|
| ||
|
|
||
Biological Removal (biological + removal)
Selected AbstractsStudies on bioremediation of polycyclic aromatic hydrocarbon-contaminated sediments: Bioavailability, biodegradability, and toxicity issuesENVIRONMENTAL TOXICOLOGY & CHEMISTRY, Issue 3 2003Henry H. Tabak Abstract The widespread contamination by polycyclic aromatic hydrocarbons (PAHs) has created a need for cost-effective bioremediation processes. This research studied a chronically PAH-contaminated estuarine sediment from the East River (ER; NY, USA) characterized by high concentrations of PAHs (,4,190 ppm), sulfide, and metals and a marine sediment from New York/New Jersey Harbor (NY/NJH; USA) with only trace quantities of PAHs (0.1,0.6 ppm). The focus was to examine the relationship between bioavailability of PAHs and their biological removal in a slurry system. Freshwater and marine sediment toxicity tests were conducted to measure baseline toxicity of both sediments to amphipods, aquatic worms, fathead and sheepshead minnow larvae, and a vascular plant; to determine the cause of toxicity; and to evaluate the effectiveness of the biotreatment strategies in reducing toxicity. Results showed the ER sediment was acutely toxic to all freshwater and marine organisms tested and that the toxicity was mainly caused by sulfide, PAHs, and metals present in the sediment. In spite of the high toxicity, most of the PAH compounds showed significant degradation in the aerobic sediment/water slurry system if the initial high oxygen demand due to the high sulfide content of the sediment was overcome. The removal of PAHs by biodegradation was closely related to their desorbed amount in 90% isopropanol solution during 24 h of contact, while the desorption of model PAH compounds from freshly spiked NY/NJH sediment did not describe the bioavailability of PAHs in the East River sediment well. The research improves our understanding of bioavailability as a controlling factor in bioremediation of PAHs and the potential of aerobic biodegradation for PAH removal and ecotoxicity reduction. [source] New concepts of microbial treatment processes for the nitrogen removal in wastewaterFEMS MICROBIOLOGY REVIEWS, Issue 4 2003Ingo Schmidt Abstract Many countries strive to reduce the emissions of nitrogen compounds (ammonia, nitrate, NOx) to the surface waters and the atmosphere. Since mainstream domestic wastewater treatment systems are usually already overloaded with ammonia, a dedicated nitrogen removal from concentrated secondary or industrial wastewaters is often more cost-effective than the disposal of such wastes to domestic wastewater treatment. The cost-effectiveness of separate treatment has increased dramatically in the past few years, since several processes for the biological removal of ammonia from concentrated waste streams have become available. Here, we review those processes that make use of new concepts in microbiology: partial nitrification, nitrifier denitrification and anaerobic ammonia oxidation (the anammox process). These processes target the removal of ammonia from gases, and ammonium-bicarbonate from concentrated wastewaters (i.e. sludge liquor and landfill leachate). The review addresses the microbiology, its consequences for their application, the current status regarding application, and the future developments. [source] Bioprocesses for the removal of nitrogen oxides from polluted airJOURNAL OF CHEMICAL TECHNOLOGY & BIOTECHNOLOGY, Issue 5 2005Yaomin Jin Abstract Nitrogen oxides (NOx) of environmental concern are nitrogen monoxide (NO) and nitrogen dioxide (NO2). They are hazardous air pollutants that lead to the formation of acid rain and tropospheric ozone. Both pollutants are usually present simultaneously and are, therefore, called NOx. Another compound is N2O which is found in the stratosphere where it plays a role in the greenhouse effect. Concern for environmental and health issues coupled with stringent NOx emission standards generates a need for the development of efficient low-cost NOx abatement technologies. Under such circumstances, it becomes mandatory for each NOx-emitting industry or facility to opt for proper NOx control measures. Several techniques are available to control NOx emissions: selective catalytic reduction (SCR), selective non-catalytic reduction (SNCR), adsorption, scrubbing, and biological methods. Each process offers specific advantages and limitations. Since bioprocesses present many advantages over conventional technologies for flue gas cleaning, a lot of interest has recently been shown for these processes. This article reviews the major characteristics of conventional non-biological technologies and recent advances in the biological removal of NOx from flue gases based on the catalytic activity of either eucaryotes or procaryotes, ie nitrification, denitrification, the use of microalgae, and a combined physicochemical and biological process (BioDeNOx). Relatively uncomplicated design and simple operation and maintenance requirements make biological removal a good option for the control of NOx emissions in stationary sources. Copyright © 2005 Society of Chemical Industry [source] Delignification of Pinus taeda wood chips treated with Ceriporiopsis subvermispora for preparing high-yield kraft pulps,JOURNAL OF CHEMICAL TECHNOLOGY & BIOTECHNOLOGY, Issue 4 2002Régis Mendonça Abstract Pinus taeda wood chips were treated with the white-rot fungus Ceriporiopsis subvermispora in 20-dm3 bioreactors for periods varying from 15 to 90 days. Decayed samples, non-inoculated controls and extractive-free wood samples were submitted to kraft pulping using 25% of sulfidity and different active alkali concentrations in the cooking liquor. Cooking reactions were carried out isothermally at 