Home About us Contact
|
Home About us Contact | ||
|
|
||
Total Analysis Time (total + analysis_time)
Selected AbstractsEfficient implicit finite element analysis of sheet forming processesINTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, Issue 8 2003A. H. van den Boogaard Abstract The computation time for implicit finite element analyses tends to increase disproportionally with increasing problem size. This is due to the repeated solution of linear sets of equations, if direct solvers are used. By using iterative linear equation solvers the total analysis time can be reduced for large systems. For plate or shell element models, however, the condition of the matrix is so ill that iterative solvers do not reach the huge time-savings that are realized with solid elements. By introducing inertial effects into the implicit finite element code the condition number can be improved and iterative solvers perform much better. An additional advantage is that the inertial effects stabilize the Newton,Raphson iterations. This also applies to quasi-static processes, for which the inertial effects finally do not affect the results. The presented method can readily be implemented in existing implicit finite element codes. Industrial size deep drawing simulations are executed to investigate the performance of the recommended strategy. It is concluded that the computation time is decreased by a factor of 5 to 10. Copyright © 2003 John Wiley & Sons, Ltd. [source] Generalization of multivariate optical computations as a method for improving the speed and precision of spectroscopic analysesJOURNAL OF CHEMOMETRICS, Issue 6 2008Marc K. Boysworth Abstract Multivariate optical computations (MOCs) offer improved analytical precision and increased speed of analysis via synchronous data collection and numerical computation with scanning spectroscopic systems. The improved precision originates in the redistribution of integration time from spurious channels to informative channels in an optimal manner for increasing the signal-to-noise ratio with multivariate analysis under the constraint of constant total analysis time. In this work, MOCs perform the multiplication and addition steps of spectral processing by adjusting the integration parameters of the optical detector or adjusting the scanning profile of the tunable optical filter. Improvement in the precision of analysis is achieved via the implicit optimization of the analytically useful signal-to-noise ratio. The speed improvements are realized through simpler data post-processing, which reduces the computation time required after data collection. Alternatively, the analysis time may be significantly truncated while still seeing an improvement in the precision of analysis, relative to competing methods. Surface plasmon resonance (SPR) spectroscopic sensors and visible reflectance spectroscopic imaging were used as test beds for assessing the performance of MOCs. MOCs were shown to reduce the standard deviation of prediction by 15% compared to digital data collection and analysis with the SPR and up to 45% for the imaging applications. Similarly, a 30% decrease in the total analysis time was realized while still seeing precision improvements. Copyright © 2008 John Wiley & Sons, Ltd. [source] Methodology Optimization for Quantification of Total Phenolics and Individual Phenolic Acids in Sweetpotato (Ipomoea batatas L.) RootsJOURNAL OF FOOD SCIENCE, Issue 7 2007M.S. Padda ABSTRACT:, Phenolic acids are one of the several classes of naturally occurring antioxidant compounds found in sweetpotatoes. Simplified, robust, and rapid methodologies were optimized to quantify total and individual phenolic acids in sweetpotato roots. Total phenolic acid content was quantified spectrophotometrically using both Folin,Denis and Folin,Ciocalteu reagents. The Folin,Ciocalteu reagent gave an overestimation of total phenolic acids due to the absorbance of interfering compounds (that is, reducing sugars and ascorbic acid). Individual phenolic acids were quantified by high-performance liquid chromatography (HPLC) using the latest in column technology. Four reversed-phase C18 analytical columns with different properties (dimensions, particle size, particle shape, pore size, and carbon load) were compared. Three different mobile phases using isocratic conditions were also evaluated. A column (4.6 × 150 mm) packed with 5-,m spherical silica particles of pore size 110 Å