|
| ||
|
|
||
Blood Compatibility (blood + compatibility)
Selected AbstractsAntheraea assama Silk Fibroin-Based Functional Scaffold with Enhanced Blood Compatibility for Tissue Engineering Applications,ADVANCED ENGINEERING MATERIALS, Issue 5 2010Naresh Kasoju Abstract The architecture and surface chemistry of a scaffold determine its utility in tissue engineering (TE). Conventional techniques have limitations in fabricating a scaffold with control over both architecture and surface chemistry. To ameliorate this, in this report, we demonstrate the fabrication of an Antheraea assama silk fibroin (AASF)-based functional scaffold. AASF is a non-mulberry variety having superior qualities to mulberry SF and is largely unexplored in the context of TE. First, a 3D scaffold with biomimetic architecture is fabricated. The scaffold is subsequently made blood compatible by modifying the surface chemistry through a simple sulfation reaction. EDX and FTIR analysis demonstrate the successful sulfation of the scaffold. SEM observations reveal that sulfation has no any effect on the scaffold architecture. TGA reveals that it has increased thermal stability. The sulfation reaction significantly improves the overall hydrophilicity of the scaffold, as is evident from the increase in water holding capacity; this possibly enhances the blood compatibility. The enhancement in blood compatibility of the sulfated scaffold is determined from in vitro haemolysis, protein adsorption and platelet adhesion studies. The sulfated scaffold is non-toxic and supports cell adhesion and growth, as revealed by indirect and direct contact-based in vitro cytotoxicity assays. This study reveals that the AASF-based functional scaffold, which has biomimetic architecture and blood-compatible surface chemistry, could be suitable for TE applications. [source] Protein adsorption and platelet adhesion of polysulfone membrane immobilized with chitosan and heparin conjugatePOLYMERS FOR ADVANCED TECHNOLOGIES, Issue 2 2003M.-C. Yang Abstract Polysulfone (PSF) membranes were treated with ozone to introduce peroxides, and then grafted with either acrylic acid or chitosan, followed by the immobilization of heparin. The effect of spacer arm on blood compatibility was investigated using three chitosans of different molecular weight [1170 (water soluble), 160,000, and 400,000] and similar degrees of deacetylation (75%). The hydrophilicity was evaluated by measuring the contact angle of water. Blood compatibility was evaluated using the activated partial thromboplastin time (APTT) as well as the adhesion of platelets. The protein affinity was determined by the absorption of human serum albumin (HSA) and human plasma fibrinogen (HPF). The results show that by the coupling of chitosan, the amount of heparin immobilized can be increased by four times. Water contact angle (from 78,° to 41,°) decreased with the increase of the amount of heparin immobilized, showing increased wettability. The heparinized PSF membrane showed longer APTT and decreasing platelet adhesion, compared to that of unmodified PSF membrane. The adsorption of HSA and HPF were reduced to 17 and 6%, respectively. This suggests that longer spacer binding to heparin can increase the opportunity of anti-coagulation on contacting blood. These results demonstrated that the hydrophilicity and blood compatibility of PSF membrane could be improved by chitosan and heparin conjugate. Copyright © 2003 John Wiley & Sons, Ltd. [source] Probabilities of heart donors arising within specified times for child recipientsJOURNAL OF PAEDIATRICS AND CHILD HEALTH, Issue 1-2 2007John C Galati Aim: To determine the availability of donor hearts for children of different blood group and weight needing urgent heart transplantation. Methods: Data maintained by the Australia and New Zealand Organ Donor Registry 1989,2004 were analysed to determine the frequency of donation. Probabilities of suitable donor availability within 10, 20, 30, 40, 60, 90 and 180 days were estimated using a Poisson model with the assumptions that traditional ABO blood compatibilities applied, suitable donors were 0.8,4.0 times the recipient's body weight (BW) and suitable adult donors were aged <40 years. Results: Probabilities of suitable donor availability increase with passage of time from 10 to 180 days and decrease with competition from other needful recipients. Maximum suitable donor availability occurs for children of all blood groups at body weight 20 kg. The probabilities of a donor heart arising within 40 days (maximum safe duration of extracorporeal membrane oxygenation support locally available for young children) for this recipient body weight according to blood group is 0.89, 0.85, 0.73, 0.67 (AB, A, B, O). Probabilities for recipients of BW 3 kg and 60 kg respectively are 0.16, 0.14, 0.10, 0.09 (AB, A, B, O) and 0.66, 0.61, 0.47, 0.42 (AB, A, B, O). Conclusion: Expectation of suitable heart donation arising within 40 days for needful recipients in Australia is low for infants (probability <0.3), moderate for small children (probability 0.5,0.9) and modest for large children (probability 0.4,0.7), with variation at all body weights according to blood group and waiting time. [source] Antheraea assama Silk Fibroin-Based Functional Scaffold with Enhanced Blood Compatibility for Tissue Engineering Applications,ADVANCED ENGINEERING MATERIALS, Issue 5 2010Naresh Kasoju Abstract The architecture and surface chemistry of a scaffold determine its utility