Home About us Contact
|
Home About us Contact | ||
|
|
||
Thick Sequence (thick + sequence)
Selected AbstractsMarine and human activity influences on the groundwater quality of southern Korinthos area (Greece)HYDROLOGICAL PROCESSES, Issue 12 2003G. Stamatis Abstract In this paper the groundwater quality of the southern part of Korinthos region (north-east Peloponnese) is discussed. The geology is characterized by a thick sequence of Neogene marls alternating with sandstones, overlain by superficial Quaternary deposits. The latter consist of a mixture of loose materials such as conglomerates, marly sandstones, sands and clay to silty sands. The area is crossed by a fault system parallel to the coastline, and the Quaternary sediments have formed extended Tyrrhenian marine terraces. Two aquifers have been identified in the area. The first is unconfined and occurs within the Quaternary sediments whereas the other is a deep confined aquifer occurring within the underlying Neogene marl series. Analysis of hydrochemical evolution over the past 30 years has indicated significant deterioration of quality owing to seawater intrusion and nitrate pollution. The various sources of pollution have rendered, to a large extent, shallow groundwater unsuitable not only for potable water supply but also for irrigation purposes. However, this is not the case for the deeper confined aquifer. Statistical analysis was used to explore the evolution of salinization during the years 1968 and 1998. In view of the alarming conditions caused by the documented groundwater quality deterioration, the need for integrated water resources management is stressed to maintain the socio-economic growth of the region studied. Copyright © 2003 John Wiley & Sons, Ltd. [source] Overview of the geology, petrology and tectonic framework of the high-pressure,ultrahigh-pressure metamorphic belt of the Kokchetav Massif, KazakhstanISLAND ARC, Issue 3 2000S. Maruyama Abstract High- to ultrahigh-pressure metamorphic (HP,UHPM) rocks crop out over 150 km along an east,west axis in the Kokchetav Massif of northern Kazakhstan. They are disposed within the Massif as a 2 km thick, subhorizontal pile of sheet-like nappes, predominantly composed of interlayered pelitic and psammitic schists and gneisses, amphibolite and orthogneiss, with discontinuous boudins and lenses of eclogite, dolomitic marble, whiteschist and garnet pyroxenite. On the basis of predominating lithologies, we subdivided the nappe group into four north-dipping, fault-bounded orogen-parallel units (I,IV, from base to top). Constituent metabasic rocks exhibit a systematic progression of metamorphic grades, from high-pressure amphibolite through quartz,eclogite and coesite,eclogite to diamond,eclogite facies. Coesite, diamond and other mineral inclusions within zircon offer the best means by which to clarify the regional extent of UHPM, as they are effectively sequestered from the effects of fluids during retrogression. Inclusion distribution and conventional geothermobarometric determinations demonstrate that the highest grade metamorphic rocks (Unit II: T = 780,1000°C, P = 37,60 kbar) are restricted to a medial position within the nappe group, and metamorphic grade decreases towards both the top (Unit III: T = 730,750°C, P = 11,14 kbar; Unit IV: T = 530°C, P = 7.5,9 kbar) and bottom (Unit I: T = 570,680°C; P = 7,13.5 kbar). Metamorphic zonal boundaries and internal structural fabrics are subhorizontal, and the latter exhibit opposing senses of shear at the bottom (top-to-the-north) and top (top-to-the-south) of the pile. The orogen-scale architecture of the massif is sandwich-like, with the HP,UHPM nappe group juxtaposed across large-scale subhorizontal faults, against underlying low P,T metapelites (Daulet Suite) at the base, and overlying feebly metamorphosed clastic and carbonate rocks (Unit V). The available structural and petrologic data strongly suggest that the HP,UHPM rocks were extruded as a sequence of thin sheets, from a root zone in the south toward the foreland in the north, and juxtaposed into the adjacent lower-grade units at shallow crustal levels of around 10 km. The nappe pile suffered considerable differential internal displacements, as the 2 km thick sequence contains rocks exhumed from depths of up to 200 km in the core, and around 30,40 km at the margins. Consequently, wedge extrusion, perhaps triggered by slab-breakoff, is the most likely tectonic mechanism to exhume the Kokchetav HP,UHPM rocks. [source] An international and multidisciplinary drilling project into a young complex impact structure: The 2004 ICDP Bosumtwi Crater Drilling Project,An overviewMETEORITICS & PLANETARY SCIENCE, Issue 4-5 2007Christian KOEBERL It is the source crater of the Ivory Coast tektites. The structure was excavated in 2.1,2.2 Gyr old metasediments and metavolcanics of the Birimian Supergroup. A drilling project was conceived that would combine two major scientific interests in this crater: 1) to obtain a complete paleoenvironmental record from the time of crater formation about one million years ago, at a near-equatorial location in Africa for which very few data are available so far, and 2) to obtain a complete record of impactites at the central uplift and in the crater moat, for ground truthing and comparison with other structures. Within