Home About us Contact
|
Home About us Contact | ||
|
|
||
Synthetic Scaffold (synthetic + scaffold)
Selected AbstractsAccelerated neuritogenesis and maturation of primary spinal motor neurons in response to nanofibersDEVELOPMENTAL NEUROBIOLOGY, Issue 8 2010Caitlyn C. Gertz Abstract Neuritogenesis, neuronal polarity formation, and maturation of axons and dendrites are strongly influenced by both biochemical and topographical extracellular components. The aim of this study was to elucidate the effects of polylactic acid electrospun fiber topography on primary motor neuron development, because regeneration of motor axons is extremely limited in the central nervous system and could potentially benefit from the implementation of a synthetic scaffold to encourage regrowth. In this analysis, we found that both aligned and randomly oriented submicron fibers significantly accelerated the processes of neuritogenesis and polarity formation of individual cultured motor neurons compared to flat polymer films and glass controls, likely due to restricted lamellipodia formation observed on fibers. In contrast, dendritic maturation and soma spreading were inhibited on fiber substrates after 2 days in vitro. This study is the first to examine the effects of electrospun fiber topography on motor neuron neuritogenesis and polarity formation. Aligned nanofibers were shown to affect the directionality and timing of motor neuron development, providing further evidence for the effective use of electrospun scaffolds in neural regeneration applications. © 2010 Wiley Periodicals, Inc. Develop Neurobiol 70: 589,603, 2010 [source] Synthesis of Dicarboxylate "C-Clamp" 1,2-Diethynylarene Compounds as Potential Transition-Metal Ion HostsEUROPEAN JOURNAL OF ORGANIC CHEMISTRY, Issue 1 2008Erwin Reisner Abstract We report an efficient convergent synthesis of a new type of C-clamp ligand with a 1,2-diethynylarene scaffold involving a chelate host capable of binding a guest molecule in its endo -dicarboxylate pocket. The chemistry involves a combination of palladium-catalyzed Sonogashira, Heck, and Suzuki cross-coupling reactions. The compounds 2,3-bis[2-(2,-carboxybiphenyl-4-yl)ethynyl]triptycene and 4,5-bis[2-(2,-carboxybiphenyl-4-yl)ethynyl]veratrole and their 2,-carboxy- m -terphenyl-4-yl analogues were designed as dinucleating ligands to assemble carboxylate-bridged transition-metal complexes with a windmill geometry. The X-ray crystal structure of one such C-clamp compound containing co-crystallized water molecules reveals strong hydrogen bonds of the aqua guest to the endo -oriented carboxylic acid entities of the C-clamp host. In addition, two syn -N-donor ligands were prepared as a synthetic scaffold to mimic the geometric arrangement of N-donor atoms in carboxylate-bridged dinuclear proteins. (© Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2008) [source] A New Biological Matrix for Septal OcclusionJOURNAL OF INTERVENTIONAL CARDIOLOGY, Issue 2 2003CHRISTIAN JUX, M.D. The ideal septal occluder scaffold should promote the healthiest and most complete healing response possible while eventually facilitating the full resorption of the material, leaving "native" tissue behind. An excellent biocompatibility of the scaffold tissue is a prerequisite for quick, complete, and firm ingrowth of the device, optimizing outcomes and minimizing the potential for complications. Intestinal collagen layer (ICL) is a highly purified (acellular) bioengineered type-1 collagen derived from porcine submucosa. It is gradually resorbed by the host organism and subsequently replaced by the host tissue. CardioSEAL® occluders were modified by substituting the conventional polyester fabric for an intestinal collagen layer (ICL). Percutaneous transcatheter closure of interventionally created atrial septal defects was performed in lambs using these modified occluders. A complete pathomorphological investigation including histology was carried out after 2, 4, and 12 weeks follow-up. Standard CardioSEAL implants served as a control group. After 2 weeks in vivo the devices were already covered completely by neo-endothelium. Compared with the conventional synthetic scaffold, ICL devices showed a quicker endothelialization, decreased thrombogenicity, and superior biocompatibility with no significant cellular infiltration observed in the histology of explants with ICL fabrics. After 3 months in vivo the collagen layer remained mechanically intact, but began to show the first histological signs of mild disintegration, gradual resorption, and remodeling. In conclusion, short-term results from preliminary in vivo experiments using a bioengineered collagen matrix as the occluder tissue scaffold showed excellent biocompatibility. This resulted in superior overall results: quicker endothelialization, a decreased thrombogenicity, and decreased immunological host response. (J Interven Cardiol 2003;16:149,152) [source] Electrospun polylactide/silk fibroin,gelatin