|
| ||
|
|
||
Capture Process (capture + process)
Selected AbstractsParticle capture in ciliary filter-feeding gymnolaemate and phylactolaemate bryozoans , a comparative studyACTA ZOOLOGICA, Issue 4 2010Hans Ulrik Riisgård Abstract Riisgård, H.U., Okamura, B. and Funch, P. 2009. Particle capture in ciliary filter-feeding gymnolaemate and phylactolaemate bryozoans , a comparative study. ,Acta Zoologica (Stockholm) 91: 416,425. We studied particle capture using video-microscopy in two gymnolaemates, the marine cheilostome Electra pilosa and the freshwater ctenostome Paludicella articulata, and three phylactolaemates, Fredericella sultana with a circular funnel-shaped lophophore, and Cristatella mucedo and Lophophus crystallinus, both with a horseshoe-shaped lophophore. The video-microscope observations along with studies of lophophore morphology and ultrastructure indicated that phylactolaemate and gymnolaemate bryozoans with a diversity of lophophore shapes rely on the same basic structures and mechanisms for particle capture. Our study also demonstrates that essential features of the particle capture process resemble one another in bryozoans, brachiopods and phoronids. [source] Optimization of energy usage for fleet-wide power generating system under carbon mitigation optionsAICHE JOURNAL, Issue 12 2009A. Elkamel Abstract This article presents a fleet-wide model for energy planning that can be used to determine the optimal structure necessary to meet a given CO2 reduction target while maintaining or enhancing power to the grid. The model incorporates power generation as well as CO2 emissions from a fleet of generating stations (hydroelectric, fossil fuel, nuclear, and wind). The model is formulated as a mixed integer program and is used to optimize an existing fleet as well as recommend new additional generating stations, carbon capture and storage, and retrofit actions to meet a CO2 reduction target and electricity demand at a minimum overall cost. The model was applied to the energy supply system operated by Ontario power generation (OPG) for the province of Ontario, Canada. In 2002, OPG operated 79 electricity generating stations; 5 are fueled with coal (with a total of 23 boilers), 1 by natural gas (4 boilers), 3 nuclear, 69 hydroelectric and 1 wind turbine generating a total of 115.8 TWh. No CO2 capture process existed at any OPG power plant; about 36.7 million tonnes of CO2 was emitted in 2002, mainly from fossil fuel power plants. Four electricity demand scenarios were considered over a span of 10 years and for each case the size of new power generation capacity with and without capture was obtained. Six supplemental electricity generating technologies have been allowed for: subcritical pulverized coal-fired (PC), PC with carbon capture (PC+CCS), integrated gasification combined cycle (IGCC), IGCC with carbon capture (IGCC+CCS), natural gas combined cycle (NGCC), and NGCC with carbon capture (NGCC+CCS). The optimization results showed that fuel balancing alone can contribute to the reduction of CO2 emissions by only 3% and a slight, 1.6%, reduction in the cost of electricity compared to a calculated base case. It was found that a 20% CO2 reduction at current electricity demand could be achieved by implementing fuel balancing and switching 8 out of 23 coal-fired boilers to natural gas. However, as demand increases, more coal-fired boilers needed to be switched to natural gas as well as the building of new NGCC and NGCC+CCS for replacing the aging coal-fired power plants. To achieve a 40% CO2 reduction at 1.0% demand growth rate, four new plants (2 NGCC, 2 NGCC+CCS) as well as carbon capture processes needed to be built. If greater than 60% CO2 reductions are required, NGCC, NGCC+CCS, and IGCC+CCS power plants needed to be put online in addition to carbon capture processes on coal-fired power plants. The volatility of natural gas prices was found to have a significant impact on the optimal CO2 mitigation strategy and on the cost of electricity generation. Increasing the natural gas prices resulted in early aggressive CO2 mitigation strategies especially at higher growth rate demands. © 2009 American Institute of Chemical Engineers AIChE J, 2009 [source] Time evolution and temperatures of hypervelocity impact-generated tracks in aerogelMETEORITICS & PLANETARY SCIENCE, Issue 10 2009Gerardo Dominguez Due to the fragile and heterogeneous nature of cometary dust grains, their fragments are found along the walls of tracks that are formed during the capture process. These fragments appear to experience a wide range of thermal alteration and the causes of this variation are not well understood at a theoretical level as physical models of track formation are not well developed. Here, a general model of track formation that allows for the existence of partially and completely vaporized aerogel material in tracks is developed. It is shown that under certain conditions, this general track model reduces to the kinetic "snowplow" model that has previously been proposed. It is also shown, based on energetic considerations, that track formation is dominated by an expansion that is snowplow-like in the later stages of track formation. The equation of motion for this snowplow-like stage can be solved analytically, thus placing constraints on the amount of heating experienced by cometary dust fragments embedded in track walls. It is found that the heating of these fragments, for a given impact velocity, is expected to be greater for those embedded in larger tracks. Given the expected future use of aerogels for sample return missions, the results presented here imply that the choice of aerogel compositions can have a significant effect on the modification of samples captured and retrieved by these collectors. [source] Organic compound alteration during hypervelocity collection of carbonaceous materials in aerogelMETEORITICS & PLANETARY SCIENCE, Issue 1 2009M. K. SPENCER A major challenge in understanding the organic inventory of the returned comet dust is identifying, unambiguously, which organic molecules are indigenous to the cometary particles, which are produced from carbon contamination in the Stardust aerogel, and which are cometary organics that have been modified by heating during the particle capture process. Here it is shown that 1) alteration of cometary organic molecules along impact tracks in aerogel is highly dependent on the original particle morphology, and 2) organic molecules on test-shot terminal particles are mostly preserved. These conclusions are based on two-step laser