combined with 14% carbon load provided the best and fast separation of individual phenolic acids (that is, chlorogenic acid, caffeic acid, and 3 isomers of dicaffeoylquinic acid) with a total analysis time of less than 7 min. Among the 3 mobile phases tested, a mobile phase consisting of 1% (v/v) formic acid aqueous solution: acetonitrile: 2-propanol, pH 2.5 (70:22:8, v/v/v) gave adequate separation. Among the solvents tested, aqueous mixtures (80:20, solvent:water) of methanol and ethanol provided higher phenolic acid extraction efficiency than the aqueous mixture of acetone. [source] A rapid and sensitive liquid chromatography/positive ion tandem mass spectrometry method for the determination of cimetropium in human plasma by liquid,liquid extractionJOURNAL OF MASS SPECTROMETRY (INCORP BIOLOGICAL MASS SPECTROMETRY), Issue 7 2006Heon-Woo Lee Abstract We have developed and validated a simple detection system with high-performance liquid chromatography (HPLC) with positive ion electrospray ionization tandem mass spectrometry (ESI-MS/MS) for determining cimetropium levels in human plasma using scopolamine butyl bromide as an internal standard (I.S.). The acquisition was performed in the multiple reaction monitoring (MRM) mode, by monitoring the transitions: m/z 357.9 > 103.1 for cimetropium and m/z 359.9 > 103.1 for butyl-scopolamine. The method involves a simple single-step liquid,liquid extraction with dichloromethane. The analyte was chromatographed on an YMC C18 reversed-phase chromatographic column by isocratic elution with 10 mM ammonium formate buffer,methanol (19 : 81, v/v; adjusted to pH 4.0 with formic acid). The results were linear over the studied range (0.2,100 ng ml,1), with r2 = 1.0000, and the total analysis time for each run was 2 min. Intra- and interassay precisions were 0.70,8.54% and 1.08,4.85%, respectively, and intra- and interassay accuracies were 97.56,108.23% and 97.48,103.91%, respectively. The lower limit of quantification (LLOQ) was 0.2 ng ml,1. At this concentration, mean intra- and interassay precisions were 8.54% and 4.85%, respectively, and mean intra- and interassay accuracies were 97.56% and 98.91%, respectively. The mean recovery ranged from 62.71 ± 4.06 to 64.23 ± 2.32%. Cimetropium was found to be stable in plasma samples under typical storage and processing conditions. The devised assay was successfully applied to a pharmacokinetic study of cimetropium bromide administered as a single oral dose (150 mg) to healthy volunteers. Copyright © 2006 John Wiley & Sons, Ltd. [source] Accessible proteomics space and its implications for peak capacity for zero-, one- and two-dimensional separations coupled with FT-ICR and TOF mass spectrometryJOURNAL OF MASS SPECTROMETRY (INCORP BIOLOGICAL MASS SPECTROMETRY), Issue 3 2006Jennifer L. Frahm The number and wide dynamic range of components found in biological matrixes present several challenges for global proteomics. In this perspective, we will examine the potential of zero-dimensional (0D), one-dimensional (1D), and two-dimensional (2D) separations coupled with Fourier-transform ion cyclotron resonance (FT-ICR) and time-of-flight (TOF) mass spectrometry (MS) for the analysis of complex mixtures. We describe and further develop previous reports on the space occupied by peptides, to calculate the theoretical peak capacity available to each separations-mass spectrometry method examined. Briefly, the peak capacity attainable by each of the mass analyzers was determined from the mass resolving power (RP) and the m/z space occupied by peptides considered from the mass distribution of tryptic peptides from National Center for Biotechnology Information's (NCBI's) nonredundant database. Our results indicate that reverse-phase-nanoHPLC (RP-nHPLC) separation coupled with FT-ICR MS offers an order of magnitude improvement in peak capacity over RP-nHPLC separation coupled with TOF MS. The addition of an orthogonal separation method, strong cation exchange (SCX), for 2D LC-MS demonstrates an additional 10-fold improvement in peak capacity over 1D LC-MS methods. Peak capacity calculations for 0D LC, two different 1D RP-HPLC methods, and 2D LC (with various numbers of SCX fractions) for both RP-HPLC methods coupled to FT-ICR and TOF MS are examined in detail. Peak capacity production rates, which take into account the total analysis time, are also considered for each of the methods. Furthermore, the significance of the space