composite tubular scaffolds for small-diameter tissue engineering blood vesselsJOURNAL OF APPLIED POLYMER SCIENCE, Issue 4 2009Shudong Wang Abstract Many synthetic scaffolds have been used as vascular substitutes for clinical use. However, many of these scaffolds may not show suitable properties when they are exposed to physiologic vascular environments, and they may fail eventually because of some unexpected conditions. Electrospinning technology offers the potential for controlling the composition, structure, and mechanical properties of scaffolds. In this study, a tubular scaffold (inner diameter = 4.5 mm) composed of a polylactide (PLA) fiber outside layer and a silk fibroin (SF),gelatin fiber inner layer (PLA/SF,gelatin) was fabricated by electrospinning. The morphological, biomechanical, and biological properties of the composite scaffold were examined. The PLA/SF,gelatin composite tubular scaffold possessed a porous structure; the porosity of the scaffold reached 82 ± 2%. The composite scaffold achieved the appropriate breaking strength (1.28 ± 0.21 MPa) and adequate pliability (elasticity up to 41.11 ± 2.17% strain) and possessed a fine suture retention strength (1.07 ± 0.07 N). The burst pressure of the composite scaffold was 111.4 ± 2.6 kPa, which was much higher than the native vessels. A mitochondrial metabolic assay and scanning electron microscopy observations indicated that both 3T3 mouse fibroblasts and human umbilical vein endothelial cells grew and proliferated well on the composite scaffold in vitro after they were cultured for some days. The PLA/SF,gelatin composite tubular scaffolds presented appropriate characteristics to be considered as candidate scaffolds for blood vessel tissue engineering. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009 [source] Biodegradable polymers applied in tissue engineering research: a reviewPOLYMER INTERNATIONAL, Issue 2 2007Monique Martina Abstract Typical applications and research areas of polymeric biomaterials include tissue replacement, tissue augmentation, tissue support, and drug delivery. In many cases the body needs only the temporary presence of a device/biomaterial, in which instance biodegradable and certain partially biodegradable polymeric materials are better alternatives than biostable ones. Recent treatment concepts based on scaffold-based tissue engineering principles differ from standard tissue replacement and drug therapies as the engineered tissue aims not only to repair but also regenerate the target tissue. Cells have been cultured outside the body for many years; however, it has only recently become possible for scientists and engineers to grow complex three-dimensional tissue grafts to meet clinical needs. New generations of scaffolds based on synthetic and natural polymers are being developed and evaluated at a rapid pace, aimed at mimicking the structural characteristics of natural extracellular matrix. This review focuses on scaffolds made of more recently developed synthetic polymers for tissue engineering applications. Currently, the design and fabrication of biodegradable synthetic scaffolds is driven by four material categories: (i) common clinically established polymers, including polyglycolide, polylactides, polycaprolactone; (ii) novel di- and tri-block polymers; (iii) newly synthesized or studied polymeric biomaterials, such as polyorthoester, polyanhydrides, polyhydroxyalkanoate, polypyrroles, poly(ether ester amide)s, elastic shape-memory polymers; and (iv) biomimetic materials, supramolecular polymers formed by self-assembly, and matrices presenting distinctive or a variety of biochemical cues. This paper aims to review the latest developments from a scaffold material perspective, mainly pertaining to categories (ii) and (iii) listed above. Copyright © 2006 Society of Chemical Industry [source] Signal Processing during Developmental Multicellular PatterningBIOTECHNOLOGY PROGRESS, Issue 1 2008Claudiu A. Giurumescu Developing design strategies for tissue engineering and regenerative medicine is limited by our nascent understanding of how cell populations "self-organize" into multicellular structures on synthetic scaffolds. Mechanistic insights can be gleaned from the quantitative analysis of biomolecular signals that drive multicellular patterning during the natural processes of embryonic and adult development. This review describes three critical layers of signal processing that govern multicellular patterning: spatiotemporal presentation of extracellular cues, intracellular signaling networks that mediate crosstalk among extracellular cues, and finally, intranuclear signal integration at the level of transcriptional regulation. At every level in this hierarchy, the quantitative attributes of signals have a profound impact on patterning. We discuss how experiments and mathematical models are being used to uncover these quantitative features and their impact on multicellular phenotype. [source] | |||||||||||||