Home About us Contact
|
Home About us Contact | ||
|
|
||
Batch Adsorption Experiments (batch + adsorption_experiment)
Selected AbstractsInsulin transport across porous charged membranes: Effect of the electrostatic interactionBIOTECHNOLOGY PROGRESS, Issue 5 2009Shaoling Zhang Abstract Insulin transport phenomena across a series of porous charged membranes were studied at two pH conditions (pH 3.3 and pH 7.4) in this article. The membranes were prepared by pore-surface modification of porous poly(acrylonitrile) (PAN) membranes by grafting with weak acidic and basic functional groups. The insulin partition coefficient K between the membrane and solution was estimated from the equilibrium adsorption amount in the batch adsorption experiment. The insulin effective diffusion coefficient D inside the membrane was determined as a fitting parameter by matching the diffusion model with the experimental data of the diffusion measurement. Both K and D correlated well with the charge properties of the insulin and membrane: when the insulin and membrane carried opposite net charge, the partition coefficient showed relatively larger values, while the effective diffusion coefficient was reduced. The insulin permeability coefficient P obtained from the experimental results agreed with that estimated from the partition coefficient and effective diffusion coefficient. These results suggested that the combined effects of the solubility and diffusivity on the permeability coefficient complicated the relationship between the permeability and the charge properties of the insulin and membrane. Additionally, our calculation supported that insulin permeability was reduced by the boundary layer between the membrane and solution. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009 [source] The removal of reactive azo dyes by natural and modified zeolitesJOURNAL OF CHEMICAL TECHNOLOGY & BIOTECHNOLOGY, Issue 7 2003B Arma Abstract The adsorption mechanism of three reactive dyes by zeolite has been examined with the aim of identifying the ability of zeolite to remove textile dyes from aqueous solutions. Towards this aim, a series of batch adsorption experiments was carried out, along with determination of the electrokinetic properties of both natural and modified zeolites. The adsorbent in this study is a clinoptilolite from the Gördes region of Turkey. The reactive dyes CI Reactive Black 5, Red 239 and Yellow 176 are typical azo dyes extensively used in textile dyeing. Adsorption tests were carried out as a function of mixing time, solids concentration, dye concentration and pH. The adsorption results indicate that the natural zeolite has a limited adsorption capacity for reactive dyes but is substantially improved upon modifying its surfaces with quaternary amines. An electrostatic adsorption mechanism involving the formation of a bilayer of amine molecules on the clinoptilolite surface onto which anionic dye molecules adsorb, depending on their polarities, is proposed. The results are also supported by electrokinetic measurements. The adsorption data were fitted to the Langmuir isotherm and it was found that the modified sepiolite yields adsorption capacities (qe) of 111, 89 and 61 mg g,1 for Red, Yellow and Black, respectively. These results are comparable to a popular adsorbent, activated carbon. Copyright © 2003 Society of Chemical Industry [source] Equilibrium and kinetic study for the removal of malachite green using activated carbon prepared from Borassus flabellofer male flowerASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING, Issue 3 2010P. E. Jagadeesh Babu Abstract Activated carbon was prepared from dried Borassus flabellofer male flower and batch adsorption experiments were conducted to study its potential to remove malachite green (MG) dye. The process was further optimized by studying the operating variables like initial pH of the stock solution, activation temperature, initial dye concentration, adsorbent loading and contact time. The optimized pH and activation temperatures were found to be 7.55 and 450 °C respectively, where further analysis was made using these optimal variables. Linear, Freundlich and Langmuir isotherms were studied and it was found that the Langmuir isotherms have the highest correlation coefficients compared to the others. Further, the sorption kinetics were analysed using pseudo-first-order and pseudo-second-order kinetic models. The data showed that the second-order equation was the more appropriate, which indicate that the intra-particle diffusion is the rate limiting factor. Copyright © 2009 Curtin University of Technology and John Wiley & Sons, Ltd. [source] Adsorption properties of microwave synthesized inorgano,organo montmorilloniteASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING, Issue 2 2010Miray Emreol Abstract The aim of this study is to determine the adsorption properties of microwave synthesized inorgano,organo montmorillonites. Microwave irradiation is preferred because of its low time and energy consumption properties, forming an advantage in industrial applications. In addition to the intercalation of Keggin and hexadecyltrimethylammonium (HDTMA+) cations, the aging process of pillaring solution was also carried out through the microwave irradiation. Both inorgano clays, namely the parents, and their inorgano,organo derivatives, were prepared by using the same amounts of aluminum by keeping the OH,/Al3+ and Al3+/clay ratios constant. The HDTMA+/clay ratio was changed in inorgano-organo clays (IOCs) during the preparation. The effects of these parameters on the surface properties and adsorption behaviors of the samples were investigated by conducting X-ray diffraction (XRD), Fourier transform infrared (FTIR) and simultaneous thermal analyses (STA), as well as batch adsorption experiments, in which phenol was used as a model pollutant. The results of XRD analyses reveal that the intercalation is successfully achieved. The existence of the Keggin and HDTMA+ cations was observed in FTIR spectra of the samples. Through the STA, it was determined that the existence of organic layer increases the dehydroxylation temperature and the thermal behavior of inorgano-organo montmorillonites strongly depends on the structure of the parent clay. An increase in the adsorption efficiencies with increasing HDTMA+/clay ratio was observed, except with the highest ratio. The behavior of this sample was explained by the formation of the second HDTMA+ layer leading to the hydrophilic surface formation. Copyright © 2009 Curtin University of Technology and John Wiley & Sons, Ltd. [source] Insulin adsorption into porous charged membranes: Effect of the electrostatic interactionBIOTECHNOLOGY PROGRESS, Issue 4 2009Shaoling Zhang Abstract Insulin adsorption into a series of porous charged membranes was investigated by batch adsorption experiments, and the experimental results were analyzed by the homogeneous diffusion model. The membranes used in this study were prepared by pore-surface modification of porous poly(acrylonitrile) (PAN) membranes by grafting with weak acidic and basic functional groups. The amount of insulin adsorbed into the membrane was determined from the material balance of insulin. The insulin partition coefficient K between the membrane and solution was estimated from the equilibrium adsorption amount, and the effective diffusion coefficient D was estimated by matching the model with the experimental data as a fitting parameter. The dependence of K and D on the charge properties of the insulin and membrane is observed and discussed. The partition coefficient K increased when the insulin and the membrane carried opposite charges, on the other hand, the effective diffusion coefficient D was reduced. These results indicate that the electrostatic interaction between the insulin and the membranes played an important role in the insulin adsorption. © 2009 American Institute of Chemical Engineers Biotechnol. Prog. 2009 [source] | ||||||||||