental ratio approach, which integrates animal bioenergetics and body elemental composition in examining nutrient deficiency between consumers and resources, revealed less marked C : P imbalances than those based on the simpler arithmetic differences described above. 3. Litter breakdown rates declined as nutrient imbalances widened and resource quality fell, but they were independent of whether resources were exotic or native. The principal drivers of total, microbial and invertebrate-mediated breakdown rates were lignin : N, lignin : P and fungal biomass, respectively. However, multiple regression using orthogonal predictors yielded even more efficient models of litter breakdown, as consumers responded to more than one aspect of resource quality. For example, fungal biomass and litter C : N both influenced invertebrate-mediated breakdown. 4. Large stoichiometric imbalances and changes in resource quality are likely to have serious consequences for stream ecosystem functioning, especially when riparian zones have been invaded by exotic plant species whose chemical composition differs markedly from that of the native flora. Consequently, the magnitude and direction of change in breakdown rates and, thus, resource depletion, will be driven to a large extent by the biochemical traits (rather than taxonomic identity per se) of the resident and invading flora. [source] Extraction and characterization of natural cellulose fibers from common milkweed stemsPOLYMER ENGINEERING & SCIENCE, Issue 11 2009Narendra Reddy Natural cellulose fibers with cellulose content, strength, and elongation higher than that of milkweed floss and between that of cotton and linen have been obtained from the stems of common milkweed plants. Although milkweed floss is a unique natural cellulose fiber with low density, the short length and low elongation make milkweed floss unsuitable as a textile fiber. The possibility of using the stems of milkweed plant as a source for natural cellulose fibers was explored in this research. Natural cellulose fibers extracted from milkweed stems have been characterized for their composition, structure, and properties. Fibers obtained from milkweed stems have about 75% cellulose, higher than the cellulose in milkweed floss but lower than that in cotton and linen. Milkweed stem fibers have low % crystallinity when compared with cotton and linen but the strength of the fibers is similar to cotton and elongation is higher than that of linen fibers. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers [source] Polyolefins,biofibre composites: A new way for an industrial productionPOLYMER ENGINEERING & SCIENCE, Issue 4 2007J. Soulestin Low density polyethylene (LDPE) composites based on cellulose fibres have been processed by high shear extrusion with water injection to help dispersion of fibres and release nanofibres from cellulose. Influence of extrusion parameters as shear, residence time, storage conditions of the matrix, and effect of water injection on the morphological properties of the composites have been studied using microscopy. Optimization of the extrusion parameters is necessary to reach a dispersion of the fibres. Increasing shearing forces and residence time allows limiting the presence of large aggregates of cellulose fibres. Use of powdered LDPE, even for short residence time and low shear, is efficient to produce well-dispersed composites. Injection of water during the extrusion also improves the quality of the dispersion. However, no nanofibres are observed. The main effect is a spectacular decrease of the discoloration (yellowing) due to cellulose degradation. Mechanical properties of the composites have been investigated. Young modulus increases with cellulose content and reinforcing effect is more important above 10% by weight. For well-dispersed composites, the extrusion parameters have no significant influence on the stiffness of the composites. However, due to the weakness of the interface, the ductility of composites is reduced compared with LDPE. POLYM. ENG. SCI., 47:467,476, 2007. © 2007 Society of Plastics Engineers. [source] Cell wall biochemistry and biomechanics of harvested white asparagus shoots as affected by temperatureANNALS OF APPLIED BIOLOGY, Issue 3 2008W.B. Herppich Abstract The effects of temperature on the dynamics of changes in shoot mechanical properties, cell wall components, relevant soluble sugars and respiration activity of harvested white asparagus spears were investigated during a 7-day storage period. All functional cell wall components of asparagus spears increased closely temperature dependent. The content of soluble glucose declined with a similar temporal dynamics and to a comparable degree, indicating a major carbon flow of this storage sugar into cell walls (60,70%). Irrespective of temperature, the contents of stored soluble fructose and sucrose remained more or less constant. Lower temperatures reduced cell wall development but do not significantly affect the relative carbon flow from storage sugars into cell walls or maintenance respiration. Compared with cell walls, maintenance respiration is by far the smaller carbon sink in stored asparagus spears. Temperature differentially affects the absolute amount and the relative contribution of the different cell wall components and the temporal dynamics of changes in structural carbohydrate and lignin content. At higher temperatures, secondary cell wall thickening resulted mainly from a large increase in cellulose content. The pronounced increase in the fractions of cellulose and especially lignin may stress the important role of lignin in cell wall strengthening. While the fraction of cell wall proteins decreased, those of hemicellulose and the pectic components were not influenced. [source] Biochemical, mechanical, and spectroscopic analyses of genetically engineered flax fibers producing bioplastic (poly-,-hydroxybutyrate)BIOTECHNOLOGY PROGRESS, Issue 5 2009Magdalena Wróbel-Kwiatkowska Abstract The interest in biofibers has grown in recent years due to their expanding range of applications in fields as diverse as biomedical science and the automotive industry. Their low production costs, biodegradability, physical