in tissue engineering (TE). Conventional techniques have limitations in fabricating a scaffold with control over both architecture and surface chemistry. To ameliorate this, in this report, we demonstrate the fabrication of an Antheraea assama silk fibroin (AASF)-based functional scaffold. AASF is a non-mulberry variety having superior qualities to mulberry SF and is largely unexplored in the context of TE. First, a 3D scaffold with biomimetic architecture is fabricated. The scaffold is subsequently made blood compatible by modifying the surface chemistry through a simple sulfation reaction. EDX and FTIR analysis demonstrate the successful sulfation of the scaffold. SEM observations reveal that sulfation has no any effect on the scaffold architecture. TGA reveals that it has increased thermal stability. The sulfation reaction significantly improves the overall hydrophilicity of the scaffold, as is evident from the increase in water holding capacity; this possibly enhances the blood compatibility. The enhancement in blood compatibility of the sulfated scaffold is determined from in vitro haemolysis, protein adsorption and platelet adhesion studies. The sulfated scaffold is non-toxic and supports cell adhesion and growth, as revealed by indirect and direct contact-based in vitro cytotoxicity assays. This study reveals that the AASF-based functional scaffold, which has biomimetic architecture and blood-compatible surface chemistry, could be suitable for TE applications. [source] Bacterial adhesion to diamond-like carbon as compared to stainless steelJOURNAL OF BIOMEDICAL MATERIALS RESEARCH, Issue 2 2009Antti Soininen Abstract Recent studies suggest that diamond-like carbon (DLC) coatings are suitable candidates for application on biomedical devices and implants, due to their high hardness, low friction, high wear and corrosion resistance, chemical inertness, smoothness, and tissue and blood compatibility. However, most studies have neglected the potential susceptibility of DLC coatings to bacterial adhesion, which is the first step in the development of implant-related infections. This study compares adhesion of seven bacterial strains, commonly implicated in implant-related infections, to tetrahedral amorphous carbon, with their adhesion to AISI 316L surgical steel. The results show that bacterial adhesion to DLC was similar to the adhesion to commonly used stainless steel. This suggests that DLC coating can be advantageously used on implants made of AISI 316L or other materials without increasing the risk to implant-related infections. © 2009 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2009 [source] The preparation and properties of dextrin-graft-acrylic acid/montmorillonite superabsorbent nanocompositePOLYMER COMPOSITES, Issue 7 2009Xin Ding A novel superabsorbent nanocomposite was synthesized through intercalation polymerization of partially neutralized acrylic acid, gelatinized dextrin, and an organic-montmorillonite powder using N,N -methylenebisacrylamide as a crosslinker, Span-60 as a dispersant, and ammonium persulfate together with sodiumsulfite as a type of mixed redox initiator. Effects of the amount of them on water absorbency of the superabsorbent were investigated. The structure and the morphology of the nanocomposite were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, and transmission electron microscopy analysis. The blood compatibility of the composite was primarily measured. The results show that the acrylic acid monomer was successfully intercalated into the organic-montmorillonite layers and bonded with them. The superabsorbent nanocomposite synthesized under optimal conditions with an organic-montmorillonite powder content of 5 wt% exhibit an absorption of 725.3 g/g in distilled water and favorable blood compatibility. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers [source] Preparation and characterization of tetracycline-loaded interpenetrating polymer networks of carboxymethyl cellulose and poly(acrylic acid): water sorption and drug release studyPOLYMER INTERNATIONAL, Issue 10 2005Anil Kumar Bajpai Abstract Tetracycline (TC)-loaded ionic interpenetrating polymer networks (IPNs) of carboxymethyl cellulose (CMC) and crosslinked poly(acrylic acid) (PAA) were prepared and characterized by infrared spectral analysis, differential scanning calorimetry and scanning electron microscopy techniques. The prepared IPNs were evaluated for in vitro blood compatibility by clot formation and hemolysis methods and their water imbibitions capacity was determined. Fractional release dynamics of tetracycline was also investigated from loaded IPNs of CMC and PAA. The entrapped drug was examined for antibacterial activity and structural integrity and effects of various parameters such as percentage loading of the drug, chemical composition of the carrier IPN, pH and temperature of the release medium were investigated on the release profiles of TC. The drug was also released in different simulated biological fluids. Copyright © 2005 Society of Chemical Industry [source] Effect of immobilization of polysaccharides on the biocompatibility of poly(butyleneadipate- co -terephthalate) filmsPOLYMERS FOR ADVANCED TECHNOLOGIES, Issue 8 2010Win-Chun Jao Abstract Aiming to improve the hydrophilicity, antibacterial activity, cytocompatibility, and hemocompatibility of poly(butyleneadipate- co -terephthalate) (PBAT) films, PBAT films were treated with ozone, grafted with chitosan (CS), and followed