Home About us Contact
|
Home About us Contact | ||
|
|
||
Vertical Orientation (vertical + orientation)
Selected AbstractsRelation Between Vertical Orientation and Stability of Acetabular Component in the Dysplastic Hip Simulated by Nonlinear Three-dimensional Finite Element MethodARTIFICIAL ORGANS, Issue 11 2004Hisashi Oki Abstract:, In acetabular dysplasia, more vertical orientation of the acetabular component is often used to minimize the superolateral bone grafting. This study was designed to determine the effects of vertical orientation of the cup on the stability and polyethylene wear of the acetabular component in uncemented total hip arthroplasty (THA). Three-dimensional finite element models of the hemipelvis with dysplastic acetabulum were developed. Metal-backed hemispherical cups were placed in the true acetabulum with abduction angles of 35, 45, 55, and 65 degrees. It was found that more vertical orientation of the cup was associated with larger relative motion of the metal shell between the acetabulum and metal shell. Furthermore, tilting and torsional shear stresses in the model of the cup abduction angle of 65 degrees were found to be 1.7 times larger than that in the model with 35 degrees at the bone,metal shell interface. More vertically oriented cups caused larger contact stresses at the articulating surfaces of the polyethylene liners. The results suggest that the abduction angle of the acetabular component significantly influences cup loosening and polyethylene wear in, THA. [source] Catalyst-Free Efficient Growth, Orientation and Biosensing Properties of Multilayer Graphene Nanoflake Films with Sharp Edge Planes,ADVANCED FUNCTIONAL MATERIALS, Issue 21 2008Nai Gui Shang Abstract We report a novel microwave plasma enhanced chemical vapor deposition strategy for the efficient synthesis of multilayer graphene nanoflake films (MGNFs) on Si substrates. The constituent graphene nanoflakes have a highly graphitized knife-edge structure with a 2,3,nm thick sharp edge and show a preferred vertical orientation with respect to the Si substrate as established by near-edge X-ray absorption fine structure spectroscopy. The growth rate is approximately 1.6,µm min,1, which is 10 times faster than the previously reported best value. The MGNFs are shown to demonstrate fast electron-transfer (ET) kinetics for the Fe(CN)63,/4, redox system and excellent electrocatalytic activity for simultaneously determining dopamine (DA), ascorbic acid (AA) and uric acid (UA). Their biosensing DA performance in the presence of common interfering agents AA and UA is superior to other bare solid-state electrodes and is comparable only to that of edge plane pyrolytic graphite. Our work here, establishes that the abundance of graphitic edge planes/defects are essentially responsible for the fast ET kinetics, active electrocatalytic and biosensing properties. This novel edge-plane-based electrochemical platform with the high surface area and electrocatalytic activity offers great promise for creating a revolutionary new class of nanostructured electrodes for biosensing, biofuel cells and energy-conversion applications. [source] Repetition effect in visual recognition of letters1JAPANESE PSYCHOLOGICAL RESEARCH, Issue 2 2004TOSHINORI KUWANA Abstract:, This study examined the influence of the repetitive presentation of a letter on the recognition of two letters. In two experiments4, two letters, which were either identical or not, were presented successively for a short duration at different spatial locations, and the subjects were required to identify them. In Experiment 1, the presentation time of the first letter was varied, whereas that of the second letter was constant. The results revealed that a reduced performance in identifying a second letter was observed in the case that the first letter, which was identical to the second letter, could be identified correctly. Experiment 2 examined whether or not this reduction was due to the identity of the visual shape of two letters. The first letter was presented either in the usual vertical orientation or rotated orientation by 180 degrees and the second letter was constantly presented in the usual orientation. The results revealed that a reduced performance in identifying a repeated letter was observed, regardless of the orientation of the first letter. The findings from the two experiments suggested that the identity of the information in memory was a main cause of the interference effect by repetition. [source] Effects of Temporal Application Parameters on Lesion Dimensions During Transvenous