mass spectrometry (L2MS) examinations of test shots with organic-laden particles (both tracks in aerogel and the terminal particles themselves). [source] Energy relaxation processes of photo-generated carriers in Mg doped (0001)GaN and (1-101)GaNPHYSICA STATUS SOLIDI (C) - CURRENT TOPICS IN SOLID STATE PHYSICS, Issue 6 2008J. Saida Abstract Energy relaxation processes of photo-generated excess carriers in Mg doped GaN epitaxial layers were investigated at room temperature, with photoluminescence intensity correlation method using femto-second pulse laser as the excitation source. The decay curve was well fitted by exponential decay with two time constants. The slow process of the order of 100 ps was attributed to the energy relaxation of electrons in the conduction band, while the fast process of the order of several pico-seconds was attributed to the capture process in the impurity band near the valence band. Little difference has been found out between the results for (0001)GaN and those for (1-101)GaN. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [source] Optimization of energy usage for fleet-wide power generating system under carbon mitigation optionsAICHE JOURNAL, Issue 12 2009A. Elkamel Abstract This article presents a fleet-wide model for energy planning that can be used to determine the optimal structure necessary to meet a given CO2 reduction target while maintaining or enhancing power to the grid. The model incorporates power generation as well as CO2 emissions from a fleet of generating stations (hydroelectric, fossil fuel, nuclear, and wind). The model is formulated as a mixed integer program and is used to optimize an existing fleet as well as recommend new additional generating stations, carbon capture and storage, and retrofit actions to meet a CO2 reduction target and electricity demand at a minimum overall cost. The model was applied to the energy supply system operated by Ontario power generation (OPG) for the province of Ontario, Canada. In 2002, OPG operated 79 electricity generating stations; 5 are fueled with coal (with a total of 23 boilers), 1 by natural gas (4 boilers), 3 nuclear, 69 hydroelectric and 1 wind turbine generating a total of 115.8 TWh. No CO2 capture process existed at any OPG power plant; about 36.7 million tonnes of CO2 was emitted in 2002, mainly from fossil fuel power plants. Four electricity demand scenarios were considered over a span of 10 years and for each case the size of new power generation capacity with and without capture was obtained. Six supplemental electricity generating technologies have been allowed for: subcritical pulverized coal-fired (PC), PC with carbon capture (PC+CCS), integrated gasification combined cycle (IGCC), IGCC with carbon capture (IGCC+CCS), natural gas combined cycle (NGCC), and NGCC with carbon capture (NGCC+CCS). The optimization results showed that fuel balancing alone can contribute to the reduction of CO2 emissions by only 3% and a slight, 1.6%, reduction in the cost of electricity compared to a calculated base case. It was found that a 20% CO2 reduction at current electricity demand could be achieved by implementing fuel balancing and switching 8 out of 23 coal-fired boilers to natural gas. However, as demand increases, more coal-fired boilers needed to be switched to natural gas as well as the building of new NGCC and NGCC+CCS for replacing the aging coal-fired power plants. To achieve a 40% CO2 reduction at 1.0% demand growth rate, four new plants (2 NGCC, 2 NGCC+CCS) as well as carbon capture processes needed to be built. If greater than 60% CO2 reductions are required, NGCC, NGCC+CCS, and IGCC+CCS power plants needed to be put online in addition to carbon capture processes on coal-fired power plants. The volatility of natural gas prices was found to have a significant impact on the optimal CO2 mitigation strategy and on the cost of electricity generation. Increasing the natural gas prices resulted in early aggressive CO2 mitigation strategies especially at higher growth rate demands. © 2009 American Institute of Chemical Engineers AIChE J, 2009 [source] Application of the random pore model to the carbonation cyclic reactionAICHE JOURNAL, Issue 5 2009Gemma Grasa Abstract Calcium oxide has been proved to be a suitable sorbent for high temperature CO2 capture processes based on the cyclic carbonation-calcination reaction. It is important to have reaction rate models that are able to describe the behavior of CaO particles with respect to the carbonation reaction. Fresh calcined lime is known to be a reactive solid toward carbonation, but the average sorbent particle in a CaO-based CO2 capture system experiences many carbonation-calcination cycles and the reactivity changes with the number of cycles. This study applies the random pore model (RPM) to estimate the intrinsic rate parameters for the carbonation reaction and develops a simple model to calculate particle conversion with time as a function of the number of cycles, partial pressure of CO2, and temperature. This version of the RPM model integrates knowledge obtained in earlier works on intrinsic carbonation rates, critical product layer thickness, and pore structure evolution in highly cycled particles. © 2009 American Institute of Chemical Engineers AIChE J, 2009 [source] Bias dependence of internal quantum efficiency and carrier capture in a green (In,Ga)N single-quantum-well diodePHYSICA STATUS SOLIDI (C) - CURRENT TOPICS IN SOLID STATE PHYSICS, Issue S2 2009Akihiro Satake Abstract Internal quantum efficiency (IQE) and vertical capture processes of photogenerated carriers in a c -plane green (In,Ga)N single-quantum-well light-emitting-diode have been investigated by comparing variation in photoluminescence (PL) intensity as a function of applied voltage over a wide temperature range (T = 20-300 K) under direct (,ex =380 nm) and indirect (,ex = 325 nm) excitation. Under the direct excitation the PL intensity reflecting IQE shows a maximum value at +2.4 V irrespective of temperatures. However, it decreases to 23% from the maximum as temperature increases to 300 K. The PL intensity reduction observed at the optimized forward bias is much less as temperature increases under the indirect excitation. This difference observed between the two excitation conditions indicates an important role of efficient capture of photogenerated carriers into the active radiative recombination centers from the barriers under the presence of internal polarization fields. (© 2009 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [source] | ||||||||||