by covalent immobilization of either heparin (HEP) or hyaluronic acid (HA). The surface graft density of modified PBAT films was detected by X-ray photoelectron spectroscopy (XPS) and dyeing. The surface roughness of PBAT films was measured using an atomic force microscope (AFM). After immobilizing CS, PBAT films acquired antibacterial activity against Staphylococcus aureus and Escherichia coli. The adsorption of human serum albumin (HSA) and human plasma fibrinogen (HPF) on PBAT,CS,HEP and PBAT,CS,HA films was lower compared to that of native PBAT. Moreover, HEP immobilization could effectively reduce platelet adhesion and prolong the blood coagulation time, thereby improving the blood compatibility of PBAT. In addition, the growth of L929 fibroblasts was improved for HEP or HA immobilized PBAT, suggesting this surface modification was non-cytotoxic. Furthermore, PBAT,CS,HEP and PBAT,CS,HA exhibited higher cell proliferation than native PBAT. Copyright © 2009 John Wiley & Sons, Ltd. [source] Protein adsorption and platelet adhesion of polysulfone membrane immobilized with chitosan and heparin conjugatePOLYMERS FOR ADVANCED TECHNOLOGIES, Issue 2 2003M.-C. Yang Abstract Polysulfone (PSF) membranes were treated with ozone to introduce peroxides, and then grafted with either acrylic acid or chitosan, followed by the immobilization of heparin. The effect of spacer arm on blood compatibility was investigated using three chitosans of different molecular weight [1170 (water soluble), 160,000, and 400,000] and similar degrees of deacetylation (75%). The hydrophilicity was evaluated by measuring the contact angle of water. Blood compatibility was evaluated using the activated partial thromboplastin time (APTT) as well as the adhesion of platelets. The protein affinity was determined by the absorption of human serum albumin (HSA) and human plasma fibrinogen (HPF). The results show that by the coupling of chitosan, the amount of heparin immobilized can be increased by four times. Water contact angle (from 78,° to 41,°) decreased with the increase of the amount of heparin immobilized, showing increased wettability. The heparinized PSF membrane showed longer APTT and decreasing platelet adhesion, compared to that of unmodified PSF membrane. The adsorption of HSA and HPF were reduced to 17 and 6%, respectively. This suggests that longer spacer binding to heparin can increase the opportunity of anti-coagulation on contacting blood. These results demonstrated that the hydrophilicity and blood compatibility of PSF membrane could be improved by chitosan and heparin conjugate. Copyright © 2003 John Wiley & Sons, Ltd. [source] Concept for a New Hydrodynamic Blood Bearing for Miniature Blood Pumps,ARTIFICIAL ORGANS, Issue 10 2004Thomas Kink Abstract: The most crucial element of a long-term implantable rotary blood pump is the rotor bearing. Because of heat generation and power loss resulting from friction, seals within the devices have to be avoided. Actively controlled magnetic bearings, although maintenance-free, increase the degree of complexity. Hydrodynamic bearings for magnetically coupled rotors may offer an alternative solution to this problem. Additionally, for miniature pumps, the load capacity of hydrodynamic bearings scales slower than that of, for example, magnetic bearings because of the cube-square-law. A special kind of hydrodynamic bearing is a spiral groove bearing (SGB), which features an excellent load capacity. Mock-loop tests showed that SGBs do not influence the hydraulic performance of the tested pumps. Although, as of now, the power consumption of the SBG is higher than for a mechanical pivot bearing, it is absolutely contact-free and has an unlimited lifetime. The liftoff of the rotor occurs already at 10% of design speed. Further tests and flow visualization studies on scaled-up models must demonstrate its overall blood compatibility. [source] Development of a Novel Polyimide Hollow-fiber OxygenatorARTIFICIAL ORGANS, Issue 5 2004Motohiro Niwa Abstract:, We have developed a membrane oxygenator using a novel asymmetric polyimide hollow fiber. The hollow fibers are prepared using a dry/wet phase-inversion process. The gas transfer rates of O2 and CO2 through the hollow fibers are investigated in gas,gas and gas,liquid systems. The polyimide hollow fiber has an asymmetric structure characterized by the presence of macrovoids, and the outer diameter of the hollow fiber is 330 µm. It is found that the polyimide hollow-fiber oxygenator can enhance the gas transfer rates of O2 and CO2, and that the hollow fiber provides excellent blood compatibility in vitro and in vivo. [source] An Evaluation of a Polyethersulfone Hollow Fiber Plasma Separator by Animal ExperimentARTIFICIAL ORGANS, Issue 1 2001Zhao Chang-sheng Abstract: Membrane plasma separators are being used routinely for therapy in various diseases. In this study, a newly developed plasma separator made of polyethersulfone (PES) hollow fibers was evaluated for its plasma filtration efficiency and blood compatibility by animal experiment. Hemolysis did not occur under the usual conditions of plasma separation. The sieving coefficients of total protein and albumin were over 95%, and the total cholesterol was over 90% throughout the perfusions. Decreases in white blood cells, platelets, fibrinogen, and coagulation factors were observed during the early stage of plasma separation, but appear to be within acceptable ranges for clinical use. [source] | |||||||||||||