|
| ||
|
|
||
Biomimetic Mineralization (biomimetic + mineralization)
Selected AbstractsBiomimetic Composites: Protein Localization in Silica Nanospheres Derived via Biomimetic Mineralization (Adv. Funct.ADVANCED FUNCTIONAL MATERIALS, Issue 18 2010Mater. Abstract Lysozyme-templated precipitation of silica synthesized by sol-gel chemistry produces a composite material with antimicrobial properties. This study investigates the structural properties of the composite material that allow for retention of the antimicrobial activity of lysozyme. Scanning (SEM) and transmission (TEM) electron microscopy reveal that the composite has a hierarchical structure composed of quasi-spherical structures (,450 nm diameter), which are in turn composed of closely packed spherical structures of ,8,10 nm in diameter. Using small-angle neutron scattering (SANS) with contrast variation, the scattering signatures of the lysozyme and silica within the composite were separated. It was determined that the lysozyme molecules are spatially correlated in the material and form clusters with colloidal silica particles. The size of the clusters determined by SANS agrees well with the structural architecture observed by TEM. BET analysis revealed that the surface area of the composite is relatively low (4.73 m2/g). However, after removal of the protein by heating to 200 °C, the surface area is increased by ,20%. In addition to demonstrating a well organized sol-gel synthesis which generates a functional material with antimicrobial applications, the analysis and modeling approaches described herein can be used for characterizing a wide range of mesoporous and ultrastructural materials. [source] Protein Localization in Silica Nanospheres Derived via Biomimetic MineralizationADVANCED FUNCTIONAL MATERIALS, Issue 18 2010Mateus B. Cardoso Abstract Lysozyme-templated precipitation of silica synthesized by sol-gel chemistry produces a composite material with antimicrobial properties. This study investigates the structural properties of the composite material that allow for retention of the antimicrobial activity of lysozyme. Scanning (SEM) and transmission (TEM) electron microscopy reveal that the composite has a hierarchical structure composed of quasi-spherical structures (,450 nm diameter), which are in turn composed of closely packed spherical structures of ,8,10 nm in diameter. Using small-angle neutron scattering (SANS) with contrast variation, the scattering signatures of the lysozyme and silica within the composite were separated. It was determined that the lysozyme molecules are spatially correlated in the material and form clusters with colloidal silica particles. The size of the clusters determined by SANS agrees well with the structural architecture observed by TEM. BET analysis revealed that the surface area of the composite is relatively low (4.73 m2/g). However, after removal of the protein by heating to 200 °C, the surface area is increased by ,20%. In addition to demonstrating a well organized sol-gel synthesis which generates a functional material with antimicrobial applications, the analysis and modeling approaches described herein can be used for characterizing a wide range of mesoporous and ultrastructural materials. [source] Preparation of Protamine,Titania Microcapsules Through Synergy Between Layer-by-Layer Assembly and Biomimetic MineralizationADVANCED FUNCTIONAL MATERIALS, Issue 1 2009Yanjun Jiang Abstract A novel approach combining layer-by-layer (LbL) assembly with biomimetic mineralization is proposed to prepare protamine,titiania hybrid microcapsules. More specifically, these microcapsules are fabricated by alternative deposition of positively charged protamine layers and negatively charged titania layers on the surface of CaCO3 microparticles, followed by dissolution of the CaCO3 microparticles using EDTA. During the deposition process, the protamine layer induces the hydrolysis and condensation of a titania precursor, to form the titania layer. Thereafter, the negatively charged titania layer allows a new cycle of deposition step of the protamine layer, which ensures a continuous LbL process. The morphology, structure, and chemical composition of the microcapsules are characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared, and X-ray photoelectron spectroscopy. Moreover, these protamine,titania hybrid microcapsules are first employed as the carrier for the immobilization of yeast alcohol dehydrogenase (YADH), and the encapsulated YADH displays enhanced recycling stability. This approach may open a facile, general, and efficient way to prepare organic,inorganic hybrid materials with different compositions and shapes. [source] Self-Assembled Organic,Inorganic Hybrid Elastic Crystal via Biomimetic MineralizationADVANCED MATERIALS, Issue 33 2010Halei Zhai Organic,inorganic hybrid rhombs with regular shape and a lamellar superstructure are biomimetically fabricated by the cooperative self-assembly of bovine serum albumin (BSA), sodium bis-2-ethylhexyl sulfosuccinate (AOT), and calcium phosphate (see figure). Although crystalline calcium phosphate is the main component, the hybrid crystals are elastic and they can be flexible under external stresses. [source] Preparation of Protamine,Titania Microcapsules Through Synergy Between Layer-by-Layer Assembly and Biomimetic MineralizationADVANCED FUNCTIONAL MATERIALS, Issue 1 2009Yanjun Jiang Abstract A novel approach combining layer-by-layer (LbL) assembly with biomimetic mineralization is proposed to prepare protamine,titiania hybrid microcapsules. More specifically, these microcapsules are fabricated by alternative deposition of positively charged protamine layers and negatively charged titania layers on the surface of CaCO3 microparticles, followed by dissolution of the CaCO3 microparticles using EDTA. During the deposition process, the protamine layer induces the hydrolysis and condensation of a titania precursor, to form the titania layer. Thereafter, the negatively charged titania layer allows a new cycle of deposition step of the protamine layer, which ensures a continuous LbL process. The morphology, structure, and chemical composition of the microcapsules are characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared, and X-ray photoelectron spectroscopy. Moreover, these protamine,titania hybrid microcapsules are first employed as the carrier for the immobilization of yeast alcohol dehydrogenase (YADH), and the encapsulated YADH displays enhanced recycling stability. This approach may open a facile, general, and efficient way to prepare organic,inorganic hybrid materials with different compositions and shapes. [source] A Study on Biomineralization Behavior of N -Methylene Phosphochitosan ScaffoldsMACROMOLECULAR BIOSCIENCE, Issue 10 2004Yu Ji Yin Abstract Summary: Biomimetic growth of calcium phosphate over natural polymer may be an effective approach to constituting an organic/inorganic composite scaffold for bone tissue engineering. In this work, N -methylene phosphochitosan (NMPCS) was prepared via formaldehyde addition and condensation with phosphoric acid in a step that allowed homogeneous modification without obvious deterioration in chitosan (CS) properties. The NMPCS obtained was characterized by using FT-IR and elemental analysis. The macroporous scaffolds were fabricated through a freeze-drying technique. A comparative study on NMPCS and CS scaffold biomimetic mineralization was carried out in different media, i.e, a simulated body fluid (SBF) or alternative CaCl2 and Na2HPO4 solutions respectively. Apatite formation within NMPCS and CS scaffolds was identified with FT-IR, scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) and X-ray diffractometery (XRD). The results revealed alternate soaking of the scaffolds in CaCl2 and Na2HPO4 solutions was better than soaking in SBF solution alone in relation to apatite deposition on the scaffold pore walls. Biomineralization provides an approach to improve nature derived materials, e.g., chitosan derivative NMPCS properties e.g., compressive modulus, etc. SEM image of a NMPCS/apatite composite scaffold. [source] | ||||||||||