properties, and perceived eco-friendliness allow for their extensive use as composite components, a role in which they could replace petroleum-based synthetic polymers. We performed biochemical, mechanical, and structural analyses of flax stems and fibers derived from field-grown transgenic flax enriched with PHB (poly-,-hydroxybutyrate). The analyses of the plant stems revealed an increase in the cellulose content and a decrease in the lignin and pectin contents relative to the control plants. However, the contents of the fibers' major components (cellulose, lignin, pectin) remain unchanged. An FT-IR study confirmed the results of the biochemical analyses of the flax fibers. However, the arrangement of the cellulose polymer in the transgenic fibers differed from that in the control, and a significant increase in the number of hydrogen bonds was detected. The mechanical properties of the transgenic flax stems were significantly improved, reflecting the cellulose content increase. However, the mechanical properties of the fibers did not change in comparison with the control, with the exception of the fibers from transgenic line M13. The generated transgenic flax plants, which produce both components of the flax/PHB composites (i.e., fibers and thermoplastic matrix in the same plant organ) are a source of an attractive and ecologically safe material for industry and medicine. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009 [source] Down-Regulation of Lignin Biosynthesis in Transgenic Leucaena leucocephala Harboring O -Methyltransferase GeneBIOTECHNOLOGY PROGRESS, Issue 3 2006Smita Rastogi In the present study, a 0.47 kb OMT gene construct from aspen, encoding for an enzyme O -methyltransferase (OMT, EC 2.1.1.6), in antisense orientation was used to down-regulate lignin biosynthesis in Leucaena leucocephala. The plants were transformed with Agrobacterium tumefaciens strain harboring the antisense gene, and the transformation was confirmed by PCR amplification of the npt II gene. The integration of a heterologous antisense OMT gene construct in transformed plants led to a maximum of 60% reduction in OMT activity relative to control. The evaluation of total lignin content by the Klason method revealed a maximum of 28% reduction. Histochemical analyses of stem sections depicted a reduction in lignin content and normal xylem development. The results also suggested a probable increase in aldehyde levels and a decrease in syringyl units. Lignin down-regulation was accompanied by an increase in methanol soluble phenolics to an extent that had no impact on wood discoloration, and the plants displayed a normal phenotype. Concomitantly, an increase of up to 9% in cellulose content was also observed. Upon alkali extraction, modified lignin was more extractable as evident from reduced Klason lignin in saponified residue and increased alkali soluble phenolics. The results together suggested that the extent of down-regulation of OMT activity achieved may lead to quality amelioration of Leucaena with respect to its applicability in pulp and paper manufacture as well as nutritive and easily digestible forage production. [source] Characterization of liquefied wood residues from different liquefaction conditionsJOURNAL OF APPLIED POLYMER SCIENCE, Issue 6 2007Hui Pan Abstract The amount of wood residue is used as a measurement of the extent of wood liquefaction. Characterization of the residue from wood liquefaction provides a new approach to understand some fundamental aspects of the liquefaction reaction. Residues were characterized by wet chemical analyses, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and scanning electron microscopy (SEM). The Klason lignin content of the residues decreased, while the holocellulose and ,-cellulose contents increased as the phenol to wood ratio (P/W) increased. A peak at 1735 cm,1, which was attributed to the ester carbonyl group in xylan, disappeared in the FTIR spectra of the residues from liquefied wood under a sealed reaction system, indicating significantly different effects of atmospheric versus sealed liquefaction. The crystallinity index of the residues was higher than that of the untreated wood particles and slightly increased with an increase in the P/W ratio. The SEM images of the residues showed that the fiber bundles were reduced to small-sized bundles or even single fibers as the P/W ratio increased from 1/1 to 3/1, which indicated that the lignin in the middle lamella had been dissolved prior to the cellulose during liquefaction. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007 [source] Chemical composition and construction cost for roots of Mediterranean trees, shrub species and grassland communitiesPLANT CELL & ENVIRONMENT, Issue 5 2002F. Martínez Abstract The construction cost of fine roots was studied in 23 woody species and two grassland communities, growing under natural conditions in southern Spain. Calculation of the energy (glucose) required for their synthesis was based on the quantification of chemical components present in tissues. Despite considerable differences in the chemical composition of the three life forms studied (trees, shrubs and herbaceous), detected differences in construction cost were non-significant (mean value: 1·64 ± 0·13 g glucose g,1). However, shrubs and herbaceous plants growing in more fertile habitats expended significantly less energy on root synthesis (1·58 ± 0·06 and 1·41 ± 0·05 g glucose g,1, respectively) than those growing in less fertile areas (1·80 ± 0·06 and 1·57 ± 0·1 g glucose g,1, respectively), because they contained smaller amounts of either waxes (shrubs) or lignins (herbaceous), both expensive to synthesize, and, proportionately, more cellulose; which is inexpensive to synthesize. Deciduous and evergreen tree species also differed mainly with regard to wax and cellulose contents, giving rise to a significantly higher construction cost in evergreens (1·57 ± 0·07 g glucose g,1 versus 1·78 ± 0·02 g glucose g,1). The differences observed in construction cost appeared to be due more to habitat-induced differences in chemical composition than to any intrinsic difference between the species studied. [source] | |||||||||||||