occupied by peptides is discussed. Copyright © 2006 John Wiley & Sons, Ltd. [source] Measurement of caffeine and five of the major metabolites in urine by high-performance liquid chromatography/tandem mass spectrometryJOURNAL OF MASS SPECTROMETRY (INCORP BIOLOGICAL MASS SPECTROMETRY), Issue 3 2005Allan Weimann Abstract Analysis of caffeine and its metabolites is of interest with respect to caffeine exposure, for kinetic and metabolism studies and for opportunistic in vivo estimation of drug metabolizing enzyme activity in humans and animals. For the latter, analysis is usually done by high-performance liquid chromatography (HPLC) with UV detection. However, this method is close to the detection limit for certain of the metabolites and requires very long chromatography, 30,60 min. We have developed a fast method for the quantification of caffeine and its metabolites 1-methylxanthine, 1-methyluric acid, 1,7-dimethyluric acid, 5-acetylamino-6-amino-3-methyluracil (AAMU) and 5-acetylamino-6-formylamino-3-methyluracil (AFMU) by HPLC tandem mass spectrometry (MS/MS) in urine that requires only its dilution with buffer and centrifugation before injection into the HPLC/MS/MS system. The chromatography lasts 7 min and is followed by 4.5 min for re-equilibration of the HPLC column, giving a total analysis time of 11.5 min. The method provides a great sensitivity improvement with detection limits for all analytes ,25 nM in real samples. Also, the analysis provides much improvement in capacity to ,125 samples per 24 h. Intra- and inter-day coefficients of variation of a single analysis are <6.5% for all the analytes. The inter-day coefficient of variation of duplicate analyses is <4.8% for all analytes. The method is automated, including automated integration, and it is fast, robust and suitable for large-scale investigations in humans and animals. Copyright © 2005 John Wiley & Sons, Ltd. [source] Simple and rapid extraction, separation, and detection of alkaloids in beveragesJOURNAL OF SEPARATION SCIENCE, JSS, Issue 21 2008Christine L. Copper Abstract Implementation of an uncomplicated SPE process for the rapid extraction and preconcentration of the alkaloids, colchicine, strychnine, aconitine, and nicotine, from water, apple juice, and nonfat milk samples is presented. When coupled to analysis via micellar EKC (MEKC), the total analysis time per sample was less than 15 min for the water and juice samples and less than 20 min for the milk. The SPE process allowed for anywhere from a three to a fourteen-fold improvement in the LOD for each alkaloid when compared to detecting the alkaloids in a nontreated water sample matrix. Following SPE, the LODs for colchicine, strychnine, and nicotine were sufficient to meet levels from 150 to 5000 times more dilute than the LD50 for a 50 kg individual drinking 12 oz of a contaminated beverage. Aconitine, on the other hand, was detected at approximately the LD50 level. The percent recoveries for the SPE ranged from 37% to as high as 99%. Nicotine attained the highest recovery efficiencies, followed by colchicine, and finally, aconitine and strychnine, which were nearly identical. The greatest recovery efficiencies were achieved from apple juice and water, whereas nonfat milk yielded the lowest. [source] Product ion mass spectra of amphetamine-type substances, designer analogues, and ketamine using ultra-performance liquid chromatography/tandem mass spectrometry,RAPID COMMUNICATIONS IN MASS SPECTROMETRY, Issue 15 2006Luigino G. Apollonio This paper describes the application of ultra-performance liquid chromatography/tandem mass spectrometry (UPLC/MS/MS) technology to separate and identify amphetamine-type substances (amphetamine, methamphetamine), common and novel designer analogues (MDA, MDMA, PMA, 4-MTA, MBDB), and ketamine using Acquity UPLC/Micromass Quattro Micro API mass spectrometer instrumentation (Waters Corporation, USA). From injection of drug reference standards, it was demonstrated that these compounds can be identified by product ion mass spectra in less than 4,min total analysis time, indicating that the technological advancements associated with UPLC/MS/MS allow it to serve as a powerful analytical tool for high-throughput testing. In addition to demonstrating the separation and response of these drug compounds under the stated UPLC/MS/MS conditions, we believe the acquired product ion spectra will be a beneficial reference to laboratories