Home About us Contact
|
Home About us Contact | ||
|
|
||
Surfactant Type (surfactant + type)
Selected AbstractsPolystyrene/Montmorillonite Nanocomposites Prepared by In Situ Intercalative Polymerization: Influence of the Surfactant TypeMACROMOLECULAR CHEMISTRY AND PHYSICS, Issue 17 2004Hisham A. Essawy Abstract Summary: Na-montmorillonite (MMT) with a cation exchange capacity (CEC) of 90 meq/100 g was converted to MMT-CTAB and MMT-CPC by the intercalation of cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC), respectively. The intercalation of CPC onto the basal space of the montmorillonite expanded the basal space from 12.19 to 21.47 Å, whereas in the case of CTAB, the spacing was only expanded to 19.35 Å. The MMT-CPC and MMT-CTAB forms were subsequently used as hosts for the preparation of polystyrene nanocomposites via intercalative free-radical polymerization of styrene. Different structures were obtained by varying the preparation conditions; the exfoliated and intercalated nanocomposites were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA), and differential scanning calorimeter (DSC). The produced nanocomposites exhibited improved thermal stability in comparison with that of pure polystyrene above 400,°C especially in the case of the nanocomposites based on the MMT-CPC, in which intercalation exists. A glass transition temperature (Tg) could not be detected for the prepared nanocomposites using DSC; this was assumed to result from the restricted molecular motion of the polymer chains. XRD pattern of PS nanocomposites prepared by intercalative polymerization. [source] A review of the background, operating parameters and applications of microemulsion liquid chromatography (MELC)JOURNAL OF SEPARATION SCIENCE, JSS, Issue 15 2005A. Marsh Abstract Microemulsions are dispersions of nanometre-sized droplets of an immiscible liquid within another liquid. Droplet formation is facilitated by the addition of surfactants and often also cosurfactants. Microemulsions are classified as either oil-in-water (O/W) (oil droplets such as octane dispersed throughout aqueous buffer) or water-in-oil (W/O) (aqueous droplets in oil such as hexane). Both microemulsion types have been used as mobile phases for separation in microemulsion HPLC (MELC). There has been a recent increase of interest in this area with new applications and developments such as gradient elution and optimisation of methods using experimental design. O/W microemulsions have been employed as eluents for RP-HPLC while W/O microemulsions have been used for normal phase chromatography. Separations can have superior speed and efficiency to conventional HPLC modes while offering a unique selectivity with excellent resolution. The capability for quantitative and stability-indicating analysis has also been demonstrated. Specific advantages include the ability to operate at low UV wavelengths and elimination of the need for an equilibration rinse between gradients. Operational issues associated with the use of MELC have been identified including the need to add salt to the gradient eluent, relatively high back-pressures and increased need for equipment cleaning compared to conventional RP eluent. This report details the different microemulsion types and compositions used and their reported applications. The use of gradient and isocratic elution is described. The effects on separations of varying operating parameters such as temperature, oil type and concentration, surfactant type and concentration, sample solvent, column type, and organic solvent addition will be discussed and illustrated. [source] Effect of surfactant type on the synthesis of PMMA using redox initiation and high frequency ultrasoundPOLYMER ENGINEERING & SCIENCE, Issue 10 2008Cristina Parra In the present work, a study of the effect of the surfactant nature on the synthesis of polymethylmethacrylate (PMMA) obtained by high frequency ultrasonic radiation and redox initiation is presented. The surfactants used were an anionic: sodium lauryl sulfate (SLS) and a nonionic: nonylphenol etoxilated. Different morphologies, particle size, and microstructures were obtained depending on the surfactant concentration (0.5, 1.0, 1.5, and 2.0)%. The highest conversion values of PMMA were obtained with SLS, resulting in a highly syndiotactic polymer. High frequency ultrasound is very efficient when ionic surfactants are used. However, for nonionic surfactants ultrasonic irradiation is very inefficient to initiate polymerization, in this case the effect of redox initiation was very marked increasing polymerization conversion. For this, surfactant blends of PMMA/PEO were obtained when redox initiation was used together with high frequency ultrasound. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers. [source] Effects of surfactant and molecular weight of polyol on grating formation and switching of holographic PDLCPOLYMERS FOR ADVANCED TECHNOLOGIES, Issue 11 2008S. S. Shim Abstract The interposition of surfactants between polymer and liquid crystal (LC) droplets was theoretically predicted by the positive spreading coefficient (0,<,,31) and utilized to interpret the morphology, grating formation kinetics, diffraction efficiency, and switching of the holographic polymer dispersed liquid crystal (HPDLC), prepared from various types (octanoic acid, poly oxyethylene octyl phenyl ether, and perfluoro-1-butanesulfonyl fluoride) and amounts (0,9 wt%) of surfactant and molecular weights of polyol (PPG). Regardless of the surfactant type, diffraction efficiency increased with the addition and increasing amount of surfactant, a tendency consistent with increasing value of spreading coefficient, which is determined by the formulations of grating formation. In contrast, diffraction efficiency showed a maximum with the polypropylene glycol (PPG) molecular weight. Surfactant effectively reduced the anchoring energy and electrically drove the film which otherwise was not driven. Overall, surfactant with greater ,31 gave smaller droplet, greater diffraction efficiency, driving voltage, contrast ratio, and smaller response time. Copyright © 2008 John Wiley & Sons, Ltd. [source] Controlled, radical reversible addition,fragmentation chain-transfer polymerization in high-surfactant-concentration ionic miniemulsionsJOURNAL OF POLYMER SCIENCE (IN TWO SECTIONS), Issue 4 2004J. B. McLeary Abstract Living free-radical polymerization of methacrylate and styrenic monomers with ionic surfactants was carried out with reversible addition,fragmentation chain transfer in miniemulsion with different surfactant types and concentrations. The previously reported problem of phase separation was found to be insignificant at higher surfactant concentrations, and control of the molar mass and polydispersity index was superior to that of published miniemulsion systems. Cationic and anionic surfactants were used to examine the validity of the argument that ionic surfactants interfere with transfer agents. Ionic surfactants were suitable for miniemulsion polymerization under certain conditions. The colloidal stability of the miniemulsions was consistent with the predictions of a specific model. The living character of the polymer that comprised the latex material was shown by its transformation into block copolymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 960,974, 2004 [source] Surfactants, skin cleansing protagonistsJOURNAL OF THE EUROPEAN ACADEMY OF DERMATOLOGY & VENEREOLOGY, Issue 1 2010M Corazza Abstract The correct choice of cosmetic products and cleansers is very important to improve skin hydration, to provide moisturizing benefits and to minimize cutaneous damage caused by surfactants. In fact, surfactants may damage protein structures and solubilize lipids. Soaps, defined as the alkali salts of fatty acids, are the oldest surfactants and are quite aggressive. Syndets (synthetic detergents) vary in composition and surfactant types (anionic, cationic, amphotheric, non-ionic). These new skin cleansing products also contain preservatives, fragrances, and sometimes emollients, humectants and skin nutrients. We present a revision of the literature and discuss recent findings regarding skin cleansers. [source] | ||||||||||