the framework of an international and multidisciplinary drilling project led by the International Continental Scientific Drilling Program (ICDP), 16 drill cores were obtained from June to October 2004 at six locations within Lake Bosumtwi, which is 8.5 km in diameter. The 14 sediment cores are currently being investigated for paleoenvironmental indicators. The two impactite cores LB-07A and LB-08A were drilled into the deepest section of the annular moat (540 m) and the flank of the central uplift (450 m), respectively. They are the main subject of this special issue of Meteoritics & Planetary Science, which represents the first detailed presentations of results from the deep drilling into the Bosumtwi impactite sequence. Drilling progressed in both cases through the impact breccia layer into fractured bedrock. LB-07A comprises lithic (in the uppermost part) and suevitic impact breccias with appreciable amounts of impact melt fragments. The lithic clast content is dominated by graywacke, besides various metapelites, quartzite, and a carbonate target component. Shock deformation in the form of quartz grains with planar microdeformations is abundant. First chemical results indicate a number of suevite samples that are strongly enriched in siderophile elements and Mg, but the presence of a definite meteoritic component in these samples cannot be confirmed due to high indigenous values. Core LB-08A comprises suevitic breccia in the uppermost part, followed with depth by a thick sequence of graywacke-dominated metasediment with suevite and a few granitoid dike intercalations. It is assumed that the metasediment package represents bedrock intersected in the flank of the central uplift. Both 7A and 8A suevite intersections differ from suevites outside of the northern crater rim. Deep drilling results confirmed the gross structure of the crater as imaged by the pre-drilling seismic surveys. Borehole geophysical studies conducted in the two boreholes confirmed the low seismic velocities for the post-impact sediments (less than 1800 m/s) and the impactites (2600,3300 m/s). The impactites exhibit very high porosities (up to 30 vol%), which has important implications for mechanical rock stability. The statistical analysis of the velocities and densities reveals a seismically transparent impactite sequence (free of prominent internal reflections). Petrophysical core analyses provide no support for the presence of a homogeneous magnetic unit (= melt breccia) within the center of the structure. Borehole vector magnetic data point to a patchy distribution of highly magnetic rocks within the impactite sequence. The lack of a coherent melt sheet, or indeed of any significant amounts of melt rock in the crater fill, is in contrast to expectations from modeling and pre-drilling geophysics, and presents an interesting problem for comparative studies and requires re-evaluation of existing data from other terrestrial impact craters, as well as modeling parameters. [source] The structural evolution of the Halten Terrace, offshore Mid-Norway: extensional fault growth and strain localisation in a multi-layer brittle,ductile systemBASIN RESEARCH, Issue 2 2010N. Marsh ABSTRACT Tectonic subsidence in rift basins is often characterised by an initial period of slow subsidence (,rift initiation') followed by a period of more rapid subsidence (,rift climax'). Previous work shows that the transition from rift initiation to rift climax can be explained by interactions between the stress fields of growing faults. Despite the prevalence of evaporites throughout the geological record, and the likelihood that the presence of a regionally extensive evaporite layer will introduce an important, sub-horizontal rheological heterogeneity into the upper crust, there have been few studies that document the impact of salt on the localisation of extensional strain in rift basins. Here, we use well-calibrated three-dimensional seismic reflection data to constrain the distribution and timing of fault activity during Early Jurassic,Earliest Cretaceous rifting in the Åsgard area, Halten Terrace, offshore Mid-Norway. Permo-Triassic basement rocks are overlain by a thick sequence of interbedded halite, anhydrite and mudstone. Our results show that rift initiation during the Early Jurassic was characterised by distributed deformation along blind faults within the basement, and by localised deformation along the major Smørbukk and Trestakk faults within the cover. Rift climax and the end of rifting showed continued deformation along the Smørbukk and Trestakk faults, together with initiation of new extensional faults oblique to the main basement trends. We propose that these new faults developed in response to salt movement and/or gravity sliding on the evaporite layer above the tilted basement fault blocks. Rapid strain localisation within the post-salt cover sequence at the onset of rifting is consistent with previous experimental studies that show strain localisation is favoured by the presence of a weak viscous substrate beneath a brittle overburden. [source] Origin and geochemistry of Miocene marine evaporites associated with red beds: Great Kavir Basin, Central IranGEOLOGICAL JOURNAL, Issue 1 2007Hossain Rahimpour-Bonab Abstract During the Cenozoic numerous shallow epicontinental evaporite basins formed due to