			Home About us Contact

Vivo Implantation (vivo + implantation)

Distribution by Scientific Domains

Medical Sciences	80%

Selected Abstracts

Wet-Spun Biodegradable Fibers on Conducting Platforms: Novel Architectures for Muscle Regeneration

ADVANCED FUNCTIONAL MATERIALS, Issue 21 2009
Joselito M. Razal
Abstract Novel biosynthetic platforms supporting ex vivo growth of partially differentiated muscle cells in an aligned linear orientation that is consistent with the structural requirements of muscle tissue are described. These platforms consist of biodegradable polymer fibers spatially aligned on a conducting polymer substrate. Long multinucleated myotubes are formed from differentiation of adherent myoblasts, which align longitudinally to the fiber axis to form linear cell-seeded biosynthetic fiber constructs. The biodegradable polymer fibers bearing undifferentiated myoblasts can be detached from the substrate following culture. The ability to remove the muscle cell-seeded polymer fibers when required provides the means to use the biodegradable fibers as linear muscle-seeded scaffold components suitable for in vivo implantation into muscle. These fibers are shown to promote differentiation of muscle cells in a highly organized linear unbranched format in vitro and thereby potentially facilitate more stable integration into recipient tissue, providing structural support and mechanical protection for the donor cells. In addition, the conducting substrate on which the fibers are placed provides the potential to develop electrical stimulation paradigms for optimizing the ex vivo growth and synchronization of muscle cells on the biodegradable fibers prior to implantation into diseased or damaged muscle tissue. [source]

In vitro stage-specific chondrogenesis of mesenchymal stem cells committed to chondrocytes

ARTHRITIS & RHEUMATISM, Issue 2 2009
Wei-Hong Chen
Objective Osteoarthritis is characterized by an imbalance in cartilage homeostasis, which could potentially be corrected by mesenchymal stem cell (MSC),based therapies. However, in vivo implantation of undifferentiated MSCs has led to unexpected results. This study was undertaken to establish a model for preconditioning of MSCs toward chondrogenesis as a more effective clinical tool for cartilage regeneration. Methods A coculture preconditioning system was used to improve the chondrogenic potential of human MSCs and to study the detailed stages of chondrogenesis of MSCs, using a human MSC line, Kp-hMSC, in commitment cocultures with a human chondrocyte line, hPi (labeled with green fluorescent protein [GFP]). In addition, committed MSCs were seeded into a collagen scaffold and analyzed for their neocartilage-forming ability. Results Coculture of hPi-GFP chondrocytes with Kp-hMSCs induced chondrogenesis, as indicated by the increased expression of chondrogenic genes and accumulation of chondrogenic matrix, but with no effect on osteogenic markers. The chondrogenic process of committed MSCs was initiated with highly activated chondrogenic adhesion molecules and stimulated cartilage developmental growth factors, including members of the transforming growth factor , superfamily and their downstream regulators, the Smads, as well as endothelial growth factor, fibroblast growth factor, insulin-like growth factor, and vascular endothelial growth factor. Furthermore, committed Kp-hMSCs acquired neocartilage-forming potential within the collagen scaffold. Conclusion These findings help define the molecular markers of chondrogenesis and more accurately delineate the stages of chondrogenesis during chondrocytic differentiation of human MSCs. The results indicate that human MSCs committed to the chondroprogenitor stage of chondrocytic differentiation undergo detailed chondrogenic changes. This model of in vitro chondrogenesis of human MSCs represents an advance in cell-based transplantation for future clinical use. [source]

Establishment of Three-Dimensional Tissue-engineered Bone Constructs Under Microgravity-simulated Conditions

ARTIFICIAL ORGANS, Issue 2 2010
Fang Jin
Abstract Bone constructs have been grown in vitro with use of isolated cells, biodegradable polymer scaffolds, and bioreactors. In our work, the relationships between the composition and mechanical properties of engineered bone constructs were studied by culturing bone marrow mesenchymal stem cells (BMSCs) on ceramic bovine bone scaffolds in different environments: static flasks and dynamic culture system in rotating vessels,which was a National Aeronautics and Space Administration-recommended, ground-based, microgravity-simulating system. After 15 days of cultivation, osteogenicity was determined according to DNA and alkaline phosphatase (ALP) analysis. DNA content and ALP were higher for cells grown on dynamic culture. Subsequently, the two kinds of engineered bone constructs were selected for transplantation into Sprague-Dawley rat cranial bone defects. After 24 weeks of in vivo implantation, the engineered bone constructs under dynamic culture were found to repair the defects better, with the engineered constructs showing histologically better bone connection. Thus, this dynamic system provides a useful in vitro model to construct the functional role and effects of osteogenesis in the proliferation, differentiation, and maturation of BMSCs. These findings suggest that the hydrodynamic microgravity conditions in tissue-culture bioreactors can modulate the composition, morphology, and function of the engineered bone. [source]