Catheter CryoablationJOURNAL OF CARDIOVASCULAR ELECTROPHYSIOLOGY, Issue 2 2005HUNG-FAT TSE M.D. Background: Transvenous catheter cryoablation is a novel technique for treating cardiac arrhythmias. However, the relative importance of temporal application parameters on lesion dimension and clinical efficacy has not been studied. Methods and Results: We investigated the effects of (1) application duration: single 2.5 (2.5 × 1) versus single 5 versus double 2.5 (2.5 × 2) versus double 5 (5 × 2) minutes, (2) number of freeze,thaw cycles: single versus double, and (3) electrode contact area: horizontal versus vertical orientation, on the lesion diameter and depth during catheter cryoablation (10F, 6.5-mm tip-electrode, CryoCorÔ, San Diego) in a thigh muscle preparation. A total of 175 lesions (horizontal = 90, vertical = 85) were created in thigh muscle preparations on 10 swine. The lesion diameter and depth were significantly greater using 2.5 × 2 and 5 × 2 application modes as compared with 2.5 × 1 applications (P < 0.05). Horizontal tip-electrode orientation produced larger lesion diameter (P < 0.05), but not lesion depth as compared with vertical orientation. Multivariate analysis demonstrated that both tip-electrode orientation and duration of freeze >2.5 minutes were independent predictors for lesion diameter (P < 0.001). However, only duration of freeze >2.5 minutes was an independent predictor for lesion depth (P < 0.001). Conclusions: The dimensions of lesions created by catheter cryoablation are affected by mode of cryoablation application and electrode orientation. Increasing the duration of application, employing multiple freeze,thaw cycles at shorter cycle durations, and orienting the catheter to enhance/increase tissue contact can create a larger lesion. [source] Surface-enhanced resonance Raman spectroscopy of rifamycins on silver nanoparticles: insight into their adsorption mechanismsJOURNAL OF RAMAN SPECTROSCOPY, Issue 9 2006Barry D. Howes Abstract Three widely used antibiotics from the rifamycin family, rifamycin SV sodium salt, rifampicin and rifaximin, have been characterized by resonance Raman (RR) and surface-enhanced resonance Raman spectroscopy (SERRS). SERRS spectra were recorded using aqueous silver colloidal dispersions prepared with two reducing agents, sodium borohydride and hydroxylamine hydrochloride, for a range of pH values to identify the SERRS-active substrate surface most suitable for each of the three antibiotics. Rifampicin was found to give intense SERRS signals only for the borohydride-reduced colloid and only at pH < 7.7, whereas the hydroxylamine HCl-reduced colloid was the best substrate for rifaximin, giving considerably more intense SERRS spectra than the borohydride colloid. SERRS spectra of rifaximin were observed only at pH < 7.0. It is proposed that the marked pH dependence of the SERRS enhancement results from a transition from an anionic to a neutral zwitterionic state. SERRS spectra of rifamycin SV were not observed for any experimental conditions. The antibiotics display remarkably contrasting SERRS behaviour, reflecting differences in the nature of the substituent groups on the chromophore ring. A vibrational assignment of the RR spectra and detailed comparison between the RR and SERRS data have given insight into the mechanism of adsorption of the antibiotics onto the Ag surface. Rifampicin and rifaximin adsorb adopting an approximately similar vertical orientation of the chromophore ring with respect to the surface; however, rifampicin adsorbs by direct chemical interaction with the Ag whereas rifaximin does not form a direct bond with the Ag surface. Copyright © 2006 John Wiley & Sons, Ltd. [source] Relation Between Vertical Orientation and Stability of Acetabular Component in the Dysplastic Hip Simulated by Nonlinear Three-dimensional Finite Element MethodARTIFICIAL ORGANS, Issue 11 2004Hisashi Oki Abstract:, In acetabular dysplasia, more vertical orientation of the acetabular component is often used to minimize the superolateral bone grafting. This study was designed to determine the effects of vertical orientation of the cup on the stability and polyethylene wear of the acetabular component in uncemented total hip arthroplasty (THA). Three-dimensional finite element models of the hemipelvis with dysplastic acetabulum were developed. Metal-backed hemispherical cups were placed in the true acetabulum with abduction angles of 35, 45, 55, and 65 degrees. It was found that more vertical orientation of the cup was associated with larger relative motion of the metal