170,°C. Residual lignin contents of pulps prepared from biotreated wood chips were lower than those observed in pulps from the undecayed control. Delignification kinetic studies showed that the initial delignification phase was accelerated and shortened by the fungal pretreatment. At a cooking time fixed before the end of the bulk delignification phase, the fungal pretreatment provided pulps with significantly lower kappa numbers or pulps with a fixed kappa number were obtained by reducing the amount of active alkali added to the liquor. Pulps of kappa 80 were obtained both from the undecayed control cooked with 20.8% of active alkali and from the 15-day-biotreated sample cooked with only 15% of active alkali. The biopulping benefits were neither proportional to the extent of the biodelignification nor to the biological removal of some specific wood component. DFRC-determination (derivatization followed by reductive cleavage) of the amount of aryl,ether linkages in residual lignins of biotreated samples indicated an extensive depolymerization during the initial stages of biodegradation, which suggested that bio-depolymerized lignin was easily released during the first stages of cooking, resulting in a faster and shorter initial delignification phase. © 2002 Society of Chemical Industry [source] Isolation and characterization of Cupriavidus basilensis HMF14 for biological removal of inhibitors from lignocellulosic hydrolysateMICROBIAL BIOTECHNOLOGY, Issue 3 2010Nick Wierckx Summary The formation of toxic fermentation inhibitors such as furfural and 5-hydroxy-2-methylfurfural (HMF) during acid (pre-)treatment of lignocellulose, calls for the efficient removal of these compounds. Lignocellulosic hydrolysates can be efficiently detoxified biologically with microorganisms that specifically metabolize the fermentation inhibitors while preserving the sugars for subsequent use by the fermentation host. The bacterium Cupriavidus basilensis HMF14 was isolated from enrichment cultures with HMF as the sole carbon source and was found to metabolize many of the toxic constituents of lignocellulosic hydrolysate including furfural, HMF, acetate, formate and a host of aromatic compounds. Remarkably, this microorganism does not grow on the most abundant sugars in lignocellulosic hydrolysates: glucose, xylose and arabinose. In addition, C. basilensis HMF14 can produce polyhydroxyalkanoates. Cultivation of C. basilensis HMF14 on wheat straw hydrolysate resulted in the complete removal of furfural, HMF, acetate and formate, leaving the sugar fraction intact. This unique substrate profile makes C. basilensis HMF14 extremely well suited for biological removal of inhibitors from lignocellulosic hydrolysates prior to their use as fermentation feedstock. [source] Assessing the potential impact of salmon fisheries management on the conservation status of harbour seals (Phoca vitulina) in north-east ScotlandANIMAL CONSERVATION, Issue 1 2007P. M. Thompson Abstract Conservation efforts are often constrained by uncertainty over the factors driving declines in marine mammal populations. In Scotland, there is concern over the potential impact of unrecorded shooting of seals, particularly where this occurs near Special Areas of Conservation. Here, we show that the abundance of harbour seals Phoca vitulina in the Moray Firth, north-east Scotland, declined by 2,5% per annum between 1993 and 2004. Records from local salmon fisheries and aquaculture sites indicated that 66,327 harbour seals were shot each year between 1994 and 2002. Matrix models and estimates of potential biological removal indicate that this level of shooting is sufficient to explain observed declines. Nevertheless, uncertainty over the number and identity of seals shot means that other factors such as changes in food availability may be contributing. Recent conservation measures markedly reduced the recorded levels of shooting in 2003 and 2004. In 2005, a coordinated management plan was developed to protect salmon fisheries interests while minimizing impacts on local seal populations. Comprehensive monitoring of future population trends and improved regulation of culls are now required to provide more robust assessments of the impact of human persecution on harbour seal populations in the Moray Firth and in other parts of the UK. [source] Effects of process stability on anaerobic biodegradation of LAS in UASB reactorsBIOTECHNOLOGY & BIOENGINEERING, Issue 7 2005Trine Løbner Abstract Anaerobic biodegradation of linear alkylbenzene sulfonates (LAS) was studied in upflow anaerobic sludge blanket (UASB) reactors operated under mesophilic (37°C) and thermophilic (55°C) conditions. LAS C12 concentration in the influents was 10 mg·L,1, and the hydraulic retention time in the reactors was 2 days. Adsorption of LAS C12 was assessed in an autoclaved control reactor and ceased after 115 days. The reactors were operated for a minimum of 267 days; 40,80% removal of LAS C12 was observed. A temperature reduction from 55°C to 32°C for 30 h resulted in process imbalance as indicated by increase of volatile fatty acids (VFA). The imbalance was much more intense in the LAS amended reactor compared with an unamended reactor. At the same time, the process imbalance resulted in discontinued LAS removal. This finding indicates that process stability is a key factor in anaerobic biological removal of LAS. After a recovery period, the removal of LAS resumed, providing evidence of biological anaerobic LAS degradation. The removal remained constant until termination of experiments in the reactor. Biodegradation of LAS in the mesophilic reactor was at the same level as in the thermophilic reactor under stable conditions. ©2005 Wiley Periodicals, Inc. [source] | ||||||||||