tectonic movements in the Northern Province of the Central Iran Tectonic Zone (the Great Kavir Basin). During the Miocene, due to sea-level fluctuations, thick sequences of evaporites and carbonates accumulated in these basins that subsequently were overlain by continental red beds. Development of halite evaporites with substantial thickness in this area implies inflow of seawater along the narrow continental rift axis. The early ocean basin development was initiated in Early Eocene time and continued up to the Middle Miocene in the isolated failed rift arms. Competition between marine and non-marine environments, at the edge of the encroaching sea, produced several sequences of both abrupt and gradual transition from continental wadi sediments to marginal marine evaporites in the studied area. These evaporites show well-preserved textures indicative of relatively shallow-brine pools. The high Br content of these evaporites indicates marine-derived parent brines that were under the sporadic influence of freshening by meteoric water or replenishing seawater. However, the association of hopper and cornet textures denotes stratified brine that filled a relatively large pool and prevented rapid variations in the Br profile. Unstable basin conditions that triggered modification of parent brine chemistry prevailed in this basin and caused variable distribution patterns for different elements in the chloride units. The presence of sylvite and the absence of Mg-sulphate/chlorides in the paragenetic sequence indicate SO4,depleted parent brine in the studied sequence. Petrographic examinations along with geochemical analyses on these potash-bearing halites reveal parental brines which were a mixture of seawater and CaCl2 -rich brines. The source of CaCl2 -rich brines is ascribed to the presence of local rift systems in the Great Kavir Basin up to the end of the Early Miocene. Copyright © 2007 John Wiley & Sons, Ltd. [source] Mixed method approaches to the investigation and mapping of buried Quaternary deposits: examples from southern EnglandARCHAEOLOGICAL PROSPECTION, Issue 2 2007Martin R. Bates Abstract The lower reaches of major river valleys usually present archaeologists with considerable problems where thick sequences of stratified alluvium bury archaeology. These situations are typical of the lower reaches of major river systems that are currently under intense pressure from urban development where the archaeological resource is consequently at risk. Here we demonstrate how mixed method approaches, utilizing a range of borehole methods, cone penetration testing and surface and subsurface geophysics coupled with microfossil assessment (Foraminifera/Ostracoda), can be used to model these deposits and predict locations and depths at which important archaeological remains may be located. The novelty of this approach is not in the application of individual techniques to the problem but in the combined methodology, which enables a structured and cost effective programme of works to be formulated and provides the best chance to understand the subsurface. Although this approach has been developed to facilitate the location of archaeological sites buried at depth within the route corridor of development projects it is also suitable for locating fossil-bearing sequences and mapping stratigraphical units in Quaternary science. We demonstrate the approach using two examples from southern England. Copyright © 2007 John Wiley & Sons, Ltd. [source] The Late Weichselian sea level history of the Kullen Peninsula in northwest Skåne, southern SwedenBOREAS, Issue 2 2001PER SANDGREN The Kullen Peninsula in northwest Skåne, at the time of the Weichselian deglaciation an island surrounded by the Kattegat Sea, is the earliest known deglaciated area in Sweden. Sediment stratigraphic and mineral magnetic properties, combined with radiocarbon dating, were used to determine and date the isolation of present-day lake basins from the sea. Significant environmental changes, which reflect the isolations, are supported by previously published palaeoecological data and cannot be related to climate changes. Basins situated above the marine limit (ML) have short (in the order of centimetres) minerogenic sequences that are magnetically characterized by low concentrations of detrital magnetite. In contrast, the pre-isolation sediments in basins below the ML, especially those deposited in sheltered positions in the landscape, have thick sequences (in the order of metres) of authigenic greigite-bearing sediments. Age determinations of the isolation level are based on the AMS radiocarbon dating of terrestrial plant macrofossil remains and previously published pollen stratigraphical investigations. Supported by the upper level of a sandy beach deposit preserved on the generally steep till covered slopes, the marine limit can be determined to 88,89 m a.s.l., which developed at the regional deglaciation c. 17000 calendar years ago. The results indicate that the deglaciation shoreline level remained fairly constant, relative to the sea level, for c. 1000 years and was followed by a gentle regression. The presented shoreline displacement curve from the Kullen Peninsula extends c. 1000 calendar years further back in time than any previously published records from the Swedish west coast. [source] | ||||||||||