interested in incorporating the use of this technology in the routine analysis of drugs of abuse. Copyright © 2006 John Wiley & Sons, Ltd. [source] Detection of Escherichia coli using immunomagnetic separation and bacteriophage amplification coupled with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry,RAPID COMMUNICATIONS IN MASS SPECTROMETRY, Issue 3 2003Angelo J. Madonna The application of whole cell analysis by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) has emerged as a valuable tool for rapidly identifying/detecting bacteria. This technique requires minimal sample preparation and is simple to perform, but is generally limited to purified samples of bacteria at concentrations greater than 1.0,×,106 cells/mL. In this paper, we describe a bacterial detection method that integrates immunomagnetic separation with bacteriophage amplification prior to MALDI-MS analysis. The developed method consists of three main stages: (1) isolation of a target bacterium by immunomagnetic separation; (2) infection of the immuno-captured bacterium with a lytic bacteriophage; and (3) assay of infected medium for bacteriophage progeny using MALDI-MS to produce a molecular weight signal for the virus capsid protein. With this technique, the presence of Escherichia coli in broth was determined in less then 2 h total analysis time at a concentration of ,5.0,×,104 cells/mL. Copyright © 2002 John Wiley & Sons, Ltd. [source] Direct-injection high performance liquid chromatography ion trap mass spectrometry for the quantitative determination of olanzapine, clozapine and N -desmethylclozapine in human plasmaRAPID COMMUNICATIONS IN MASS SPECTROMETRY, Issue 13 2002Manfred Kollroser A specific and sensitive direct-injection high performance liquid chromatography electrospray ionization tandem mass spectrometry (HPLC/ESI-MS/MS) method has been developed for the rapid identification and quantitative determination of olanzapine, clozapine, and N -desmethylclozapine in human plasma. After the addition of the internal standard dibenzepin and dilution with 0.1% formic acid, plasma samples were injected into the LC/MS/MS system. Proteins and other large biomolecules were removed during an online sample cleanup using an extraction column (1,×,50,mm i.d., 30,µm) with a 100% aqueous mobile phase at a flow rate of 4,mL/min. The extraction column was subsequently brought inline with the analytical column by automatic valve switching. Analytes were separated on a 5,µm Symmetry C18 (Waters) analytical column (3.0,×,150,mm) with a mobile phase of acetonitrile/0.1% formic acid (20:80, v/v) at a flow rate of 0.5,mL/min. The total analysis time was 6,min per sample. The inter- and intra-assay coefficients of variation for all compounds were <11%. By eliminating the need for extensive sample preparation, the proposed method offers very large savings in total analysis time. Copyright © 2002 John Wiley & Sons, Ltd. [source] Integrated on-chip derivatization and electrophoresis for the rapid analysis of biogenic aminesELECTROPHORESIS, Issue 14 2004Nigel P. Beard Abstract We demonstrate the monolithic integration of a chemical reactor with a capillary electrophoresis device for the rapid and sensitive analysis of biogenic amines. Fluorescein isothiocyanate (FITC) is widely employed for the analysis of amino-group containing analytes. However, the slow reaction kinetics hinders the use of this dye for on-chip labeling applications. Other alternatives are available such as o -phthaldehyde (OPA), however, the inferior photophysical properties and the UV ,max present difficulties when using common excitation sources leading to a disparity in sensitivity. Consequently, we present for the first time the use of dichlorotriazine fluorescein (DTAF) as a superior in situ derivatizing agent for biogenic amines in microfluidic devices. The developed microdevice employs both hydrodynamic and electroosmotic flow, facilitating the creation of a polymeric microchip to perform both precolumn derivatization and electrophoretic analysis. The favorable photophysical properties of the DTAF and its fast reaction kinetics provide detection limits down to 1 nM and total analysis times (including on-chip mixing and reaction) of <60 s. The detection limits are two orders of magnitude lower than current limits obtained with both FITC and OPA. The optimized microdevice is also employed to probe biogenic amines in real samples. [source] | ||||||||||