shell between the acetabulum and metal shell. Furthermore, tilting and torsional shear stresses in the model of the cup abduction angle of 65 degrees were found to be 1.7 times larger than that in the model with 35 degrees at the bone,metal shell interface. More vertically oriented cups caused larger contact stresses at the articulating surfaces of the polyethylene liners. The results suggest that the abduction angle of the acetabular component significantly influences cup loosening and polyethylene wear in, THA. [source] Investigation of molecular structure of bombesin and its modified analogues nonadsorbed and adsorbed on electrochemically roughened silver surfaceBIOPOLYMERS, Issue 6 2008Edyta Podstawka Abstract This work describes the molecular structure of bombesin (BN) and its analogs on the basis of the absorption infrared and Raman results described below. In these analogues is replaced one ([D-Phe12]BN, [Tyr4]BN, and [Lys3]BN) or two ([Tyr4,D-Phe12]BN, [D-Phe12,Leu14]BN, and [Leu13 -®-Leu14]BN) amino acid residues within the peptide chain with a synthetic amino acid, creating antagonists to bombesin, which are useful in the treatment of cancer. It is also used surface enhanced Raman scattering (SERS) to study the differences and changes in the vibrational spectra of BN and its analogs, which were attached to an electrochemically roughened silver surface as these peptides interacted with target proteins. This work explores the use of SERS for molecules anchored to a macroscopic silver surface to interrogate the interaction of these peptides with protein receptors. The results presented here show that all peptides coordinate to the macroscopic silver surface through an indole ring and the methylene group of Trp8, the CO fragment, and an amide bond; however, the orientation of these fragments on the electrochemically roughened silver surface and the strength of the interactions with this surface is slightly different for each peptide. For example, the interaction of CH2 of [D-Phe12]BN, [Tyr4,D-Phe12]BN, [D-Phe12,Leu14]BN, [Leu13 -®-Leu14]BN, and [Lys3]BN with the silver surface perturbed the vertical orientation of the Trp8 indole ring on this surface. Hence, the indole ring adopted a close to perpendicular orientation on the silver surface for BN and [Tyr4]BN, only. © 2007 Wiley Periodicals, Inc. Biopolymers 89: 506,521, 2008. This article was originally published online as an accepted preprint. The "Published Online" date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com [source] Exposure of mouse preosteoblasts to pulsed electromagnetic fields reduces the amount of mature, type I collagen in the extracellular matrixJOURNAL OF ORTHOPAEDIC RESEARCH, Issue 2 2006Yoshitada Sakai Abstract We tested the hypothesis that exposure of a mouse preosteoblast cell line to pulsed electromagnetic fields (PEMF) would affect components of the extracellular matrix. We report that exposure of MC3T3-E1 cells to a single PEMF waveform significantly reduced the amount of mature, ,1(I) collagen in the extracellular matrix (ECM) and the conditioned medium, without affecting the amount of total ECM protein. This decrease was not due to changes in the steady-state level of Col1A1 mRNA or to degradation of mature collagen. We then tested the effect of three distinct PEMF waveforms, two orthogonal coil orientations, and two waveform amplitude levels on the amount of ,1(I) collagen in the conditioned medium. A sequence of factorial ANOVAs and stepwise regression modeling revealed that the period (duration) of the individual pulses accounted for a significant proportion of the variance associated with the amount of ,1(I) collagen in the conditioned medium. The total variance accounted for, however, was small (R2,=,0.155, p,<,0.001 and R2,=,0.172, p,<,0.001, in the horizontal and vertical orientations, respectively). The positive and negative regression coefficients for the coil orientations revealed that the influence of pulse period was significantly different for the orthogonal coil orientations (p,<,0.001). The findings imply that the dominant influence of PEMF on the amount of mature, ,1(I) collagen in the ECM is related to variables other than those expressed in the time-amplitude domain. The results provide objective direction toward identifying waveform characteristics that contribute to the observed between-waveform differences with regard to collagen. Advances in this area may lead toward improving waveforms and waveform delivery protocols. © 2005 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res [source] | |||||||||||||