A model to quantify encrustation on ureteric stents, urethral catheters and polymers intended for urological use

BJU INTERNATIONAL, Issue 4 2000
S.K.S. Choong
Objective To validate an encrustation model and to quantify encrustation on currently used urological devices and polymers intended for urological use. Materials and methods An encrustation model was validated: (i) to measure the amount of calcium leaching from the glass model and from the polymer used; (ii) to determine whether the use of a single-source or pooled urine produced similar results; (iii) to determine in vitro encrustation; and (iv) to compare the results of in vivo implantation of the same materials into the bladders of rodents with the in vitro results. A test polymer (a ureteric stent, a urethral catheter or a biomaterial) and a control silicone polymer were housed separately but received human urine from the same reservoir and under the same conditions (pH 6.0 and 37 °C) for 5 days. The amount of calcium encrustation on each polymer was measured using atomic absorption spectroscopy. Each experiment was repeated at least four times and the results expressed as an encrustation index, defined as the ratio of encrustation of the test and reference polymers. Results The amount of calcium leaching from the glass model and polymers tested was insignificant. The use of a single-source or pooled urine gave the same results in the encrustation model. The in vitro results correlated with in vivo implantation of disks into the bladders of rats. Among the commonly used ureteric stents tested, the Cook C-Flex ureteric stents encrusted least. Hydrogel-coated ureteric stents encrusted more than uncoated stents. The Bard polytetrafluoroethylene short-term urethral catheter encrusted more than the Bard hydrogel-coated long-term catheter. A plasma-activated surface modification of a synthetic biomaterial with hyaluronic acid encrusted less than silicone, a long-term biomaterial widely regarded as the ,gold standard'. Conclusion This validated encrustation model is the first to quantify encrustation on currently available ureteric stents and urethral catheters. A novel coating for a biomaterial was identified using the encrustation model, and which encrusted less than silicone. [source]

Experimental evaluation of the JenaClip transcatheter aortic valve,

CATHETERIZATION AND CARDIOVASCULAR INTERVENTIONS, Issue 3 2009
Alexander Lauten
Abstract Objective: Transcatheter techniques of aortic valve replacement are a treatment option for valvular heart disease in high-risk surgical candidates. We evaluated a self-expanding valve system with a novel mechanism of fixation in an experimental setting in an acute animal model and ex vivo in aortic root specimens. Method: A self-expanding nitinol stent containing a pericardial tissue valve was implanted in a transapical approach in 15 sheeps. The valve was introduced under fluoroscopic guidance through a 22F sheath by means of a specially designed delivery catheter. Deployment was performed on the beating heart without cardiopulmonary bypass or rapid ventricular pacing and facilitated by positioning feelers anchoring the device to the native aortic cusps. To investigate release and anchoring of the device during retrograde implantation, the stent was also implanted in aortic root specimens obtained from an autopsy series. Results: In animal experiments, stent deployment was primarily successful in 12 (80%) animals. Positioning feelers facilitated implantation by confirming the correct implantation plane of the stent and anchoring to the native aortic cusps. If primary location was not satisfactory the stent was retracted into the catheter and repositioned. After successful implantation no significant changes of hemodynamics were observed. Two animals (13%) developed ventricular fibrillation early in this experimental series due to displacement of one positioning element into a coronary ostium, major regurgitation was observed in two animals. Ex vivo evaluation of the device in aortic root specimens proved feasibility of stent release and leaflet fixation; ex vivo implantation was successful in all cases. Conclusion: .In this study, we demonstrate feasibility of a leaflet-fixation device in nondiseased aortic valves. The JenaClip provides an effective concept of fixation with positioning feelers that allows exact positioning without outflow obstruction and anchoring the valve to the native leaflets. Further studies are necessary to investigate this concept in diseased aortic valves. © 2009 Wiley-Liss, Inc. [source]