Home About us Contact
|
Home About us Contact | ||
|
|
||
Waste Slurry (waste + slurry)
Selected AbstractsCombination of a urease inhibitor and a plant essential oil to control coliform bacteria, odour production and ammonia loss from cattle wasteJOURNAL OF APPLIED MICROBIOLOGY, Issue 2 2007V.H. Varel Abstract Aim:, To evaluate urea hydrolysis, volatile fatty acid (VFA) production (odour) and coliforms in cattle waste slurries after a urease inhibitor N-(n-butyl) thiophosphoric triamide (NBPT) and a plant oil component (thymol) were added. Methods and Results:, Faeces from cattle fed a diet of 70% corn silage and 30% alfalfa haylage, urine and distilled water in the ratio 50 : 35 : 15 were blended at high speed for 1 min. Triplicate aliquots of 750 ml were amended with NBPT plus or minus thymol and reblended for 1 min, and were poured into 1·6 l wide-mouth jars covered 90% with a lid. After 56 days, thymol (2000 mg kg,1 waste) in combination with NBPT (80 mg kg,1 waste) retained 5·2 g of an initial 9·2 g of urea in cattle waste slurries, compared with less than 1 g of urea retained when NBPT was the only additive (P < 0·05). Another experiment using excreta from cattle fed 76·25% high moisture corn, 19·25% corn silage and a 4·5% supplement, blended at a low speed, gave a similar response with urea hydrolysis; and the two treatments, thymol alone and thymol in combination with NBPT, reduced VFA production (P < 0·01) and eliminated all coliform bacteria by day 1. A third experiment indicated coliforms disappeared in the no addition treatment after 8 days; however, they were viable at 6·6 × 104 CFU g,1 waste beyond 35 days in the NBPT treatment. Conclusions:, Thymol supplements the effect of NBPT by increasing the inhibitory period for hydrolysis of urea in cattle waste slurries and nitrogen retention in the waste. Significance and Impact of the Study:, Thymol and NBPT offer the potential to reduce odour and pathogens in cattle manure, and increase the fertilizer value. [source] CMP wastewater management using the concepts of design for environmentENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY, Issue 1 2002Gordon C. C. YangArticle first published online: 20 APR 200 Application of design for environment (DfE) concepts to management of wastewater from chemical mechanical polishing (CMP) processes are presented in this paper. Today, DfE is a prevailing concept and is widely adopted by advanced nations in lieu of the traditional "command and control" approach to control waste and toxic emissions. Designing environmentally-benign processes and products is a new and challenging frontier for engineering professionals, including those in the semiconductor industry. An insatiable need for water and subsequent wastewater treatment has imposed a chilling effect on semiconductor industry growth. It was estimated that semiconductor producers consumed more than 5.523 × 108 m3 of water in 2000. Of this amount, CMP processes accounted for 40% of the total. The CMP tool market and CMP slurry market are estimated to have 36% and 29% annual growth rates, respectively between 2000 and 2005. Inevitably, a tremendous amount of waste slurry and post-CMP rinse water will be generated and have to be managed properly. CMP wastewater is characterized by its high content of suspended solids having sub-micron particle sizes, high turbidity, and high conductivity. Traditional wastewater treatment technologies, such as chemical coagulation/precipitation, do not work well for CMP wastewater, because it would generate a large volume of sludge, which might cause disposal problems in many countries, such as Taiwan. Therefore, utilizing pollution prevention principles in the design of CMP tools, development of new CMP slurries, and improved plant operations are necessary to minimize environmental damage. Reclamation of process water is also a common requirement in the semiconductor industry. To this end, several alternatives for source reduction of CMP wastewater and water reclamation are presented in this paper. [source] Persistence of Shiga toxin-producing Escherichia coli O26 in cow slurryLETTERS IN APPLIED MICROBIOLOGY, Issue 1 2007B. Fremaux Abstract Aims: The main objective of this study was to evaluate the growth and survival of Shiga toxin-producing Escherichia coli (STEC) O26 in cow slurry; this serogroup is regarded as an important cause of STEC-associated diseases. Methods and Results: Four STEC were examined by polymerase chain reaction (PCR) to determine whether they harbour key virulence determinants and also by pulsed-field gel electrophoresis (PFGE) to obtain overview fingerprints of their genomes. They were transformed with the pGFPuv plasmid and were separately inoculated at a level of 106 CFU ml,1 in 15 l of cow slurry. All STEC O26 strains could be detected for at least 3 months in cow slurry without any genetic changes. The moisture content of the slurry decreased over time to reach a final value of 75% while the pH increased from 8·5 to 9·5 units during the last 50 days. Conclusion: STEC O26 strains were able to survive in cow slurry for an extended period. Significance and Impact of the Study: Long-term storage of waste slurry should be required to reduce the pathogen load and to limit environmental contamination by STEC O26. [source] Treatment of cow-waste slurry by a microbial fuel cell and the properties of the treated slurry as a liquid manureANIMAL SCIENCE JOURNAL, Issue 6 2006Hiroshi YOKOYAMA ABSTRACT Resource recycling and the proper treatment of animal waste to reduce its environmental impact are currently important issues for the livestock industry. A microbial fuel cell (MFC), a new type of bioreactor, is expected to play roles in both waste-water purification and energy recovery. However, the generation of electricity from cow waste has not yet been examined. In this study, using an MFC, we examined the possibility of generating electricity from dairy-cow waste slurry, and analyzed the properties of the treated slurry as liquid manure for resource recycling. The MFC treatment of the slurry generated electricity in a dose-dependent manner, and the maximum power output by the MFC from a 1 g of chemical oxygen demand/L slurry was 0.34 mW/m2. After the MFC treatment, 84% of the biological oxygen demand in the slurry was removed and three essential fertilizer elements (nitrogen, phosphorus, and potassium) were retained at 84, 70, and 91% levels, respectively. The amount of ammonia nitrogen in the slurry, as an element of fast-release fertilizer, was increased by 1.9-fold. Although the treated slurry displayed properties that made it preferable as liquid manure, further studies to improve the electrical power output by the MFC are required for practical use. [source] | ||||||||||